Download voor EAP225-Wall
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
-
- Omada SDN Controller Software 4.1.5Windows/Linux_User Guide
- Omada SDN Software Controller 4.2.8(windows&linux)_User Guide
- Omada SDN Software Controller 4.2.4(windows)_User Guide
- Omada SDN Software Controller 4.3.5 (windows&linux)_User Guide
- Wall Plate EAP_Overview of Regulatory Compliance
- Indoor&Outdoor&Wall&Extender AP(EU2_16 Languages)
- Indoor&Outdoor&Wall&Extender AP(EU1_12 Languages)
- SSH Commands Guide for EAPs
- Omada Access Point_User Guide
- Omada Controller Software 3.2.1_User Guide
- Omada Controller Software 3.1.4_User Guide
- Omada Controller Software 3.0.5_Windows/Linux_User Guide
- EAP225-Wall(EU)_V2_Installation Guide
Controller Software
|
Omada_SDN_Controller_v5.14.32.4_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2024-11-15 | Taal: Meertalig | Bestandsgrootte: 241.05 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.32.3_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2024-11-01 | Taal: Meertalig | Bestandsgrootte: 318.62 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.14.32.3_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2024-11-01 | Taal: Meertalig | Bestandsgrootte: 228.80 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.32.3_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2024-11-01 | Taal: Meertalig | Bestandsgrootte: 241.05 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2024-07-10 | Taal: Meertalig | Bestandsgrootte: 230.75 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.14.26.1_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2024-07-10 | Taal: Meertalig | Bestandsgrootte: 317.68 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.14.20.9_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2024-05-27 | Taal: Meertalig | Bestandsgrootte: 317.48 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2024-02-27 | Taal: Meertalig | Bestandsgrootte: 189.79 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2024-02-27 | Taal: Meertalig | Bestandsgrootte: 202.04 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2024-02-05 | Taal: Meertalig | Bestandsgrootte: 283.05 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.12.7_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2023-09-20 | Taal: Meertalig | Bestandsgrootte: 177.25 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.12.7_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2023-09-20 | Taal: Meertalig | Bestandsgrootte: 192.17 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.12.7_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2023-09-20 | Taal: Meertalig | Bestandsgrootte: 273.17 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.9.31_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2023-03-21 | Taal: Meertalig | Bestandsgrootte: 149.89 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.9.31_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2023-03-21 | Taal: Meertalig | Bestandsgrootte: 164.50 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.9.31_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2023-03-13 | Taal: Meertalig | Bestandsgrootte: 244.50 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.9.9_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2023-02-27 | Taal: Meertalig | Bestandsgrootte: 157.42 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.9.9_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2023-02-27 | Taal: Meertalig | Bestandsgrootte: 141.62 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.9.9_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2023-02-22 | Taal: Meertalig | Bestandsgrootte: 237.42 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.8.4_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2023-01-30 | Taal: Meertalig | Bestandsgrootte: 156.32 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.8.4_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2023-01-30 | Taal: Meertalig | Bestandsgrootte: 140.53 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.8.4_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2023-01-06 | Taal: Meertalig | Bestandsgrootte: 236.31 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.7.4_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-11-21 | Taal: Meertalig | Bestandsgrootte: 169.53 KB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.7.4_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-11-21 | Taal: Meertalig | Bestandsgrootte: 153.57 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_V5.7.4_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-11-21 | Taal: Meertalig | Bestandsgrootte: 249.71 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.6.3_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-10-24 | Taal: Meertalig | Bestandsgrootte: 132.77 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.6.3_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-10-24 | Taal: Meertalig | Bestandsgrootte: 145.82 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_V5.6.3_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-09-27 | Taal: Meertalig | Bestandsgrootte: 225.83 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.5.6_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-22 | Taal: Meertalig | Bestandsgrootte: 129.65 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_v5.5.6_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-22 | Taal: Meertalig | Bestandsgrootte: 142.31 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_V5.5.6_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-22 | Taal: Meertalig | Bestandsgrootte: 222.32 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_Controller_v3.2.17_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-18 | Taal: Engels | Bestandsgrootte: 102.22 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44832.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, Debian 8/9 4. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_Controller_V3.2.17_Windows64 |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-18 | Taal: Engels | Bestandsgrootte: 130.34 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44832.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_Controller_V3.2.17_Windows32 |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-18 | Taal: Engels | Bestandsgrootte: 126.30 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44832.
Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_Controller_v3.2.17_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-08-18 | Taal: Engels | Bestandsgrootte: 131.02 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44832.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 8/9. 4. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_SDN_Controller_v5.4.6_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-07-29 | Taal: Engels | Bestandsgrootte: 139.98 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_V5.4.6_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-07-29 | Taal: Engels | Bestandsgrootte: 127.34 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_V5.4.6_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-07-12 | Taal: Engels | Bestandsgrootte: 219.97 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_V5.3.1_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-05-07 | Taal: Engels | Bestandsgrootte: 130.23 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada_SDN_Controller_V5.3.1_Linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2022-05-07 | Taal: Engels | Bestandsgrootte: 138.76 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_V5.3.1_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-05-07 | Taal: Engels | Bestandsgrootte: 218.75 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_SDN_Controller_v5.1.7_Linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-03-22 | Taal: Engels | Bestandsgrootte: 134.20 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
Omada_SDN_Controller_v5.1.7_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-03-22 | Taal: Engels | Bestandsgrootte: 127.55 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
Omada Controller_V5.1.7_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-02-25 | Taal: Engels | Bestandsgrootte: 215.98 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
Omada_Controller_V3.2.16_Windows32 |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-25 | Taal: Engels | Bestandsgrootte: 126.30 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44228 and CVE-2021-45046. Please refer to FAQ 3255 for more details. Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_Controller_v3.2.16_Windows64 |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-25 | Taal: Engels | Bestandsgrootte: 130.35 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44228 and CVE-2021-45046. Please refer to FAQ 3255 for more details. Notes: 1. To use Omada Controller 3.2.X new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. |
||
|
Omada_Controller_v3.2.16_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-25 | Taal: Engels | Bestandsgrootte: 102.23 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44228 and CVE-2021-45046. Please refer to FAQ 3255 for more details.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 4. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
|
||
|
Omada_Controller_v3.2.16_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-25 | Taal: Engels | Bestandsgrootte: 125.25 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Bug Fixed: 1. Upgrade Log4j to 2.17 to fix the vulnerability CVE-2021-44228 and CVE-2021-45046. Please refer to FAQ 3255 for more details.
Notes: 1. To use new features on Omada Controller 3.2.X, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may not be able to run normally. 3. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. 4. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
|
||
|
Omada_SDN_Controller_v5.0.30_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-20 | Taal: Engels | Bestandsgrootte: 99.19 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Please refer to the Installation Guide for dependencies, installation methods, and notes. If you want to import backup file from controller V3.x.x old version to V5.x.x, please upgrade to v4.x.x first then upgrade to v5.x.x as a transit. |
||
|
Omada_SDN_Controller_v5.0.30_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-20 | Taal: Engels | Bestandsgrootte: 97.34 MB |
Besturingssysteem: Ubuntu 16.04/18.04/20.04, Debian 8/9/10 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Please refer to the Installation Guide for dependencies, installation methods, and notes. If you want to import backup file from controller V3.x.x old version to V5.x.x, please upgrade to v4.x.x first then upgrade to v5.x.x as a transit. |
||
|
Omada_Controller_V5.0.30_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2022-01-19 | Taal: Engels | Bestandsgrootte: 129.86 MB |
Besturingssysteem: Windows 7/8/10/11/Server |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. If you want to import a backup file from controller V3.x.x old version to V5.x.x, please upgrade to v4.x.x first then upgrade to v5.x.x as a transit. |
||
|
Omada_SDN_Controller_V4.4.8_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2021-12-17 | Taal: Engels | Bestandsgrootte: 64.43 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, Debian 8/9, CentOS 6/7 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.8_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-12-17 | Taal: Engels | Bestandsgrootte: 62.68 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, Debian 8/9 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.
