Download for Archer BE800
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
Setup Video
FAQs
- How to share network on Tether App
- How to add a router to an EasyMesh network as a satellite device
- Brief introduction of Wireless Channel, Channel Width and DFS
- How to upgrade the firmware version of TP-Link EasyMesh satellite devices
- How to add the EasyMesh satellite devices via Tether App
- How to collect system log of Tether App
- General questions about VPN function on TP-Link Routers and Deco
- What should I do if the email shows that the link expired when I register cloud account or reset my password?
- How to use Iperf to test the speed on TP-Link routers
- Can TP-Link router be configured using screen reader and pure keyboard operation?
- Wi-Fi 7 FAQs
- How to install and activate Avira Prime after you subscribe Homeshield Total Security Package
- How to set the Surfshark WireGuard manually on TP-Link Wireless Router
- Can Deco Mesh, OneMesh, EasyMesh and Omada Mesh products work together?
- How to setup TP-Link Wi-Fi Router on web management page
- How to choose right TP-Link product for your internet service
- Should I use Dynamic IP or PPPoE？
- How to setup TP-Link Wi-Fi Router with Singtel on web management page
- How to setup TP-Link Wi-Fi Router with Singtel on Tether App
- How to set up IoT Network on TP-Link wireless router
- How to set up Access Control List in Access Point Mode on TP-Link wireless router
- How to retrieve your old router's PPPoE dial-up settings to TP-Link wireless router
- How to set up WireGuard VPN on TP-Link wireless router
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router
- How to connect TP-Link router with Starlink
- How to Create Static Routing on TP-Link Routers
- Troubleshooting: Unstable connection on the TP-Link router
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer BE800(US)_V1_1.1.5 Build 20240528 |
Download | |
|---|---|---|
| Published Date: 2024-06-17 | Language: Multi-language | File Size: 50.22 MB |
|
New Features/Enhancement: Bug fixes: |
||
|
Archer BE800(EU)_V1_1.1.3 Build 20240424 |
Download | |
|---|---|---|
| Published Date: 2024-06-05 | Language: Multi-language | File Size: 49.96 MB |
|
Note: |
||
|
Archer BE800(US)_V1_1.1.4 Build 240520 |
Download | |
|---|---|---|
| Published Date: 2024-05-31 | Language: Multi-language | File Size: 49.16 MB |
|
Note: Optimized wireless performance; Enhanced system stability. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
20190321 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.