What to do if my floodlight camera cannot power on
Tapo Others
Zaktualizowano w dniu 05-23-2024 02:48:18 AM
9732
9732 Ten artykuł dotyczy:
Please consult or have it performed by a licensed electrician.
- Make sure you have turned on the circuit breaker.
- Check that the bracket and camera are firmly attached.
- Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.
- Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.
- Reset the circuit breaker and verify wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult or have it performed by a licensed electrician.
Czy ten poradnik FAQ był pomocny?
Twoja opinia pozwoli nam udoskonalić tę stronę.
z United States?
Uzyskaj produkty, wydarzenia i usługi przeznaczone dla Twojego regionu.