|
||
|
Omada_SDN_Controller_V4.4.6_Linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2021-10-11 | Taal: Engels | Bestandsgrootte: 64.02 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9. |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.6_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-10-11 | Taal: Engels | Bestandsgrootte: 62.28 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9. |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada Controller_V4.4.6_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2021-09-28 | Taal: Engels | Bestandsgrootte: 94.07 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_Controller_V4.4.4_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2021-08-13 | Taal: Engels | Bestandsgrootte: 94.07 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.4_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-08-13 | Taal: Engels | Bestandsgrootte: 62.28 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9. |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.4_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2021-08-13 | Taal: Engels | Bestandsgrootte: 63.90 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Debian 8/9. |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_Controller_V4.4.3_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2021-07-01 | Taal: Engels | Bestandsgrootte: 94.06 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.3_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-07-01 | Taal: Engels | Bestandsgrootte: 62.27 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, Debian 8/9 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.4.3_linux_x64.tar.gz |
Download | |
|---|---|---|
| Publicatiedatum: 2021-07-01 | Taal: Engels | Bestandsgrootte: 63.90 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, Debian 8/9, CentOS 6/7 |
||
|
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon. |
||
|
Omada_SDN_Controller_V4.3.5_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-05-07 | Taal: Engels | Bestandsgrootte: 59.39 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon. |
||
|
Omada_SDN_Controller_V4.3.5_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2021-05-07 | Taal: Engels | Bestandsgrootte: 60.90 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian. |
||
|
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon. |
||
|
Omada_Controller_V4.3.5_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2021-04-27 | Taal: Engels | Bestandsgrootte: 91.11 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon. |
||
|
Omada_SDN_Controller_V4.2.11_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2021-02-09 | Taal: Engels | Bestandsgrootte: 58.43 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.2.11_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2021-02-09 | Taal: Engels | Bestandsgrootte: 59.91 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
|
||
|
Omada_Controller_V4.2.11_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2021-02-09 | Taal: Engels | Bestandsgrootte: 90.12 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_Controller_V3.2.14_Linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-25 | Taal: Engels | Bestandsgrootte: 125.65MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian |
||
|
Omada_Controller_V3.2.14_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-25 | Taal: Engels | Bestandsgrootte: 99.43MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
Omada_Controller_V3.2.14_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-25 | Taal: Engels | Bestandsgrootte: 120.55MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.14_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-25 | Taal: Engels | Bestandsgrootte: 124.47MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_SDN_Controller_V4.2.8_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-11 | Taal: Engels | Bestandsgrootte: 90.11 MB |
Besturingssysteem: Win7/8/10/Server |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.2.8_linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-11 | Taal: Engels | Bestandsgrootte: 58.42 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.2.8_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-12-11 | Taal: Engels | Bestandsgrootte: 59.91 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.2.4_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-11-10 | Taal: Engels | Bestandsgrootte: 59.89 MB |
Besturingssysteem: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9 |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller. |
||
|
Omada_Controller_V4.2.4_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2020-11-03 | Taal: Engels | Bestandsgrootte: 90.09 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.1.5_linux_x64_tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-07-13 | Taal: Engels | Bestandsgrootte: 56.54 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_SDN_Controller_V4.1.5_linux_x64_deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-07-13 | Taal: Engels | Bestandsgrootte: 55.11 MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_Controller_V4.1.5_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2020-07-06 | Taal: Engels | Bestandsgrootte: 86.72 MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
If you are planning to upgrade from the old controller to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. |
||
|
Omada_Controller_V3.2.10_linux_x64_deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-20 | Taal: Engels | Bestandsgrootte: 99.4MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.10_linux_x64_tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-20 | Taal: Engels | Bestandsgrootte: 125.64MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.10_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-20 | Taal: Engels | Bestandsgrootte: 120.54MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.10_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-20 | Taal: Engels | Bestandsgrootte: 124.46MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.9_linux_x64_tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-09 | Taal: Engels | Bestandsgrootte: 123.36MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.9_linux_x64_deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-04-09 | Taal: Engels | Bestandsgrootte: 99.39MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
