Download voor EAP225-Wall V2

IMPORTANT:  Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Product Overview
Document

Controller Software

Omada Discovery Utility

Setup Video

  • How to Install the Wall Plate Access Point with Mounting Bracket (EAP615-Wall for demonstration)

    This video will show you how to install your Wall Plate Access Point with Mounting Bracket, using EAP615-Wall for demonstration.

    More Fold
  • How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller

    This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL

    More Fold
  • How to Install and Set Up Omada Software Controller

    This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.

    More Fold
  • How to Adopt Omada Devices via Omada Controller

    This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).

    More Fold
  • How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller

    This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.

    More Fold
  • How to Monitor and Manage Devices via Omada SDN Controller

    This video will show you how to monitor and manage devices via Omada SDN Controller.

    More Fold
  • How to Configure Schedules to Automate Network Control via Omada SDN Controller

    This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.

    More Fold
  • How to Monitor and Manage Clients via Omada SDN Controller

    This video will show you how to monitor and manage clients via Omada SDN Controller.

    More Fold
  • How to Check the Clients Signal Strength and Estimate the Actual Speed

    This video will show you how to check the client signal strength and estimate actual network speeds.

    More Fold
  • How to Create User Accounts on Omada SDN Controller

    This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.

    More Fold
  • How to Set Wireless SSID for Different Users via Omada SDN Controller

    This video will show you how to set wireless SSIDs for different users via the Omada SDN Controller.

    More Fold
  • How to Configure No Authentication Portal via Omada SDN Controller

    This video will show you how to configure No Authentication Portal via the Omada SDN Controller.

    More Fold
  • How to Configure Voucher Portal for Different Privilege Users via Omada SDN Controller

    This video will show you how to configure the voucher portal for users with different privileges via the Omada Software Controller.

    More Fold
  • How to Use Heat Maps to Deploy Your Network via the Omada SDN Controller

    This video will show you how to use heat maps to deploy your network via the Omada SDN Controller.

    More Fold
  • How to Configure Fast Roaming via the Omada SDN Controller

    This video will show you how to configure Fast Roaming via the Omada SDN Controller.

    More Fold
  • How to Build an Omada Mesh Network via the Omada SDN Controller

    This video will show you how to build an omada mesh network via the Omada SDN Controller.

    More Fold
  • How to Configure Bandwidth Control via Omada SDN Controller

    This video will show you how to configure bandwidth control via Omada SDN Controller.

    More Fold
  • How to manage TP-Link EAPs centrally via the Software Controller

    This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
    • Install the Software
    • Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
    • Configure Software Controller

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Software Controller
    • Mass EAPs (usually more than three)

    More Fold
  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    More Fold
  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    More Fold
  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    More Fold
  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    More Fold

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.