Download voor AC50
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
Database
AC_1.0.6_Database |
Download | |
---|---|---|
Publicatiedatum: 2017-05-10 | Taal: Engels | Bestandsgrootte: 279.85KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
Notes:
|
FAQs
- How to Set Up a Wireless Network Using TP-Link AC/CAP Serial Products
- How to Configure MAC Authentication Function on TP-LINK CAP/AC Serial Products
- How to Configure Load Balance Function on TP-Link CAP/AC Serial Products
- How to Configure Band Steering Function on TP-Link CAP/AC Serial Products
- How to Configure Dual-link Backup Function on TP-Link CAP/AC Serial Products
- How to Upgrade the CAPs Using the TP-LINK AC Controller
- How to Upgrade the AP Database for TP-LINK AC Controller
- How to configure Onekey Online authentication on TP-Link CAP/AC serial product
- How to Configure Web Authentication (Local Authentication Server & Local Web Server) on TP-Link CAP/AC Serial Products
- How to Configure Web Authentication (Remote Authentication Server & Local Web Server) on TP-Link CAP/AC Serial Products
- How to Manage CAPs in Different subnets Using TP-Link AC Controller (Using TP-Link AC Controller as the DHCP Server for the CAPs)
- How to Manage CAPs at Different Sites across Internet Using TP-LINK AC Controller (with VPN Tunnel)
- How to Manage CAPs at Different Sites across the Internet Using TP-LINK AC Controller (with NAT Port Forwarding)
- How to Manage CAPs in Different VLANs Using TP-Link AC controller
- How to Configure Remote Portal Authentication (Remote Web Server & Local Authentication Server) on TP-Link CAP/AC Serial Products
- How to Configure Remote Portal Authentication (Remote Web Server & Remote Authentication Server) on TP-Link CAP/AC Serial Products
- How to Manage CAPs in Different Subnets Using TP-Link AC Controller (Using L3 Switch as the DHCP Server for the CAPs)
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
AC50(UN)_v1_190527 |
Download | |
---|---|---|
Publicatiedatum: 2019-06-28 | Taal: Engels | Bestandsgrootte: 8.85 MB |
Modifications and Bug Fixes: 1. Fixed the bug that the logger process hangs up abnormally, causing the log not refresh. 2. Update the OpenSSL software to version 1.0.2q to support TLS v1.1 and TLS v1.2 3. Fixed some security issues.
Note: For AC50(UN) 1.0 only. |
AC50(UN)_V1_180524 |
Download | |
---|---|---|
Publicatiedatum: 2019-02-13 | Taal: Engels | Bestandsgrootte: 8.81 MB |
Modifications and Bug Fixes: |
AC50(UN)_v1_171129 |
Download | |
---|---|---|
Publicatiedatum: 2018-02-09 | Taal: Engels | Bestandsgrootte: 8.81 MB |
Modifications and Bug Fixes: Note: 2. When you see the SYS LED is flashing slowly and the web page becomes stuck during the upgrading, please allow a few minutes for the firmware to upgrade on your AC50 and DO NOT cut off the power. Otherwise, the device might be damaged. |
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
GPL Code
Emulatoren
Firmwareversie |
Working Mode |
Taal |
|
---|---|---|---|
171218 |
- |
Engels |
|
161027 |
- |
Engels |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.