|
Omada_Controller_V3.2.7_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-21 | Taal: Engels | Bestandsgrootte: 120.53MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.7_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-21 | Taal: Engels | Bestandsgrootte: 124.45MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.6_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-16 | Taal: Engels | Bestandsgrootte: 123.35MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.6_linux_x64_deb |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-16 | Taal: Engels | Bestandsgrootte: 99.4MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.6_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-09 | Taal: Engels | Bestandsgrootte: 120.53MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.6_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2020-01-09 | Taal: Engels | Bestandsgrootte: 124.44MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.4_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2019-11-08 | Taal: Engels | Bestandsgrootte: 99.4MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.4_Linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2019-11-08 | Taal: Engels | Bestandsgrootte: 123.35MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.4_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-11-08 | Taal: Engels | Bestandsgrootte: 120.52MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.4_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-11-08 | Taal: Engels | Bestandsgrootte: 124.43MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.1_linux_x64.tar |
Download | |
|---|---|---|
| Publicatiedatum: 2019-07-26 | Taal: Engels | Bestandsgrootte: 123.15MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8. |
||
|
Omada_Controller_V3.2.1_Linux_x64.deb |
Download | |
|---|---|---|
| Publicatiedatum: 2019-07-26 | Taal: Engels | Bestandsgrootte: 99.23MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04/Debian 9.8 |
||
|
Omada_Controller_V3.2.1_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-07-04 | Taal: Engels | Bestandsgrootte: 124.2MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.2.1_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-07-04 | Taal: Engels | Bestandsgrootte: 120.29MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.1.4_Windows32bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-03-08 | Taal: Engels | Bestandsgrootte: 123.6MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.1.4_Windows64bit |
Download | |
|---|---|---|
| Publicatiedatum: 2019-03-08 | Taal: Engels | Bestandsgrootte: 127.5MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.0.5_Windows32bit(deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-11-08 | Taal: Engels | Bestandsgrootte: 122.14MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
New Feature/Enhancement: 1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list. 2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization 7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.
Bug Fixed: 1. Fixed the bug that Omada Controller may not display normally in IE browser. 2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser. 3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser. 4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP. 5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
|
Omada_Controller_V3.0.5_Windows64bit(deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-11-08 | Taal: Engels | Bestandsgrootte: 126.05MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
New Feature/Enhancement: 1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list. 2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization 7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.
Bug Fixed: 1. Fixed the bug that Omada Controller may not display normally in IE browser. 2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser. 3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser. 4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP. 5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
|
Omada_Controller_V3.0.5_Linux_x64.deb (deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-11-08 | Taal: Engels | Bestandsgrootte: 102.25MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04 |
||
|
New Feature/Enhancement: 1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list. 2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization 7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.
Bug Fixed: 1. Fixed the bug that Omada Controller Linux may fail to self-start with system. 2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error. 3. Fixed the bug that Omada Controller may not display normally in IE browser. 4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser. 5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser. 6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option. 7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally. 3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8. |
||
|
Omada_Controller_v3.0.5_linux_x64.tar.gz (deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-11-08 | Taal: Engels | Bestandsgrootte: 127.91MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above |
||
|
New Feature/Enhancement: 1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list. 2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization 7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.
Bug Fixed: 1. Fixed the bug that Omada Controller Linux may fail to self-start with system. 2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error. 3. Fixed the bug that Omada Controller may not display normally in IE browser. 4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser. 5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser. 6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option. 7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as (!@#$%^&*).
