Descarga para EAP330
- Product Overview
AC1900 Banda Dual Inalámbrica Gigabit con Punto de Acceso de Montaje en TechoOmada Discovery Utility
|
EAP Discovery_V1.0.3_Windows |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-08-11 | Idioma: Inglés | Tamaño del Archivo : 3.39 MB |
Sistema de Operación : WinXP/Vista/7/8/8.1/10/Server2008/Server2012 |
||
|
|
||
Setup Video
-
How to manage TP-Link EAPs centrally via the Software Controller
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
More Fold -
How to set up a TP Link EAP via your mobile phone
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via web browser
This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone
This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)
More Fold -
How to manage TP-Link EAPs centrally from a remote place via a web browser
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
More Fold -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
Preguntas Frecuentes
- Should I keep the Omada Controller running after configuration?
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- Common questions about TP-Link EAP device when it’s used in home network
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Frequently asked questions of EAP Series Access Points
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to configure Link Aggregation for EAP330
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- What if I forget the password of EAP Controller?
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
Una actualización de firmware puede resolver los problemas que pueda tener la versión anterior del firmware y mejorar su desempeño actual.
Actualizar
IMPORTANTE: Para evitar errores de actualización, por favor lea la siguiente información antes de continuar con el proceso de actualización.
- Por favor verifique la versión del hardware de su dispositivo para obtener la versión de firmware. Una actualización de firmware incorrecta podría dañar su dispositivo y anular la garantía. （Normalmente V1.x=V1）
- NO se recomienda actualizar el firmware que no es para su región. Dé clic aquí para seleccionar su propia región y descargar la versión del firmware más adecuada. ( ejemplo, el firmware de la EU y de USA son versiones diferentes del hardware)
- NO apague la unidad durante el proceso de actualización, ya que puede causar daños permanentes en el producto.
- NO actualice el firmware a través de una conexión inalámbrica a menos que el dispositivo de TP-Link sólo tenga conexión inalámbrica.
- Se recomienda que los usuarios detengan todas las aplicaciones de Internet en la computadora, o simplemente desconecten la línea de conexión a Internet desde el dispositivo antes de la actualización.
- Utilice el software de descompresión como WinZIP o WinRAR para extraer el archivo que descargue antes de la actualización.
|
EAP330(US)_V2_1.4.0 Build 20180925 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2018-10-16 | Idioma: Inglés | Tamaño del Archivo : 7.73 MB |
|
Recommended Controller Software Version: Omada Controller v 2.6.x or above
New Features/Improvements: 1. Support Omada APP management method. 2. Support HTTPS redirection of portal authentication page. 3. Support URL Free Authentication Policy 4. Support rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.) 5. Omada Controller increased the synchronization update process when the IP address of EAP is changed. 6. EAP will report Client RSSI information to Omada Controller. 7. The hardware version will be displayed as 1.0/2.0 in the management page.
Bug Fixed: 1. Fixed the bug that EAP will reboot automatically when Airtime Fairness function is enabled. 2. Fixed the bug that wireless clients may be displayed with abnormal IP address in Omada Controller. 3. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet. 4. Optimized the problem that EAP will be disconnected from Omada Controller.
Notes: 1. For EAP330 (US)_V2 only. 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP330(US)_V2_170930 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-09-30 | Idioma: Inglés | Tamaño del Archivo : 7.63 MB |
|
Recommended Controller Software Version: Omada Controller v 2.5.x New Features/Improvements: 1. Support new SMS, Facebook and other authentication methods of Omada Controller 2.5.x. 2. Voucher supports speed limit of clients. Bug Fixed: 1. Web management pages have syntax errors or inconsistent formats 2. EAP330 cannot be managed across different subnets when management VLAN is enabled. Notes: 1. For EAP330 (US) v2 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP330(US)_V2_170711 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-07-11 | Idioma: Inglés | Tamaño del Archivo : 7.60MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: Enhance the capability of anti-interference. Bug Fixed: Fix the bug that the Security Mode will turn to None if using a space character in the WPA/WPA2-PSK password. Notes: 1. For EAP330(US) v2. 2. Your device's configuration won't be lost after upgrading. |
||
|
EAP330(US)_V2_170515 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2017-05-15 | Idioma: Inglés | Tamaño del Archivo : 7.60 MB |
|
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: 1. Support SSH configuration through Omada Controller. 2. Enhance the stability. Notes: 1. For EAP330 (US)V2. 2. Your device's configuration won't be lost after upgrading. 3. Please do not use a space character in the WPA / WPA2-PSK password, otherwise a software problem may occur. |
||
|
EAP330(US)_V2_161107 |
Descargas | |
|---|---|---|
| Fecha de Publicación : 2016-11-07 | Idioma: Inglés | Tamaño del Archivo : 7.56MB |
|
Modifications and Bug Fixes: First Firmware Released For EAP330 V2 |
||
Usar Firmware de Terceros en los Productos de TP-Link
Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.
Abrir el Código Fuente Para Programadores (GPL)
La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.
Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.
Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.
Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.
Emulators
Versión de Firmware |
Modo de trabajo |
Idioma |
|
|---|---|---|---|
170930(EU) |
- |
Inglés |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.
Q&A
Feature Configuration Guide
- Quick Setup Guide for Standalone Omada EAPs
- Introduction of EAP Adoption
- Configuration Guide for Facebook Portal on Omada Controller 2.6.x
- How To Configure Cloud Access for Remote Management
- Methods for Managing the Omada EAPs Network
- Quick Start Guide_Standalone_EAP
- Managing System_Standalone EAP
- Managing EAP_Standalone EAP
- Configuring EAP_Standalone EAP
- Application Example_ Standalone EAP
- Configuration Guide for Facebook Portal on EAP Controller 2.5.x