5-Port Gigabit Desktop Switch with 4-Port PoE+
- 5× 10/100/1000 Mbps RJ45 ports
- With four PoE+ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 65 W for all PoE ports*
- Up to 250m data and power transmitting range under Extend Mode**
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Dedicated 4-Port PoE+ Switch (65 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 65 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Up to 30 W on Each Port
Total 65 W Power Budget
Plug and Play, No Configuration Required
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
Router
TL-SG1005P
-
Enjoy
Ideal for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
65 W
Intelligent Power Management
When total power consumption exceeds 65 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Advanced Functions for Higher Performance
-
IGMP
Snooping
Traffic Optimization
for IPTVIGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV.
-
QoS
For Fluent Online Experience
Ensures smooth traffic for latency sensitive applications, such as voice and video.
Studii de caz asemănătoare
-
TSUI WAH Restaurant
TP-Link ajută restaurantul TSUI WAH să ofere acoperire Wi-Fi în Hong Kong
TSUI WAH Restaurant
TP-Link ajută restaurantul TSUI WAH să ofere acoperire Wi-Fi în Hong Kong
„Soluția TP-Link oferă performanță Wi-Fi la un preț mult mai bun, care funcționează mult mai bine în bugetul nostru. TP-Link ne ajută să oferim Wi-Fi mult mai bun decât înainte. Acest lucru îmbunătățește în mod substanțial serviciile noastre și reputația noastră în rândul clienților. ” -Ben Leung, inginer IT al restaurantului.
| CARACTERISTICI HARDWARE | |
|---|---|
| Interfață | • 5× 10/100/1000Mbps RJ45 Ports• AUTO Negotiation• AUTO MDI/MDIX |
| Rețea media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Număr ventilatoare | Fanless |
| Alimentare Externă | External Power Adapter (Output: 53.5 VDC / 1.31 A) |
| Packet Forwarding Rate | 7.44 Mpps |
| Porturi (RJ45) PoE | • Standard: 802.3 af/at compliant• PoE Ports: Ports 1–4• Power Supply: 65 W |
| Tabelă de Adrese MAC | 2K |
| Jumbo Frame | 16 KB |
| Capacitate switching | 10 Gbps |
| Dimensiuni (L x l x H) | 3.9×3.9×1.0 in (99.8×98×25 mm) |
| Consum maxim | • 3.44 W (220/50 Hz. no PD connected)• 74.49 W (220/50 Hz. with 65 W PD connected) |
| Max Heat Dissipation | • 11.73 BTU/h (no PD connected)• 254.01 BTU/h (with 65 W PD connected) |
| Caracteristici Software | |
|---|---|
| Caracteristici Avansate | • Compatible With IEEE 802.3af/at Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping• Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)• PoE Auto Recovery (Ports 1-4) |
| Metodă de Transfer | Store-And-Forward |
| Altele | |
|---|---|
| Certificări | FCC, CE, RoHS |
| Conținut Pachet | • TL-SG1005P• Power Adapter• Installation Guide |
| Mediu | • Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables.