Download voor T2600G-52TS V2

Selecteer uw hardware versie:

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2600G-52TS_V2_Datasheet

Document

T2600G-52TS

MIBs Files

T2600G-52TS(UN)_V2_MIB_170323

Download

Publicatiedatum: 2017-03-23

Taal: Engels

Bestandsgrootte: 196.45 KB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Publicatiedatum: 2017-09-05

Taal: Engels

Bestandsgrootte: 5.5MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Download

Publicatiedatum: 2019-03-13

Taal: Engels

Bestandsgrootte: 3.10 MB

Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024236550
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476241
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462799
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259076
What is the Console Cable and the line sequence of it? 08-02-2024129063
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480227
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024349739
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489531
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479256
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024131734
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022365625
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022423057
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128629
How to limit the port rate of the incoming traffic via ACL function 06-28-202259421
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185631
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325815
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327277
How to configure MAC ACL on Smart/Managed switch 06-28-202285187
How to configure the DHCP Relay in TP-Link Switch 06-27-2022256773
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022183206
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111142
How to manage the switch with Mac via Micro USB cable 06-24-202249616
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159882
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133809
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201669039
How to configure Extended IP ACL 04-28-201285628

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-52TS(UN)_V2_20201103

Download

Publicatiedatum: 2021-03-12

Taal: Engels

Bestandsgrootte: 10.77 MB

Modifications and Bug Fixes:
1. Optimize the performance to avoid memory overflow when entering too long SNMP host command characters in CLI mode.
2. Optimize the performance to avoid memory overflow when entering too long password in CLI mode.
3. Optimize the performance to avoid memory overflow when entering too long characters in telnet mode or the telnet command exceeds the width of the telnet window.
4. Optimize the performance to avoid memory overflow when using too long characters to access the switch with the URL tool.

Notes:
1. For T2600G-52TS(UN) V2.0.

T2600G-52TS(UN)_V2_170323

Download

Publicatiedatum: 2017-03-23

Taal: Engels

Bestandsgrootte: 10.68 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1.Optimized the CLI function.
2.Added new features, including VLAN-based loopback detection, LACP Passthrough, DHCP VLAN relay, packet content ACL, Dynamic VLAN Assignment, MAC based 802.1x, LLDPDU Pass through, NAS ID configuration, QinQ Missdrop and so on.
3.Added basic functions of SNMP. Functions such as cable diagnostic, serial number display, TFTP firmware upgrade can be configured through SNMP.

Notes:

For T2600G-52TS(UN) 2.0

Gebruik van Firmware van Derde Partijen in TP-Link Producten

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.

Open Source Code voor Programmeerders (GPL)

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.