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally. 3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8. |
||
|
unpublish from website |
Download | |
|---|---|---|
| Publicatiedatum: 2018-09-30 | Taal: Engels | Bestandsgrootte: 122.11MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.0.4_Windows32bit New Feature/Enhancement:
2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization
Bug Fixed: 1. Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
|
unpublished from website |
Download | |
|---|---|---|
| Publicatiedatum: 2018-09-30 | Taal: Engels | Bestandsgrootte: 126.02MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
Omada_Controller_V3.0.4_Windows64bit New Feature/Enhancement:
2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations. 3. Prevent Operator users from viewing Device Account information. 4. Display AP channels in the AP list. 5. Interchange Map and Statistic page. 6. UI Optimization
Bug Fixed: 1. Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other. 2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
|
Omada_Controller_V3.0.2_Linux_x64.deb(deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-09-05 | Taal: Engels | Bestandsgrootte: 102.27MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04 |
||
|
New Feature/Enhancement: 1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently. 2. Support Omada APP management method. (You can manage Omada Controller with Omada APP) 3. Support EAP firmware online upgrade function. 4. Support configuration/data files auto backup function. 5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time. 6. Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (When you are using External RADIUS Server Portal function with External Web Portal) 7. Batch Upgrade function now will only take effect to EAP which belong to the current site. 8. UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function. 9. Start Omada Controller via jsvc to realize Root Privilege separation function. (For deb installation package, it will create a non-root account called omada to run Omada Controller in default. 10. Change the default port of mongod from 27017 to 27217.
Bug Fixed: 1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties. 2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally. 3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8. |
||
|
Omada_Controller_V3.0.2_Linux_x64.tar.gz(deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-09-05 | Taal: Engels | Bestandsgrootte: 128.47MB |
Besturingssysteem: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above |
||
|
New Feature/Enhancement: 1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently. 2. Support Omada APP management method. (You can manage Omada Controller with Omada APP) 3. Support EAP firmware online upgrade function. 4. Support configuration/data files auto backup function. 5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time. 6. Start Omada Controller via jsvc to realize Root Privilege separation function. (For tar.gz installation package, Omada Controller will be operated in root mode. But you can modify the OMADA_USER in bin/control.sh to assign another non-root account to run Omada Controller instead.) 7. Change the default port of mongod from 27017 to 27217.
Bug Fixed: 1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties. 2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally. 3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above. 4. Built-in JRE 1.8 Java environment. 5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8. |
||
|
Omada_Controller_V3.0.2_Windows32bit(deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-08-17 | Taal: Engels | Bestandsgrootte: 122.13MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
New Feature/Enhancement: 1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently. 2.Support Omada APP management method. (You can manage Omada Controller with Omada APP) 3.Support EAP firmware online upgrade function. 4.Support configuration/data files auto backup function. 5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time. 6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal) 7.Batch Upgrade function now will only take effect to EAP which belong to the current site. 8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function. 9.Various known bug fixes.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
|
Omada_Controller_V3.0.2_Windows64bit (deleted too old) |
Download | |
|---|---|---|
| Publicatiedatum: 2018-08-17 | Taal: Engels | Bestandsgrootte: 126.04MB |
Besturingssysteem: Windows 7/8/10/Server |
||
|
New Feature/Enhancement: 1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently. 2.Support Omada APP management method. (You can manage Omada Controller with Omada APP) 3.Support EAP firmware online upgrade function. 4.Support configuration/data files auto backup function. 5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time. 6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal) 7.Batch Upgrade function now will only take effect to EAP which belong to the current site. 8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function. 9.Various known bug fixes.
