Download voor T2600G-28TS V3

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2600G-28TS(UN)_V3_Datasheet

Document

MIBs Files

T2600G-28TS(UN)_V3_MIB_20180202		Download
Publicatiedatum: 2018-03-14	Taal: Engels	Bestandsgrootte: 198.78 KB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-28TS(UN)_v3_MIB_20171103		Download
Publicatiedatum: 2018-01-02	Taal: Engels	Bestandsgrootte: 187.27 KB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac

802.1X Client

TP-LINK_802.1X_Client_Software		Download
Publicatiedatum: 2017-09-05	Taal: Engels	Bestandsgrootte: 5.5MB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver		Download
Publicatiedatum: 2019-03-13	Taal: Engels	Bestandsgrootte: 3.10 MB
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10
Notes: For TP-LINK switches with USB Console port

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202462482
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202479908
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024160324
How to configure LACP on our Smart/ Managed Switch 10-29-2024233648
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202480945
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024172599
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202475162
Why the firmware version does not change after upgrading in T Series switches? 08-09-202461915
How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024222160
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024255601
What is the Console Cable and the line sequence of it? 08-02-2024126860
How to build a Campus Network using TP-LINK products 08-02-202493023
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202484764
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202478938
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024144658
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024344854
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488436
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478180
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022360609
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022419766
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022126686
How to limit the port rate of the incoming traffic via ACL function 06-28-202258523
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022183573
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022322357
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022226903
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022323942
How to configure MAC ACL on Smart/Managed switch 06-28-202284036
How to configure the DHCP Relay in TP-Link Switch 06-27-2022254622
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022161556
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022109937
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202258480
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202265129
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202270093
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202261418
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289205
Why are some functions lost after I log in to the switch? 07-20-202148625
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201859547
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132372
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668055
How to configure Extended IP ACL 04-28-201284361

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28TS(UN)_V3_181101		Download
Publicatiedatum: 2018-12-11	Taal: Engels	Bestandsgrootte: 10.90 MB
Modifications and Bug Fixes: 1. Enhanced the MVR function. 2. Add the CLI command of "switchport general allowed vlan all/no switchport general allowed vlan all". 3. Support EtherLike-Mib. 4. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode. 5. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time. 6. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 7. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: 1. For T2600G-28TS(UN) V3.0. 2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-28TS(UN)_V3_180201		Download
Publicatiedatum: 2018-03-14	Taal: Engels	Bestandsgrootte: 10.87 MB
Modifications and Bug Fixes 1. Fix the problem of client's unicast DHCP Request packet will flooding when enable DHCP Server. 2. Fix the problem of using Web to add the Action first time after binding ACL rules. 3. Fix the problem of SNMP set one wrong OID of the Port Mirror may crash the switch. 4. Fix the problem of shutdown of Storm Control can't be saved. 5. Fix the problem of the configuration of Protocol VLAN binding to all ports will be lost after rebooting. Notes 1. For T2600G-28TS(UN) V3.0 2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

GPL Code

T2600G-28TS_V3_GPL

Emulatoren

Firmwareversie	Working Mode	Taal
180322(UN)	-	Engels	Browsen
180322(UN)	-	Engels	Browsen

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Q&A

Feature Configuration Guide

From United States?

Get products, events and services for your region.

START Other Option