Download for TL-WR810N
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
Setup Video
-
How to Resolve Double NAT using Starlink
-
How to Configure a TP-Link Router with Starlink
-
What should I do if I cannot access the internet? - Using a DSL modem and a TP-Link router
If you can’t access the internet using a DSL modem and TP-Link router, this video can help you solve the problem.
More Fold -
What should I do if I cannot access the internet? - Using a cable modem and a TP-Link router
If you can’t access the internet using a cable modem and TP-Link router, follow this video step by step to solve your problem.
More Fold
FAQs
- How to share network on Tether App
- Brief introduction of Wireless Channel, Channel Width and DFS
- How to use USB sharing function in TL-WR810N_V1
- What if I forget my wireless password of TP-Link Wi-Fi router?
- How to improve my wireless speed or range
- How to setup TP-Link Wi-Fi Router on web management page
- How to choose right TP-Link product for your internet service
- Should I use Dynamic IP or PPPoE？
- How to view and save System Log of TP-Link wireless router
- How to setup TP-Link Wi-Fi Router with Singtel on web management page
- How to setup TP-Link Wi-Fi Router with Singtel on Tether App
- How to reset TP-Link router to factory defaults
- How to connect TP-Link router with Starlink
- What should I do if my internet connection is slow?
- What should I do if the LED of TP-Link router is abnormal?
- How to configure Static Routing on wireless routers
- What are the most frequent asked questions about the TP-Link devices' speed?
- How to bind IP Address and MAC Address on TP-Link Router
- What should I do if wireless connection cannot work on TP-Link Wi-Fi router?
- How to use bandwidth control on TP-Link wireless router
- How do I configure the basic wireless settings for my TP-Link 11N Wireless Router?
- Why My TP-Link Router Can Not Get WAN Parameters From My Modem?
- How to confirm whether the router is connected to internet through Diagnostic function
- How to set up access control for website blocking on TP-Link Wireless Router (older green UI)
- How to Setup DDNS(DynDNS) on Wireless Router
- How to configure Wireless MAC address filter on wireless router
- How to use Parental Control function on Wireless router
- How to find the wireless key on the 11N router
- How to Setup DDNS (No-IP) on TP-Link Wireless Router
- How to protect your TP-Link network devices from potential attacks
- How to do troubleshooting from the system log when PPPoE connection fails
- How to install TP-Link wireless router to work with a DSL Modem (PPPoE)
- How to choose the right working mode for the Nano pocket routers
- How to Upgrade the firmware version of TP-Link Wireless Router
- How to Configure the Wireless Router Mode on TL-WR802N/TL-WR810N
- How to Configure the AP Mode on the TL-WR802N/TL-WR810N
- How to Configure the Client Mode on TL-WR802N/TL-WR810N
- How to Configure the Range Extender/Repeater Mode on the TL-WR802N/TL-WR810N
- Why cannot log into the Management Page with NOD 32 ESET?
- What should I do if I can’t log into web-based interface of my TP-Link device?
- What can I do if I forget the login password of TP-Link Wireless Router?
- What should I do if I cannot find my wireless network or I cannot connect the wireless network ?
- What should I do if I cannot access the internet through Wi-Fi router?
- Troubleshooting: Unstable wireless connection on TP-Link router
- Application Requirement/Choose WAN Connection Type on my TP-Link router
- How do I install TP-Link router to work with a Cable Modem? (Old UI)
- What should I do if my Nano or Travel router cannot work well?
- How do I use the WDS Bridging function to extend my wireless network?
- How do I change the IP address of a TP-Link Wireless Router ?
- How to set up Port forwarding feature on my TP-Link Wireless Router for Xbox Live?
- How do I configure MAC Address Clone on my TP-Link Wireless Router(green UI)?
- Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)?
- How do I configure Remote Management for my TP-Link Wireless Router?
- How do I secure/protect my wireless network by using WPA-PSK/WPA2-PSK on TP-Link Wireless 11N Router?
- Why my TP-Link Router gets a WAN IP from the modem but no internet access？
- Why cannot I access the Internet after successfully connected to the TP-Link router's wireless network(MAC OS)?
- How to configure Address Reservation on TP-Link wireless router
- Application Requirement/Internet Access Control
- How to configure WDS function on TP-Link Wireless Routers(green UI)
- How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
- How do I install TP-Link wireless router to work with a Modem (Static IP)?
- How do I reduce the MTU size on my TP-Link Router?
- Application Requirement/ Parental Control
- How do I secure/protect my wireless network by using WEP encryption on TP-Link wireless 11N Router?
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
160509 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.