Notes: 1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version. 2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version. 3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version. |
||
Omada Discovery Utility
|
Omada Discovery Utility 5.2.1 |
Download | |
|---|---|---|
| Publicatiedatum: 2024-08-05 | Taal: Engels | Bestandsgrootte: 40.51 MB |
Besturingssysteem: Windows/Mac OS/Linux |
||
|
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
|
Omada Discovery Utility 5.2.0 |
Download | |
|---|---|---|
| Publicatiedatum: 2024-05-06 | Taal: Engels | Bestandsgrootte: 40.04 MB |
Besturingssysteem: Windows/Mac OS/Linux |
||
|
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.14.20. 2. Added support for Easy Managed Switch and OLT device identification and inform url. |
||
|
Omada Discovery Utility 5.1.1 |
Download | |
|---|---|---|
| Publicatiedatum: 2023-12-26 | Taal: Engels | Bestandsgrootte: 40.06 MB |
Besturingssysteem: Windows/Mac OS/Linux |
||
|
New Feature/Enhancement: Note: |
||
|
Omada Discovery Utility 5.0.8 |
Download | |
|---|---|---|
| Publicatiedatum: 2021-12-29 | Taal: Engels | Bestandsgrootte: 44.31 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.0, support new device protocol and new inform url format
Bug fixed: 1. Upgrade log4j version to 2.16.0 to avoid remote code execution vulnerability in Apache log4j2. 2. Fixed the bug that the actual issued IP address is inconsistent with the configuration. 3. Fixed the bug that batch IP is issued to multiple devices continuously, but not all of them are actually issued. 4. Fixed the bug that when a port conflict is detected, the prompt message is not centered and the display is incomplete.
Note: 1. Omada CBC v5 must use this version of Omada Discovery Utility due to the change of the inform url format. 2. Double click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
|
Omada Discovery Utility 4.2.4 |
Download | |
|---|---|---|
| Publicatiedatum: 2020-11-09 | Taal: Engels | Bestandsgrootte: 33.16 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
New Feature/Enhancement: 1. Support to discover the gateway and switch that support Omada SDN platform. 2. Add timeout mechanism during adopting the devices.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
|
Omada Discovery Utility 4.1.4 |
Download | |
|---|---|---|
| Publicatiedatum: 2020-07-07 | Taal: Engels | Bestandsgrootte: 31.11 MB |
Besturingssysteem: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
|
New Feature/Enhancement: 1. Fully adapted to Omada SDN Controller v4.1.4. 2. Support to discover the gateway and switch that support Omada SDN platform.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
|
Omada Discovery Utility_v2.0.0_Mac |
Download | |
|---|---|---|
| Publicatiedatum: 2018-07-24 | Taal: Engels | Bestandsgrootte: 84.16 MB |
Besturingssysteem: Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
|
New Feature/Enhancement: |
||
|
EAP Discovery_V1.0.3_Windows |
Download | |
|---|---|---|
| Publicatiedatum: 2018-01-05 | Taal: Engels | Bestandsgrootte: 3.39MB |
Besturingssysteem: WinXP/Vista/7/8/8.1/10/Server2008/Server2012 |
||
|
|
||
Setup Video
-
How to Install the Wall Plate Access Point with Mounting Bracket (EAP615-Wall for demonstration)
This video will show you how to install your Wall Plate Access Point with Mounting Bracket, using EAP615-Wall for demonstration.
More Fold -
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold -
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
More Fold -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold -
How to Set Wireless SSID for Different Users via Omada SDN Controller
This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.
More Fold -
How to Configure No Authentication Portal via Omada SDN Controller
This video will show you how to configure No Authentication Portal via the Omada SDN Controller.
More Fold -
How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller
This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.
More Fold -
How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller
This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.
More Fold -
How to Configure Fast Roaming via the Omada SDN Controller
This video will show you how to configure Fast Roaming via the Omada SDN Controller.
More Fold -
How to Build an Omada Mesh Network via the Omada SDN Controller
This video will show you how to build an omada mesh network via the Omada SDN Controller.
