Download voor T2500G-10TS V2

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2500G-10TS(UN)_V2_Datasheet

Document

MIBs Files

T2500G-10TS(UN)_v2_MIB_20190531

Download

Publicatiedatum: 2019-09-25

Taal: Engels

Bestandsgrootte: 200.33 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Download

Publicatiedatum: 2019-03-13

Taal: Engels

Bestandsgrootte: 3.10 MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202463260
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202480946
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202485859
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202479873
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024348396
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022364295
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022324840
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022110802
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290019
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159463
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133459

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2500G-10TS(UN)_V2_20200110

Download

Publicatiedatum: 2020-03-27

Taal: Engels

Bestandsgrootte: 9.65 MB

Modifications and Bug Fixes:
Fix the bug that CPU will reach 90% if close the telnet connection when changing the password for first logining switch through telnet.

Notes:
1. For T2500G-10TS(UN) V2.0.
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

T2500G-10TS(UN)_V2_20191122

Download

Publicatiedatum: 2019-12-31

Taal: Engels

Bestandsgrootte: 9.65 MB

New Features/Enhancements:
1. Add L2+ features included Static Routing, ARP, DHCP Server and Ethernet OAM.
2. Add the feature that needs to change password when login for the first time.
3. Add the feature that can choose not to change the IP address when resetting the switch.
4. Add "service reset-disable" for removing reset option from Bootutil.
5. Add built-in Telnet client which allows the switch can telnet other devices.
6. Allow disabling HTTP and HTTPS for access types at the same time.
7. Optimize the password character set to support more special characters.
8. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
9. Optimized the CLI display of MVR configurations.
10. Support to display MVR members of inactive and active groups.
11. Support to view/clear mac-address table on port/VLAN.
12. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.

Notes:
1. For T2500G-10TS(UN) V2.0.
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2500G-10TS(UN)_V2_20190531

Download

Publicatiedatum: 2019-07-15

Taal: Engels

Bestandsgrootte: 9.42 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T2500G-10TS(UN) V2.0.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T2500G-10TS(UN)_V2_GPL

Emulatoren

Firmwareversie	Working Mode	Taal
181022(UN)	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

From United States?

Get products, events and services for your region.

START Other Option

Download voor T2500G-10TS V2

MIBs Files

802.1X Client

Driver

FAQs

Firmware

To Upgrade

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Open Source Code voor Programmeerders (GPL)

GPL Code

Emulatoren

Q&A

Feature Configuration Guide