How to install TP-Link ADSL router to work on Bridge mode
User Application Requirement
Updated 09-27-2019 07:46:57 AM
311837
311837 This Article Applies to:
Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter.
Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.
Step 3 Click Quick Setup on the left side
Step 4 Input the VPI and VCI into the box. The VPI and VCI are provided by your ISP, please contact with them to get the correct value. Then click on Next button.
Step 5 Select Bridging and then click on Next button.
Step 6 Click Next to complete the set up.
Step 7 Click Save/Reboot, your ADSL router will save the settings and will connect to Internet after reboot.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.