More Fold -
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
More Fold -
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
More Fold -
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
More Fold -
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
More Fold -
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
More Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
FAQs
- Instructions for SSID security settings on Omada Controller
- How to configure MAC-Based Authentication on Omada Controller
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- What can I do If Omada App can’t find my AP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure ACL on Omada AP via Omada Controller
- How to configure abnormal on Omada Pro Controller
- Understanding and implementing Minimum RSSI
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to configure guest network on Omada Controller
- Typical SSH commands for Omada AP troubleshooting
- Troubleshooting: AP goes offline abnormally
- How to configure 802.11r to speed up the roaming process
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Common questions about TP-Link EAP device when it’s used in home network
- Frequently asked questions of Omada SDN solution related to upgrading and management
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Frequently asked questions of EAP Series Access Points
- Troubleshooting for Wireless Client Cannot Access the Internet
- How to Configure SSID & Client Rate Limit on Omada Controller
- Unable to connect to EAP WiFi
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- Announcement on Discontinuation of Facebook Wi-Fi
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 4.1.5 or above)
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- API and Code Sample for External Portal Server (Omada Controller 4.1.5 to 4.4.6)
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- What is 2FA and how to use it in Omada platform
- How to Configure Portal Authentication on Omada Controller
- How to configure Management VLAN in Standalone mode for EAP
- How to configure MAC filtering for EAP in Controller mode
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to Configure Voucher Authentication on Omada Controller
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- How to configure the WLAN Group function on the SDN Controller(New UI)
- How to set the PVID/VLAN ID for the second port on the EAP
- How to disable 5GHz WiFi for Omada EAP
- What if I forget the password of EAP Controller?
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
EAP225-Wall(EU)_V2_5.0.3 Build 20210604 |
Download | |
|---|---|---|
| Publicatiedatum: 2021-07-13 | Taal: Engels | Bestandsgrootte: 7.12 MB |
|
This firmware fully adapts the Omada SDN platform but only compatible with Omada Controller v4.1.5 or above. If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide |
||
|
EAP225-Wall(EU)_V2_5.0.2 Build 20210316 |
Download | |
|---|---|---|
| Publicatiedatum: 2021-04-27 | Taal: Engels | Bestandsgrootte: 7.11 MB |
|
This firmware fully adapts the Omada SDN platform but only compatible with Omada Controller v4.1.5 or above. If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide |
||
|
EAP225-Wall(EU)_V2_5.0.0 Build 20200918 |
Download | |
|---|---|---|
| Publicatiedatum: 2020-11-11 | Taal: Engels | Bestandsgrootte: 7.10 MB |
|
This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well. Please follow Upgrade Guide to upgrade the Omada Controller. |
||
|
EAP225-Wall(EU)_V2_1.20.0 Build 20200422 |
Download | |
|---|---|---|
| Publicatiedatum: 2020-07-06 | Taal: Engels | Bestandsgrootte: 7.05 MB |
|
This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above. If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well, and please follow Upgrade Guide to upgrade Omada controller. If your EAP is working standalone, please note that the EAP will be reset after upgrading to this firmware and you need to re-configure your EAP. |
||
|
EAP225-Wall(EU)_V2_1.4.0 Build 20191213 |
Download | |
|---|---|---|
| Publicatiedatum: 2020-03-02 | Taal: Engels | Bestandsgrootte: 7.60 MB |
|
EAP225-Wall(EU)_V2_1.3.1 Build 20191022 |
Download | |
|---|---|---|
| Publicatiedatum: 2019-12-11 | Taal: Engels | Bestandsgrootte: 7.59 MB |
|
Recommended Controller Software Version: Omada Controller v3.2.x or above |
||
|
EAP225-Wall(EU)_V2_1.3.0 Build 20190722 |
Download | |
|---|---|---|
| Publicatiedatum: 2019-11-08 | Taal: Engels | Bestandsgrootte: 7.59 MB |
|
Recommended Controller Software Version: Omada Controller v3.2.x or above
New Feature/Enhancement: 1. Change the OpenSSL version to 1.0.2q. 2. Optimize UI, including character optimization and display error correction.
