LS109P
9-Port 10/100Mbps Desktop Switch with 8-Port PoE+
- 63 W PoE Budget: Eight 10/100 Mbps 802.3af/at-compliant PoE ports easily connect and power fixed devices like IP cameras, access points, and IP phones via a single cable. Up to 30 W PoE output is supported by each PoE port.*
- Up to 250 m PoE Transmission: With Extend Mode, PoE transmission distance reaches up to 250m, perfect for surveillance camera deployment in large areas.**
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices.
- Traffic Separation for Higher Security: Isolation Mode allows one-click client traffic separation to avoid snooping and tampering, and isolate broadcast storms.
- Plug and Play: Simply plug and play for instant connectivity with no configuration required.
- Silent Operation: Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses.
- Reliable Hardware Design: Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
Easily Expend Your
Network
and Save Energy
9-Port 10/100Mbps Desktop Switch
with 8-Port PoE+
LS109P
Power over Ethernet, Flexible Network Deployment
Compliant with the 802.3af/at PoE+ standard, 63 W available for all PoE+ Ports, 30 W max per Port*
8 PoE+ Ports
IP Camera
IP Phone
Access Point
Network Video Recorder
Data
Power & Data
Ideal for IP Surveillance
—Up to 250 m Transmissions
Extend Mode Button
LS109P ( Extend Mode On )
LS109P ( Extend Mode Off )
Port 1-4/1-8
Up to 250 m**
100 m
Toggle for Network Security and Stability
-
Isolation Mode Button
Isolation Mode
Easily divide traffic to avoid snooping/tampering and broadcast storm.
-
Recovery Mode Button
IP Camera
IP Camera
PoE Auto Recovery
Automatically detect and reboot offline or unresponsive devices.
Plug and Play
-
1 Connect to Power
-
LS109P
Router
IP Phone
IP Camera
Access Point
Internet
2 Connect The Devices
-
3Enjoy
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | • 9× 10/100 Mbps RJ45 Ports (8× 10/100 Mbps 802.3af/at PoE+ Ports)• AUTO Negotiation• AUTO MDI/MDIX |
| Medios de Red | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m); EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m); EIA/TIA-568 100Ω STP (maximum 100m) |
| Cantidad de Ventiladores | Fanless |
| Instalación | • Desktop• Wall Mounting |
| Fuente de Alimentación | External Power Adapter (Output: 53.5VDC / 1.31A) |
| Puertos PoE (RJ45) | • Standard: 802.3 af/at compliant• PoE Ports: Ports 1–8, up to 30 W PoE output per port• Power Supply: 63 W |
| Indicador LED | • Power• Link/Act• PoE Status• PoE MAX |
| Dimensiones (W X D X H) | 6.7×3.9×1.1 in (171×98×27 mm) |
| Consumo Máximo de energía | • 3.67 W (220 V/50 Hz no PD connected)• 73.24 W (220 V/50 Hz with 63 W PD connected) |
| Disipación Máxima de Calor | • 12.48 BTU/h (220 V/50 Hz no PD connected) • 249 BTU/h (220 V/50 Hz with 63 W PD connected) |
| RENDIMIENTO | |
|---|---|
| Capacidad de Switcheo | 1.8 Gbps |
| Tasa de Reenvío de Paquetes | 1.3392 Mpps |
| Tabla de MAC Address | 2K |
| Jumbo Frame | 1.5 KB |
| CARACTERÍSTICAS DE SOFTWARE | |
|---|---|
| Características Avanzadas | • Extend Mode Button (Ports 1–4/1–8, Up to 250 m PoE power supply and data transmission)• Isolation Mode Button (Ports 1–8)• PoE Auto Recovery Button (Ports 1–8)• Compatible With IEEE 802.3af/at Compliant PDs• Mac Address Auto-Learning and Auto-Aging• IEEE 802.3x Flow Control• Green Technology |
| Método de Transferencia | Store and Forward |
| Otros | |
|---|---|
| Certificacion | CE, FCC, RoHS |
| Contenidos del Paquete | • LS109P• Power Adapter• Installation Guide• Rubber Feet |
| Ambiente | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to the power consumption of PoE-powered devices or the cable quality and type.