Download voor TL-SG5428
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
JetStream™ Gigabit L2 Managed Switch met 24 poorten en 4 SFP-sleuvenMIBs Files
|
TL-SG5428_V1_MIB_150129 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-01-29 | Taal: Engels | Bestandsgrootte: 99 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/Mac/Linux |
||
|
Notes: For TL-SG5428_V1_150129 |
||
|
TL-SG5428_V1_MIB(2) |
Download | |
|---|---|---|
| Publicatiedatum: 2013-03-01 | Taal: Engels | Bestandsgrootte: 87 KB |
|
Notes: For TL-SG5428_V1_20120419 |
||
802.1X Client
|
TP-LINK_802.1X_Client_Software |
Download | |
|---|---|---|
| Publicatiedatum: 2013-09-26 | Taal: Engels | Bestandsgrootte: 1.78 MB |
Besturingssysteem: Win2000/XP/2003/Vista/7 |
||
|
|
||
FAQs
- How to configure LACP on our Smart/ Managed Switch
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- What is the Console Cable and the line sequence of it?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to access TP-Link JetStream Managed Switch via the Console port
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI
- How to configure port security function
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches
- How to limit the port rate of the incoming traffic via ACL function
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure VLAN VPN on L2 Managed switches using the old GUI
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-SG5428_V1_150129 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-01-29 | Taal: Engels | Bestandsgrootte: 4.12 MB |
|
Modifications and Bug Fixes: New Features/Enhancement: Notes: 1. For TL-SG5428(UN)REV1.0.0 |
||
|
TL-SG5428_V1_140430 |
Download | |
|---|---|---|
| Publicatiedatum: 2014-04-30 | Taal: Engels | Bestandsgrootte: 4.12 MB |
|
Modifications and Bug Fixes:
Notes: For TL-SG5428 V1 |
||
|
TL-SG5428_V1_130716 |
Download | |
|---|---|---|
| Publicatiedatum: 2013-07-16 | Taal: Engels | Bestandsgrootte: 3.86 MB |
|
Modifications and Bug Fixes:
Notes: For TL-SG5428 v1 |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.