Download voor T2600G-28MPS
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
MIBs Files
|
T2600G-28MPS(UN)_V3_MIB_20180301 |
Download | |
|---|---|---|
| Publicatiedatum: 2018-03-14 | Taal: Engels | Bestandsgrootte: 200.26 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
|
||
802.1X Client
|
TP-LINK_802.1X_Client_Software |
Download | |
|---|---|---|
| Publicatiedatum: 2017-09-05 | Taal: Engels | Bestandsgrootte: 5.5MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Driver
|
TP-LINK_USB_Console_Driver |
Download | |
|---|---|---|
| Publicatiedatum: 2019-03-13 | Taal: Engels | Bestandsgrootte: 3.10 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Notes: For TP-LINK switches with USB Console port |
||
FAQs
- How to configure MSTP on L2 Managed switches using the new GUI
- How to configure STP/RSTP on L2 Managed switches using the new GUI
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure DHCP Interface Relay on L2 Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting Instruction of TP-Link switch’s SFP port
- The difference between the Voice VLAN feature and Auto VOIP feature
- How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to access TP-Link JetStream Managed Switch via the Console port
- How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
- How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch
- How to configure the DHCP Relay in TP-Link Switch
- How to configure the default gateway of the smart and L2 managed switches using the new GUI
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI
- How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI
- How to configure VLAN VPN on L2 Managed switches using the new GUI
- How to configure Access Control to block users' access to the switch using the new GUI
- How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI
- How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI
- Why are some functions lost after I log in to the switch?
- How to configure MAC ACL on Smart and L2 Managed switches using the new GUI
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
T2600G-28MPS(UN)_V3_20181101 |
Download | |
|---|---|---|
| Publicatiedatum: 2018-12-11 | Taal: Engels | Bestandsgrootte: 10.90 MB |
|
Modifications and Bug Fixes: Notes: |
||
|
T2600G-28MPS(UN)_V3_20180301 |
Download | |
|---|---|---|
| Publicatiedatum: 2018-03-14 | Taal: Engels | Bestandsgrootte: 10.88 MB |
|
Modifications and Bug Fixes Notes 2. If your device's Hardwaer Version is 2.0, after upgrading to this firmware, the old configuration will be lost. |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Emulators
Firmware versie |
Working Mode |
Taal |
|
|---|---|---|---|
180301(UN) |
- |
Engels |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.
Q&A
- Supported Public MIBs for TP-Link Switches
- Q&A_Ethernet Switching
- Q&A_Basic Configuration
- Q&A_Hardware
- Q&A_Interface and Device Management
- Q&A_Selecting Mounting Brackets
Feature Configuration Guide
- Conguring SNMP & RMON
- Key Points of Managing the Switch via SNMP
- Access Rights of Different User Account Types
- Managing System
- Configuration Guide for Accessing the Switch Securely
- Configuration Guide for Packet Content ACL
- Configuring PPPoE ID Insertion
- Configuring L2PT
- Configuring Access Security
- Accessing the Switch
- Configuring Layer 2 Multicast
- Configuring System Logs
- Configuring DLDP
- Configuring Port Security
- Configuring DoS Defend
- Configuring IPv6 IMPB
- Configuring IPv4 IMPB
- Configuring DHCP Filter
- Configuring ACL
- Configuring AAA
- Configuring 802.1x
- Configuring VLAN VPN
- Configuring Spanning Tree
- Configuring Protocol VLAN
- Configuring Private VLAN
- Configuring MAC VLAN
- Configuring GVRP
- Configuring OAM
- Configuring Layer3 Interface
- Configuring sFlow
- Mirroring Traffic
- Monitoring Traffic
- Monitoring the System
- Configuring Routing
- Managing Physical Interface
- Configuring MAC Address
- Configuring LAG
- Configuring DHCP T1600G&T2600G
- Configuring ARP
- Diagnosing the Device & Network
- Configuring LLDP
- Configuring 802.1Q VLAN
- Configuring QoS_T2600G&T1600G-52TS v3&T1600G_52PS v3
- Configuring SNMP & RMON
- Lightning Protection Guide
- Configuration Guide for 802.1X VLAN Assignment and MAB