Download voor TL-WR802N
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
3.0_1492671859954r.jpg)
Setup Video
-
How to Resolve Double NAT using Starlink
-
How to Configure a TP-Link Router with Starlink
-
What should I do if I cannot access the internet? - Using a DSL modem and a TP-Link router
If you can’t access the internet using a DSL modem and TP-Link router, this video can help you solve the problem.
More Fold -
What should I do if I cannot access the internet? - Using a cable modem and a TP-Link router
If you can’t access the internet using a cable modem and TP-Link router, follow this video step by step to solve your problem.
More Fold
FAQs
- Brief introduction of Wireless Channel, Channel Width and DFS
- What if I forget my wireless password of TP-Link Wi-Fi router?
- How to setup TP-Link Wi-Fi Router on web management page
- How to setup TP-Link Wi-Fi Router with Singtel on web management page
- How to setup TP-Link Wi-Fi Router with Singtel on Tether App
- How to connect TP-Link router with Starlink
- What should I do if my internet connection is slow?
- What should I do if the LED of TP-Link router is abnormal?
- What should I do if wireless connection cannot work on TP-Link Wi-Fi router?
- How to configure Bandwidth Control on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to Avoid Double NAT When DSL Modem Router and Wireless Router are Used Together
- Why My TP-Link Router Can Not Get WAN Parameters From My Modem?
- How to Setup DDNS(DynDNS) on Wireless Router
- How to Configure MAC Address Clone on TP-Link Mini Pocket Router
- How to Setup DDNS (No-IP) on TP-Link Wireless Router
- How to select the operating mode of TP-Link wireless multiple modes devices
- How to install TP-Link wireless router to work with a DSL Modem (PPPoE)
- How to choose the right working mode for the Nano pocket routers
- How to Configure the Hotspot Router Mode on the TL-WR802N
- How to configure Wireless MAC Filtering on TL-WR802N/WR810N (except for client mode-new logo)
- How to set system time on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to configure Dynamic DNS on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to configure IP&MAC Binding on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to configure Virtual Servers on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to setup Local and Remote Management rules on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to configure Address Reservation on TL-WR802N/WR810N (new logo)
- How do I install TL-WR802N/WR810N to work with a DSL modem (Static IP-new logo)?
- How to configure Access Control on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- How to configure Parental Controls on TL-WR802N/WR810N (standard router and hotspot router mode-new logo)
- What should I do if I can’t log into web-based interface of my TP-Link device?
- What should I do if I cannot find my wireless network or I cannot connect the wireless network ?
- Application Requirement/Choose WAN Connection Type on my TP-Link router
- How do I install TL-WR802N/WR810N to work with a DSL modem (PPPoE-new logo)?
- How do I install TL-WR802N/WR810N to work with a cable modem (new logo)?
- How do I install TP-Link router to work with a Cable Modem? (Old UI)
- What should I do if my Nano or Travel router cannot work well?
- How do I use the WDS Bridging function to extend my wireless network?
- How do I install TL-WR802N/WR810N to work with a DSL modem (Dynamic IP-new logo)?
- Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)?
- How to configure TL-WR802N TL-WR810N working on WISP Client Router Mode
- How to configure TL-WR802N TL-WR810N working on Range Extender Mode
- How to configure TL-WR802N TL-WR810N working on Client Mode
- How to configure TL-WR802N TL-WR810N working on Router Mode
- How to configure TL-WR802N TL-WR810N working on AP Mode
- Why my TP-Link Router gets a WAN IP from the modem but no internet access？
- Why cannot I access the Internet after successfully connected to the TP-Link router's wireless network(MAC OS)?
- How to configure Address Reservation on TP-Link wireless router
- Application Requirement/Internet Access Control
- How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
- How do I install TP-Link wireless router to work with a Modem (Static IP)?
- Application Requirement/ Parental Control
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Hoe vind ik de hardware versie van een TP-Link product? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR802N(EU)_V3_160801 |
Download | |
|---|---|---|
| Publicatiedatum: 2016-08-01 | Taal: Engels | Bestandsgrootte: 3.81 MB |
|
Modifications and Bug Fixes: First Firmware Released. Notes: 1. For TL-WR802N(EU)_V3. |
||
Gebruik van Firmware van Derde Partijen in TP-Link Producten
Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen.
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
GPL Code
Emulatoren
Firmwareversie |
Working Mode |
Taal |
|
|---|---|---|---|
151231 |
- |
Engels |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.