Download voor T1500G-10MPS | TP-Link Nederland

MIBs Files

T1500G-10MPS(UN)_V2_MIB_20180530

Download

Publicatiedatum: 2019-05-13

Taal: Engels

Bestandsgrootte: 206.21 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202481354
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024163247
How to configure LACP on our Smart/ Managed Switch 10-29-2024236557
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024174884
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462801
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259081
How to build a Wireless Network for Chain Store using tp-link products 08-02-202465232
How to build a Wireless Network for School Canteen using tp-link products 08-02-202468902
What is the function we can configure when the switch is managed by Omada SDN Controller? 07-23-202468119
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486288
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480227
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024349748
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489531
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479259
What are the differences in features and application scenarios among various serial switches? 07-01-2024230464
How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch 06-29-2022571049
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128632
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282882
How to configure 802.1q VLAN on Smart Switches 06-29-2022148440
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022229059
How to configure RSTP on TP-Link switches using the old GUI 06-28-2022110121
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327286
How to configure MAC ACL on Smart/Managed switch 06-28-202285189
How to choose PoE switch 06-28-2022110580
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022183210
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022164399
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111144
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259428
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271134
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202262533
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290308
Why are some functions lost after I log in to the switch? 07-20-202149344
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860498
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133809

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1500G-10MPS(UN)_V2_20200805

Download

Publicatiedatum: 2020-09-22

Taal: Engels

Bestandsgrootte: 8.31 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1500G-10MPS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1500G-10MPS(UN)_V2_20200109

Download

Publicatiedatum: 2020-04-20

Taal: Engels

Bestandsgrootte: 9.15 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-10MPS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-10MPS(UN)_V2_190424

Download

Publicatiedatum: 2019-07-25

Taal: Engels

Bestandsgrootte: 8.84 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-10MPS(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T1500G-10MPS(UN)_V2_GPL

Emulatoren

Firmwareversie	Working Mode	Taal
180420	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Download voor T1500G-10MPS V2

MIBs Files

802.1X Client

FAQs

Firmware

To Upgrade

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Open Source Code voor Programmeerders (GPL)

GPL Code

Emulatoren

Q&A

Feature Configuration Guide