Download voor VIGI NVR1008H V2

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT:  Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Product Overview
Manual
VIGI 8 Channel Network Video Recorder
VIGI NVR1008H

VIGI Security Manager

VIGI VMS

VIGI VMS is a software platform designed to effectively manage surveillance devices and users from multiple sites in a unified and intuitive manner.

VIGI Config Tool

Setup Video

  • Introduction to Install VIGI Products and Overview of Three Management Methods

    This video shows how to install VIGI products and introduces three management methods. VIGI products are easy to be installed, and with three management methods, you can customize the management systems to suit your specific needs.

    More Fold

  • How to Setup Tapo Wireless Camera with VIGI NVR

    00:00 - Introduction 00:08 - Connection Diagram 00:13 - Setting up the Tapo camera ONVIF account 00:37 - Adding the Tapo camera in the VIGI NVR 02:36 - Fix Tapo camera IP address on router 03:00 - Controlling the Tapo camera from the NVR

    More Fold

  • How to Manage VIGI Cameras and NVRs Using VIGI Security Manager

    This video demonstrates how to manage VIGI cameras and NVRs using VIGI Security Manager in two scenarios: • using VIGI Security Manager in your local network • using VIGI Security Manager remotely THIS VIDEO APPLIES TO: All VIGI Cameras and NVRs

    More Fold

  • How to Manage VIGI Cameras via VIGI NVR

    This video demonstrates how to manage VIGI cameras via VIGI NVR. It consists of three steps: • Connect the hardware. • Set up VIGI NVR and add VIGI cameras. • Bind VIGI NVR to TP-Link ID for remote management. THIS VIDEO APPLIES TO: • All VIGI Products

    More Fold

  • How to Manage VIGI Cameras and NVRs via VIGI App

    This video demonstrates how to manage VIGI cameras and NVRs via the VIGI app. It consists of three steps: • Launch the VIGI app. • Add devices using the VIGI app. • View the recordings and configure the settings. • Enable alerts to get instant alerts This video applies to: • All VIGI VIGI Cameras and NVRs

    More Fold

Feature Filter: Alle VIGI AppVIGI OthersConfiguration GuideFurther AssistanceVIGI NVRBefore You BuyWhen You Set UpVIGI Security ManagerVIGI Camera

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

Apps

VIGI App

TP-Link VIGI allows you to easily add, configure, monitor, and control your VIGI devices.

Emulators

Firmware versie
Working Mode
Taal
.240119.
-
Engels
VIGI NVR-20221209
-
Engels

Note:

1.  The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3.  The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.