Download voor T1600G-52TS V4

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T1600G-52TS(UN)_V4_Datasheet

Document

MIBs Files

T1600G-52TS(UN)_v4_MIB_20190321		Download
Publicatiedatum: 2019-09-25	Taal: Engels	Bestandsgrootte: 200.17 KB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T1600G-52TS(UN)_V4_MIB_20180716		Download
Publicatiedatum: 2019-05-13	Taal: Engels	Bestandsgrootte: 206.12 KB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software		Download
Publicatiedatum: 2017-09-05	Taal: Engels	Bestandsgrootte: 5.5MB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024233648
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202475162
Why the firmware version does not change after upgrading in T Series switches? 08-09-202461915
How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024222160
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024255601
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202478938
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024344854
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488436
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478180
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022126686
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202281545
How to configure 802.1q VLAN on Smart Switches 06-29-2022147124
How to limit the port rate of the incoming traffic via ACL function 06-28-202258523
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022183573
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022322357
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022323942
How to configure MAC ACL on Smart/Managed switch 06-28-202284036
How to configure the DHCP Relay in TP-Link Switch 06-27-2022254622
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022109937
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289205
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202158468
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132372
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668055
How to configure Extended IP ACL 04-28-201284361

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1600G-52TS(UN)_V4_20200918.		Download
Publicatiedatum: 2021-05-21	Taal: Engels	Bestandsgrootte: 8.67 MB
ew Features/Enhancements: Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller. Notes: 1. For T1600G-52TS(UN) V4.0 2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading. 3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1600G-52TS(UN)-V4-20200109		Download
Publicatiedatum: 2020-03-27	Taal: Engels	Bestandsgrootte: 9.49 MB
New Features/Enhancements: 1. Add the feature that needs to change the password when login for the first time. 2. Add the feature that can choose not to change the IP address when resetting the switch. 3. Add "service reset-disable" for removing reset option from Bootutil. 4. Add built-in Telnet client which allows the switch can telnet other devices. 5. Allow disabling HTTP and HTTPS for access types at the same time. 6. Optimize the password character set to support more special characters. 7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 8. Optimized the CLI display of MVR configurations. 9. Support to display MVR members of inactive and active groups. 10. Support to view/clear mac-address table on port/VLAN. 11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP. Notes: 1. For T1600G-52TS(UN) V4.0 2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading. 3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-52TS(UN)_V4_20190516		Download
Publicatiedatum: 2019-07-04	Taal: Engels	Bestandsgrootte: 9.71 MB
Modifications and Bug Fixes: 1. Update HTTPS to support TLS1.2. 2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function. 3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode. 4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time. 5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel. 6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: For T1600G-52TS(UN) V4.0.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T1600G-52TS(UN)_V4_GPL

Emulatoren

Firmwareversie	Working Mode	Taal
180716	-	Engels	Browsen
180716	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Q&A

Feature Configuration Guide

From United States?

Get products, events and services for your region.

START Other Option