Download voor TL-SG2210P
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
Gigabit Smart PoE Switch met 8 aansluitingen en 2 SFP sleuvenOmada Discovery Utility
|
Omada Discovery Utility 5.2.1 |
Download | |
|---|---|---|
| Publicatiedatum: 2024-08-05 | Taal: Engels | Bestandsgrootte: 40.51 MB |
Besturingssysteem: Windows/Mac OS/Linux |
||
|
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
||
MIBs Files
|
TP-Link_L2 Switch_MIB |
Download | |
|---|---|---|
| Publicatiedatum: 2024-02-29 | Taal: Engels | Bestandsgrootte: 199.18 KB |
Besturingssysteem: Windows/Mac OS/Linux |
||
|
|
||
|
TL-SG2210P_V1_MIB_160218 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-02-18 | Taal: Engels | Bestandsgrootte: 82 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For TL-SG2210P(UN)_v1 and subsequent versions. |
||
|
TL-SG2210P_V1_MIB_160118 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-18 | Taal: Engels | Bestandsgrootte: 100 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: for TL-SG2210P_V1_160118 |
||
|
TL-SG2210P_V1_MIB_150928 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-12-21 | Taal: Engels | Bestandsgrootte: 93 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For TL-SG2210P_V1_150928 |
||
|
TL-SG2210P_V1_MIB_150427 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-04-27 | Taal: Engels | Bestandsgrootte: 94 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG2210P_V1_150427 |
||
|
TL-SG2210P_V1_MIB_140702 |
Download | |
|---|---|---|
| Publicatiedatum: 2014-07-02 | Taal: Engels | Bestandsgrootte: 83 KB |
Besturingssysteem: WinXP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG2210P V1 140702 and subsequent versions |
||
|
TL-SG2210P_V1_MIB_140409 |
Download | |
|---|---|---|
| Publicatiedatum: 2014-04-09 | Taal: Engels | Bestandsgrootte: 83 KB |
Besturingssysteem: WinXP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG2210P V1 140409 and subsequent versions |
||
FAQs
- Troubleshooting for Voice VLAN and Auto VoIP
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure LACP on our Smart/ Managed Switch
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Jumbo Frame on Omada Controller
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- Why my PoE powered device cannot work properly when connected to the PoE Switch？
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
- How to configure switch as DHCP server on Standalone mode
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to choose PoE switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-SG2210P(UN)_V1_160912 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-09-12 | Taal: Engels | Bestandsgrootte: 3.75 MB |
|
Modifications and Bug Fixes: Added the LLDP Forward Message feature.Notes: 1.ForTL-SG2210P(UN)_V1; |
||
|
TL-SG2210P_V1_160218 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-02-18 | Taal: Engels | Bestandsgrootte: 3.66 MB |
|
Modifications and Bug Fixes: Improved the stability and performance of the switch.Notes: 1.ForTL-SG2210P(UN)_v1;2.Your device’s configuration won't be lost after upgrading. |
||
|
TL-SG2210P(UN)_V1_160118 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-18 | Taal: Engels | Bestandsgrootte: 3.66 MB |
|
Modifications and Bug Fixes: New Features/Enhancement：1.Improved security level. 2.Added the switch to select SSL versions,including SSL3.0 and TLS1.0. 3.Added the switch for telnet,http,https.Http and https interfaces can not be shutdown simultaneously. 4.Added the switch for encryption algorithms of SSH and SSL. 5.Configuration by different management interfaces are divided by TCP port independently. 6. RRCP command added Bug fixed: 1. Fixed the bug RRCP packets won't be forwarded 2. Fixed the bug of loopback detection 3. Fixed the bug that the web GUI would not accessable if management IP changed 4. Fixed the bug that VLAN configuration will lost when reboot the device 5. Fixed the bug that there will be broadcast storm while initiliaze the device Notes: 1. For TL-SG2210P_V12. Your device’s configuration won't be lost after upgrading,which means you needn't to configure your device again after upgrading |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.