Download para TL-SG2008
>Como identificar a versão de hardware num dispositivo TP-Link?
IMPORTANTE: A versão do modelo e de hardware varia de acordo com a região (EU/US). Consulte o site TP-Link da região correcta de acordo com a origem do produto.
MIBs Files
TP-Link_L2 Switch_MIB |
Descarregar | |
---|---|---|
Data de Publicação: 2024-02-29 | Idioma: Inglês | Tamanho: 199.18 KB |
Sistema operativo: Windows/Mac OS/Linux |
||
|
FAQs
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Voice VLAN on Omada Switches using Omada Controller
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure switch as DHCP server on Standalone mode
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure LACP on our Smart/ Managed Switch
- How to configure MAC ACL on Smart/Managed switch
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- What should I do if I cannot access the web management page of my TP-Link switch?
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?