Download voor T3700G-28TQ
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
JetStream Gigabit Stackable L3 Managed Switch met 28 aansluitingenMIBs Files
|
T3700G-28TQ(UN)_V1_MIB_160112 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-12 | Taal: Engels | Bestandsgrootte: 127 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T3700G-28TQ_V1_160112. |
||
|
T3700G-28TQ_V1_MIB_150313 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-03-13 | Taal: Engels | Bestandsgrootte: 122 KB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
||
802.1X Client
|
TP-LINK_802.1X_Client_Software |
Download | |
|---|---|---|
| Publicatiedatum: 2017-09-05 | Taal: Engels | Bestandsgrootte: 5.5MB |
Besturingssysteem: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
FAQs
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to configure LACP on our Smart/ Managed Switch
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- Why the firmware version does not change after upgrading in T Series switches?
- How to Upgrade Firmware of a Switch via the Bootutil Menu
- How to configure the default gateway of the smart and managed switches using the old GUI
- What is the Console Cable and the line sequence of it?
- How to build a Factory Network using TP-Link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Dormitory using tp-link products
- How to set up an Enterprise VPN using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- The difference between the Voice VLAN feature and Auto VOIP feature
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to enter the BootUtil Menu to factory reset the switch with the console cable
- How to access TP-Link JetStream Managed Switch via the Console port
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
- How to configure VLAN VPN on L2 Managed switches using the old GUI
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to configure the DHCP Relay in TP-Link Switch
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI
- How to manage the switch with Mac via Micro USB cable
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
T3700G-28TQ(UN)_V1_160112 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-01-12 | Taal: Engels | Bestandsgrootte: 5.36 MB |
|
Modifications and Bug Fixes: New Features/Enhancement 1.fixed the stacking failure problem by NTP settings. 2.Improved StabilityNotes: For T3700G-28TQ V1. |
||
|
T3700G-28TQ_V1_MIB_150313 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-03-13 | Taal: Engels | Bestandsgrootte: 122 KB |
|
Notes: For T3700G-28TQ V1 150313 and subsequent versions. |
||
|
T3700G-28TQ_V1_20150313 |
Download | |
|---|---|---|
| Publicatiedatum: 2015-03-13 | Taal: Engels | Bestandsgrootte: 5.36 MB |
|
Modifications and Bug Fixes: Enhancement： 1.Improved the stability of stacking feature. Bug fixed: 1.Fixed the bug that when more than 2 ports are enabled LACP and the peer switch has one port with LACP disabled,the port status is suggested to be set as 0x5. 2.Fixed the bug that the hardware routing table of the stacking system crashes after about twenty minutes if there is a large number of ARP entries transferring frequently. 3.Fixed the bug that aggregated ports act abnormal after changing unit ID. 4.Fixed the bug that when stacked T3700 acts as an DHCP server,its routing table can not transfer correctly when a large number of clients renew/release dynamic IP address frequently. 5.Fixed the bug that process hangs out when two PCs managing T3700 and checking the routing table using telnet simultaneously. Notes: 1. For T3700G-28TQ_V1 2. Old firmware’s configuration file can be imported into this new firmware. 3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading. |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Emulatoren
Firmwareversie |
Working Mode |
Taal |
|
|---|---|---|---|
150313 |
- |
Engels |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.