What is Local Smart Action?
11627 Enhancing Automation with Your Hub
Tapo H100/Kasa KH100 allows for a smooth transition of qualified Automations to Hub management, boosting response times and maintaining reliability, even with network variations or intermittent device disconnections.
How to make your Hub execute Automations
When creating or editing Automations, if the triggers and actions meet the following situations, your Hub will automatically take over the execution.
|
Triggers |
|
|
Motion Sensor |
Motion Detected |
|
No Motion Detected for a Set Time |
|
|
Contact Sensor |
Open |
|
Close |
|
|
Triggered |
|
|
Kept Open for 1 Min |
|
|
Kept Open for a Set Time |
|
|
Water Leak Sensor |
Water Leak Detected |
|
Water Leak Solved |
|
|
Temperature and Humidity Sensor |
Temperature above |
|
Temperature below |
|
|
Humidity above |
|
|
Humidity below |
|
|
Button |
Single Tap |
|
Double Tap |
|
|
Rotate Clockwise |
|
|
Rotate Counterclockwise |
|
|
Hub |
Ring |
|
Actions |
|
|
Lighting |
Turn On |
|
Turn Off |
|
|
Turn On/Off |
|
|
Turn on and customize lighting |
|
|
Remain on for a set time |
|
|
Brightness + |
|
|
Brightness - |
|
|
Color Temperature + |
|
|
Color Temperature - |
|
|
Random Color |
|
|
Plug, Switch
|
Turn On |
|
Turn Off |
|
|
Turn On/Off |
|
|
Remain on for a set time |
|
Notes:
- Ensure that your Hub is updated to the latest firmware version.
- Once the Hub takes over the execution of Automations, your Automation will be marked with a symbol (
for Kasa / 
for Tapo) for easy identification - Custom settings are currently not available. If the conditions are not met after modification, it will no longer be executed by the Hub.
-
The progress of compatibility with Local Smart varies for different device models and hardware/firmware versions, as well as its supported skills. For specific compatibility updates, please follow the product firmware updates.
Important Notices:
- Automations taken over by the Hub can continue to execute reliably during network fluctuations or temporary device disconnections. However, they cannot fully replace cloud-based Automations that require internet access. Therefore, it is not recommended to rely solely on Hub-executed Automations in offline situations.
- Once an Automation is assumed by the Hub, you will not be able to edit or delete it if the Hub is disconnected from both the network and the cloud. However, you can resume editing the Automation once the hub is back online.
- If the Hub powers off, Automations taken over by the Hub cannot be executed. After the Hub restores power, certain Automations with Effect Time or Time Trigger settings will require the Hub to reconnect to the network and accurately synchronize the time before they can execute properly.
- If your home router has network segmentation or disabled device-to-device communication settings, Automations will not be taken over and executed by the Hub.
- Ensure that your Hub is updated to the latest firmware version.
Is this faq useful?
Your feedback helps improve this site.
