Download voor T2600G-52TS | TP Link België

MIBs Files

T2600G-52TS(UN)_V3_MIB_20180202

Download

Publicatiedatum: 2018-03-14

Taal: Engels

Bestandsgrootte: 198.78 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-52TS(UN)_v3_MIB_20171103

Download

Publicatiedatum: 2018-01-02

Taal: Engels

Bestandsgrootte: 187.27 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Download

Publicatiedatum: 2019-03-13

Taal: Engels

Bestandsgrootte: 3.10 MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202463720
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024163604
How to configure LACP on our Smart/ Managed Switch 10-29-2024236929
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202482521
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024175173
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476364
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462901
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259484
What is the Console Cable and the line sequence of it? 08-02-2024129265
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486461
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480365
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024146425
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024350328
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489630
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479370
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024132176
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022366143
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022423405
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128831
How to limit the port rate of the incoming traffic via ACL function 06-28-202259538
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185852
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022326210
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022229283
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327641
How to configure MAC ACL on Smart/Managed switch 06-28-202285343
How to configure the DHCP Relay in TP-Link Switch 06-27-2022257035
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022164700
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111300
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259515
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202266358
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271263
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290457
How to manage the switch with Mac via Micro USB cable 06-24-202249758
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202160023
Why are some functions lost after I log in to the switch? 07-20-202149417
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860607
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133990
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201669147
How to configure Extended IP ACL 04-28-201285780

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-52TS(UN)_V3_20200304

Download

Publicatiedatum: 2021-03-12

Taal: Engels

Bestandsgrootte: 11.30 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login in for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing the reset option from Bootutil.
4. Add a built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address-table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-52TS(UN) V3.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-52TS(UN)_V3_181101

Download

Publicatiedatum: 2018-12-11

Taal: Engels

Bestandsgrootte: 10.87 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Add the CLI command of "switchport general allowed vlan all/no switchport general allowed vlan all".
3. Support EtherLike-Mib.
4. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode.
5. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
6. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
7. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T2600G-52TS(UN) V3.0.
2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-52TS(UN)_V3_180202

Download

Publicatiedatum: 2018-03-14

Taal: Engels

Bestandsgrootte: 10.86 MB

Modifications and Bug Fixes
1. Fix the problem of client's unicast DHCP Request packet will flooding when enable DHCP Server.
2. Fix the problem of using Web to add the Action first time after binding ACL rules.
3. Fix the problem of SNMP set one wrong OID of the Port Mirror may crash the switch.
4. Fix the problem of shutdown of Storm Control can't be saved.
5. Fix the problem of the configuration of Protocol VLAN binding to all ports will be lost after rebooting.

Notes
1. For T2600G-52TS(UN) V3.0

2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T2600G-52TS_V3_GPL

Download voor T2600G-52TS V3

MIBs Files

802.1X Client

Driver

FAQs

Firmware

To Upgrade

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Open Source Code voor Programmeerders (GPL)

GPL Code

Q&A

Feature Configuration Guide