Bug Fixed: 1. Fixed the bug that client devices can pass the portal authentication after disconnected from the Controller. 2. Fixed the bug that untag packets can be transferred to SSIDs with different VLANs. 5. Fixed the bug that some EAPs may disconnect from the Omada Controller in large scale network. 6. Fixed the bug that the management page may not be accessed after EAP is disconnected from the Controller. 7. Fixed the bug that when APs are disconnected from Controller, the rate limit configuration will be not issued to these APs after they are back to connected again. 8. Fixed the bug that when the time of EAP is synchronized with PC, it will be the same as PC's time not considering different time zones. 9. Fixed the bug that packets with VLAN tag can be forwarded to the SSID without wireless VLAN setting.
Notes: 1. For EAP225-Wall v2 only. 2. Your device's configuration won't be lost after upgrading. 3. This version of firmware is applied to Omada APP of version 2.1.X or above. |
||
|
EAP225-Wall(EU)_V2_1.2.0 Build 20190222 |
Download | |
|---|---|---|
| Publicatiedatum: 2019-03-21 | Taal: Engels | Bestandsgrootte: 7.24 MB |
|
Recommended Controller Software Version: Omada Controller v3.1.x or above
New Feature/Enhancement: 1. Add Radius Accounting to External Radius Server in standalone mode. 2. Add SSID Radius accounting to WPA-Enterprise security mode. 3. Add SSL encryption in Auto Mail of Log Settings. 4. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4. 5. Support SSID MAC Authentication to none security mode with Controller 3.1.4. 6. Support channel utilization function with Controller 3.1.4. 7. Support Layer-3 Accessibility in SSH with Controller 3.1.4. 8. Change the rule of the LED when resetting/rebooting EAP.
Notes: 1. For EAP225-wall v2 only. 2. Your device's configuration won't be lost after upgrading. 3. This version of firmware is applied to Omada APP of version 2.1.X or above. |
||
|
EAP225-Wall(EU)_V2_1.1.0 Build 20181122 |
Download | |
|---|---|---|
| Publicatiedatum: 2018-12-14 | Taal: Engels | Bestandsgrootte: 8.48 MB |
|
Recommended Controller Software Version: Omada Controller v3.0.x or above
New Feature/Enhancement: 1. Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode. 2. The SSID isolation function is promoted to the Guest Network Function. Wireless Clients connected with Guest SSID can’t communicate with each other and the local network. 3. Change the HTTP port of Portal authentication page from 80 to 22080 in standalone mode. 4. Add More Client Detail Log in standalone mode. 5. UI optimization.
Bug Fixed: 1. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when Omada Controller and Omada EAP belong to different subnet. 2. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet. 3. Fixed the bug that when we change the IP in standalone mode, the portal authentication page may not pop up successfully. 4. Fixed the bug that the wireless clients may not be redirected to portal authentication page by surfing HTTPS website if we enable Management VLAN function. 5. Fixed the bug that wireless clients connected with 2.4G SSID of EAP may receive broadcast packets from other VLAN. 6. Fixed the bug that the rate limit of Portal function may not take effect sometimes. 7. Fixed the bug that we may not login to the https web management page of EAP in standalone mode on MacBook.
Notes: 1. For EAP225-Wall v2 only. 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP225-Wall(EU)_V2_1.0.0 Build 20180418 |
Download | |
|---|---|---|
| Publicatiedatum: 2018-08-07 | Taal: Engels | Bestandsgrootte: 8.43 MB |
|
Recommended Controller Software Version: Omada Controller v 2.6.x or above New Features/Improvements: First firmware released for EAP225-Wall(EU)_V2 Notes: 1. EAP225-Wall(EU)_V2 2. Your device's configuration won't be lost after upgrading |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.
GPL Code
Q&A
Feature Configuration Guide
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP