Download for AC50
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
AC50 Wireless ControllerDatabase
|
AC_1.0.6_Database |
Download | |
|---|---|---|
| Published Date: 2017-05-10 | Language: English | File Size: 279.85KB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes:
|
||
FAQs
- How to Set Up a Wireless Network Using TP-Link AC/CAP Serial Products
- How to Configure MAC Authentication Function on TP-LINK CAP/AC Serial Products
- How to Configure Load Balance Function on TP-Link CAP/AC Serial Products
- How to Configure Band Steering Function on TP-Link CAP/AC Serial Products
- How to Configure Dual-link Backup Function on TP-Link CAP/AC Serial Products
- How to Upgrade the CAPs Using the TP-LINK AC Controller
- How to Upgrade the AP Database for TP-LINK AC Controller
- How to configure Onekey Online authentication on TP-Link CAP/AC serial product
- How to Configure Web Authentication (Local Authentication Server & Local Web Server) on TP-Link CAP/AC Serial Products
- How to Configure Web Authentication (Remote Authentication Server & Local Web Server) on TP-Link CAP/AC Serial Products
- How to Manage CAPs in Different subnets Using TP-Link AC Controller (Using TP-Link AC Controller as the DHCP Server for the CAPs)
- How to Manage CAPs at Different Sites across Internet Using TP-LINK AC Controller (with VPN Tunnel)
- How to Manage CAPs at Different Sites across the Internet Using TP-LINK AC Controller (with NAT Port Forwarding)
- How to Manage CAPs in Different VLANs Using TP-Link AC controller
- How to Configure Remote Portal Authentication (Remote Web Server & Local Authentication Server) on TP-Link CAP/AC Serial Products
- How to Configure Remote Portal Authentication (Remote Web Server & Remote Authentication Server) on TP-Link CAP/AC Serial Products
- How to Manage CAPs in Different Subnets Using TP-Link AC Controller (Using L3 Switch as the DHCP Server for the CAPs)
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
AC50(UN)_V1_180524 |
Download | |
|---|---|---|
| Published Date: 2019-02-13 | Language: English | File Size: 8.81 MB |
|
Modifications and Bug Fixes: |
||
|
AC50(UN)_v1_171129 |
Download | |
|---|---|---|
| Published Date: 2018-02-09 | Language: English | File Size: 8.81 MB |
|
Modifications and Bug Fixes: Note: 2. When you see the SYS LED is flashing slowly and the web page becomes stuck during the upgrading, please allow a few minutes for the firmware to upgrade on your AC50 and DO NOT cut off the power. Otherwise, the device might be damaged. |
||
|
AC50(UN)_V1_170706 |
Download | |
|---|---|---|
| Published Date: 2017-07-06 | Language: English | File Size: 8.81 MB |
|
Modifications and Bug Fixes: New Features/Enhancement: Notes: 1. For AC50(UN)_v1. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
171218 |
- |
English |
|
161027 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.