How to set up QoS for IGMP/IPTV in TD-8816/8817,TD-W8961ND/W8951ND/W8151N/W8901G/W8901N
63776 Please make sure Internet is OK first, and then configure QoS as below:
Suppose the topology is as below, please follow the steps to make IGMP/IPTV data have the highest priority for the whole network.
Configuration for QoS:
Step 1 Open your browser and enter 192.168.1.1 in your address bar, then press "Enter".
Step 2 Enter the username and password of your modem. By default it will be Username: "admin" and Password: "admin" or if you have changed this, please enter the new username and password.
Step 3 Click on "Advanced Setup" on the top menu and click on "QoS",
Set following parameters as below:
Note: If QoS is applied in some single computer, please set the source IP Address with Subnet Mask or Source MAC address in the rule.
At last click add button to finish adding the rule.
Now you can test IGMP QoS with the settings.
Note: For further information of the options, please refer User Guide coming with the product.
Este guia foi útil?
A sua resposta ajuda-nos a melhorar o nosso site.