_1.0-B_normal_20230119085843v.PNG)
_1.0_normal_20230119085903h.png)
_1.0-B_thumb_20230119085843r.PNG)
_1.0_thumb_20230119085903a.png)
_1.0-B_large_20230119085843t.PNG)
_1.0_large_20230119085903e.png)
TL-SG116P
16-Port Gigabit Desktop Switch with 16-Port PoE+
- 16× 10/100/1000 Mbps RJ45 ports
- With 16 PoE+ ports, transfers data and power on one single cable
- Compliance with IEEE 802.3af/at PoE+, the switch supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 120 W for all PoE ports*
- Up to 250 m data and power transmission range under Extend Mode**
- Priority Mode ensures high priority of ports 1–4 to guarantee the quality of the sensitive applications
-
Isolation Mode allows one-click client traffic separation for higher security and performance
-
Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery
- Plug and play with no configuration required
Dedicated 16 PoE+ Ports (120 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 120 W PoE power budget* for the 16× PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Up to 30 W on Each Port
Total 120 W Power Budget
Plug and Play, No Configuration Required
-
1
Plug In
-
2
Connect Devices
Internet
IP Phone
IP Camera
Access Points
Router
TL-SG116P
-
3
Enjoy
Ideal for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10
Mbps. The actual transmission distance may vary due to power
consumption of PoE-powered devices or the cable quality and
type.
** In actual use, at least one port will be used to
connect to NVR or Router device.
Keep Your Network Smooth and Safe with Port Prioritization and Separation
-
Priority Mode
ButtonHigh
Low
Port Prioritization
Guarantees the quality of sensitive applications like video and voice in critical business areas by prioritizing the data of ports 1-4.
-
Isolation Mode
ButtonEnhanced with Port Isolation
Isolation Mode easily divides traffic for ports 1-7 or 8-14 to avoid snooping/tampering and isolates broadcast storm for higher security.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
120 W
Intelligent Power Management
When total power consumption exceeds 120 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | • 16× 10/100/1000Mbps RJ45 Ports• AUTO Negotiation• AUTO MDI/MDIX |
| Medios de Red | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Cantidad de Ventiladores | Fanless |
| Fuente de Alimentación Externa | External Power Adapter (Output: 53.5 VDC / 2.43 A) |
| Tasa de Reenvío de Paquete | 23.8 Mpps |
| Puertos PoE (RJ45) | • Standard: 802.3 af/at compliant• PoE Ports: Ports 1–16• Power Supply: 120 W |
| Tabla de Dirección Mac | 8K, Auto-learning, Auto-aging |
| Capacidad de Switcheo | 32 Gbps |
| Dimensiones (W X D X H) | 11.3 × 4.4 × 1.0 in (286 × 111.7 × 25.4 mm) |
| Consumo Máximo de energía | • 11.72 W (220 V / 50 Hz no PD connected) /11.56 W (110 V / 60 Hz no PD connected)• 142.51 W (220 V / 50 Hz with 120 W* PD connected) / 144.28 W (110 V / 60 Hz with 120 W* PD connected) |
| Disipación Máxima de Calor | • 39.85 BTU/h (220 V / 50 Hz no PD connected) / 39.31 BTU/h (110 V / 60 Hz no PD connected)• 484.53 BTU/h (220 V / 50 Hz with 120 W* PD connected) / 490.55 BTU/h (110 V / 60 Hz with 120 W* PD connected) |
| CARACTERÍSTICAS DE SOFTWARE | |
|---|---|
| Características Avanzadas | • Compatible With IEEE 802.3af/at Compliant PDs• Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission)• Priority Mode Button (Ports 1–4)• Isolation Mode Button (Ports 1–7 / 8-14)• PoE Auto Recovery (Ports 1-16)• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping |
| Método de Transferencia | Store-And-Forward |
| Otros | |
|---|---|
| Certificacion | FCC, CE, RoHS |
| Contenidos del Paquete | • TL-SG116P• Power Adapter• Installation Guide |
| Ambiente | • Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.