Download voor T2600G-18TS V2

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2600G-18TS(UN)_V2_Datasheet

Manual

MIBs Files

T2600G-18TS(UN)_V2_MIB_20180710

Download

Publicatiedatum: 2019-05-13

Taal: Engels

Bestandsgrootte: 206.12 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Download

Publicatiedatum: 2019-03-13

Taal: Engels

Bestandsgrootte: 3.10 MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486205
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480156
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024131571
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022365439
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325641
How to configure the DHCP Relay in TP-Link Switch 06-27-2022256685
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022164286
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111060
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290252
How to manage the switch with Mac via Micro USB cable 06-24-202249563
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159814
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133775
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668975

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-18TS(UN)_V2_20200304

Download

Publicatiedatum: 2020-10-21

Taal: Engels

Bestandsgrootte: 9.26 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-18TS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-18TS(UN)_V2_190516

Download

Publicatiedatum: 2019-07-17

Taal: Engels

Bestandsgrootte: 9.06 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T2600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-18TS(UN)_V2_180710

Download

Publicatiedatum: 2018-08-01

Taal: Engels

Bestandsgrootte: 7.82 MB

Modifications and Bug Fixes: First firmware released.
Notes: For T2600G-18TS(UN) V2.0

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T2600G-18TS_V2_GPL

Emulators

Firmware versie	Working Mode	Taal
180919	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

From United States?

Get products, events and services for your region.

START Other Option

Download voor T2600G-18TS V2

MIBs Files

802.1X Client

Driver

FAQs

Firmware

To Upgrade

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Open Source Code voor Programmeerders (GPL)

GPL Code

Emulators

Q&A

Feature Configuration Guide