What is the function we can configure when the switch is managed by Omada SDN Controller?

TP-Link New Safestream Router, Jetstream Switch, and Omada AP can be managed by Omada SDN Controller. For the Old Jetstream Switch, we have released the new firmware to fit for Omada SDN Controller. If you are using the old Jetstream Switch, you can download the new firmware from the TP-Link Office Website.

To work with Omada SDN Controller. Now Jetstream switch supports two different modes, one is the standalone mode, another is the controller mode. In the standalone mode, you can configure the full function of the switch. But in the controller mode, some advanced functions are limited.

We summarized these functions that can be configured in controller mode. You can find detailed information as below:

To help know clearly of the functions, we classify the functions as 5 types: System, Statistics, LAN Network, Network Security, and Services.

Module		Features	SDN Controller Mode	Standalone Mode
System	System Tool	System IP(Static/DHCP)	√	√
		Management VLAN	√	√
		LED on/off	√	√
		system Sunmmary	√	√
		Device Description	√	√
		System Time	√	√
		System Reboot	√	√
		System Reset	√	√
		Reboot Schedule	√	√
	Access	SSH	Switch supports SSH access in controller mode, but it only supports using the showing commends.	√
	POE	POE Protocol	IEEE802.3af/IEEE802.3at	IEEE802.3af/IEEE802.3at
		POE Power Budget	It supports checking but cannot change the value in SDN controller mode	√
		POE Port Config	In SDN controller mode, it names as "POE sechdule" feature. It supports setting time to enbale the POE function for the switch's port	√
	Time	Time Zone	SDN controller mode supports setting Time Zone for each site, which means different site can work in different Time Zone.	×
	Time	Time Range Config	√	√
L2 Features	Port	Port Status	√	√
		Port Speed and Duplex	√	√
		Port mirror Ingress(Many to One)	√	√
		Port mirror Egress(Many to One)	√	√
		Port Isolation	√	√
		Loopback Detection Port Based	√	√
	LAG	Sttaic LAG	Up to 8 Groups, up to 8 Ports per group	Up to 8 Groups, up to 8 Ports per group
	LAG	LACP(802.3ad)	Up to 8 Groups, up to 8 Ports per group	Up to 8 Groups, up to 8 Ports per group
	Traffic Monitor		√	√
	MAC address		Switch only supports learning the MAC address dynamicly in controller mode we cannot do any settings for the MAC address	In standalone mode, switch can dynamicly learn the MAC address. And it supports manually creating static Unicast address, Binding Dynamic address, creating filtering address and doing MAC notification settings.
	VLAN	802.1Q VLAN	4K VLANs 4K VIDs	4K VLANs 4K VIDs
	STP	STP(802.1d)	√	√
		RSTP(802.1w)	√	√
		MSTP(802.1s)	√	√
	Multicast	Max Multicast Groups	511 IPv4 multicast groups	511 IPv4, IPv6 shared multicast groups
	Multicast	IGMP Snooping	√	√
L3 Features	IP Interface	VLAN Interface	16 IPv4 Interface	16 IPv4/IPv6 Interface
		IPv4 Interface	√	√
		IP Address Mode(None/Static/DHCP/BOOTP)	√	√
		ADD/Delete Manually	√	√
		Interface Config(IP Address/Subnet Mask/VLAN/Interface Name)	√	√
	Routing	Static Routing	32 IPv4 Static Routes	32 IPv4/IPv6 Static Routes
		Static Routing Config	Destination/Subnet Mask/Next Hop/Distance	Destination/Subnet Mask/Next Hop/Distance
		Static Routing Table	√	√
	DHCP	DHCP Server	DHCP server IP Pool	DHCP server IP Pool DHCP server Manual Binding DHCP server Exluded IP Address
	DHCP	DHCP Relay	√	√
Security	QoS	Rate Limit(Ingress/Egress)	√	√
		Storm Control	Kbps Mdoe Broadcast Multicast Unknown Unicaste	Kbps/Ratio Mdoe Broadcast Multicast Unknown Unicaste
		Auto VOIP	It names as Voice Network in SDN controller mode. *In SDN controller mode, it only supports Auto VOIP feature, there doesn't have Voice VLAN feature.	Auto VOIP*In standalone mode, there also has the Voice VLAN feature which can use for the Voice application.
	ACL	ACL type	Switch supports combined ACL in controller mode, and it needs to cooperated with profile.	MAC ACL IP ACL Comnined ACL IPv6 ACL Packet Content ACL
	DHCP Filter	Type	DHCPv4 Filter	DHCPv4 Filter DHCPv6 Filter
	802.1X	Control Type	Port Based MAC Based	Port Based MAC Based
		Auth Method	PAP/EAP	PAP/EAP
		Radius Authentication	√	√
		Radius Accounting	√	√
Maintenance	SNMP	SNMP Version	V1/V2c/V3	V1/V2c/V3
		SNMP Group	√	√
		SNMP User	√	√
		SNMP Community	√	√
		Public MIBs	√	√
		Private MIBs	√	√
	LLDP	LLDP-MED	√	√
	System Monitor	CPU Monitor	It names as Statistics feature in SDN controller mode	√
	System Monitor	Memory Monitor	It names as Statistics feature in SDN controller mode	√
	Log	Display/Filtering	SDN Controller's Logs feature is powerful to maintain each SDN devices' logs.	√
		Severity Level		√
		Save to Flash		√
		Remote Host		√
		Backup Log		√

For the detailed setting description, please refer to the Omada SDN Controller user guide to see the Switch settings
.

What is the function we can configure when the switch is managed by Omada SDN Controller?

À procura de Mais

Produtos Recomendados