Download voor T2600G-28SQ V1

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2600G-28SQ(UN)_V1_Datasheet

Document

JetStream 28-poorts Gigabit SFP L2 Managed Switch
T2600G-28SQ

MIBs Files

T2600G-28SQ(UN)_V1_MIB_20190530

Download

Publicatiedatum: 2019-08-02

Taal: Engels

Bestandsgrootte: 199.17 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Download

Publicatiedatum: 2019-03-13

Taal: Engels

Bestandsgrootte: 3.10 MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024163589
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202482514
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024175153
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486451
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480357
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024146412
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024132159
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022326193
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022229270
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022183441
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022164664
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111293
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259512
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202266351
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271258
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202262645
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290443
How to manage the switch with Mac via Micro USB cable 06-24-202249750
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202160018
Why are some functions lost after I log in to the switch? 07-20-202149414
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860596

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28SQ(UN)_V1_1.0.6 Build 20230227

Download

Publicatiedatum: 2023-03-10

Taal: Engels

Bestandsgrootte: 14.78 MB

New Features/Enhancements:

1. Fixed some issues to enhance security.

Notes:
1. For T2600G-28SQ(UN) V1.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-28SQ(UN)_V1_20200304

Download

Publicatiedatum: 2020-09-23

Taal: Engels

Bestandsgrootte: 14.11 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-28SQ(UN) V1.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-28SQ(UN)_v1_20190530

Download

Publicatiedatum: 2019-07-11

Taal: Engels

Bestandsgrootte: 14.93 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T2600G-28SQ(UN) V1.0.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.