1.0_B_normal_20230614022508v.png)
1.0_Package_normal_20230614022521c.png)
1.0-315x240x70mm-M-7022509551_normal_20230614022611d.png)
1.0_B_thumb_20230614022508a.png)
1.0_Package_thumb_20230614022521m.png)
1.0-315x240x70mm-M-7022509551_thumb_20230614022611z.png)
1.0_B_large_20230614022508t.png)
1.0_Package_large_20230614022521a.png)
1.0-315x240x70mm-M-7022509551_large_20230614022611z.png)
TL-SG1006PP
6-Port Gigabit Desktop Switch with 3-Port PoE+ and 1-Port PoE++
- 6× 10/100/1000 Mbps RJ45 ports
- With one PoE++ port and three PoE+ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at/bt compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 30 W for each PoE+ port and 60W for PoE++ port
- Supports PoE Power up to 64 W for all PoE ports*
- Up to 250m data and power transmitting range under Extend Mode**
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Dedicated 1 PoE++ and 3 PoE+ Ports (64 W Budget) for Numerous Applications
Port 1 complies with the 802.3af/at/bt PoE++ to supply ample power up to 60 W, and ports 2-4 compliance with 802.3af/at PoE+ support up to 30 W on each PoE+ port. The total 64 W PoE power budget* for all PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
3 PoE+ Ports
Total 64 W Power Budget
Ideal for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Plug and Play, No Configuration Required
-
Plug In
-
Connect Devices
Internet
IP Phone
PIZ IP Camera
Access Point
Router
TL-SG1006PP
-
Enjoy
Power overload
64 W
Intelligent Power Management
When total power consumption exceeds 64 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
| CARACTERISTICI HARDWARE | |
|---|---|
| Interfață | • 6× 10/100/1000Mbps RJ45 Ports• AUTO Negotiation• AUTO MDI/MDIX |
| Rețea media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Număr ventilatoare | Fanless |
| Alimentare Externă | External Power Adapter (Output: 53.5 VDC / 1.31 A) |
| Packet Forwarding Rate | 8.928 Mpps |
| Porturi (RJ45) PoE | • Port 1 compliances with 802.3af/at/bt; Ports 2-4 compliance with 802.3af/at• Power Supply: 64 W |
| Tabelă de Adrese MAC | 4K |
| Capacitate switching | 12 Gbps |
| Dimensiuni (L x l x H) | 6.2x4.0x1.0 in (158x101x25 mm) |
| Consum maxim | • 4.75 W (220/50 Hz. no PD connected)• 71.46 W (220/50 Hz. with 64 W PD connected) |
| Max Heat Dissipation | • 16.20 BTU/h (220/50 Hz. no PD connected)• 243.68 BTU/h (220/50 Hz. with 64 W PD connected) |
| Caracteristici Software | |
|---|---|
| Caracteristici Avansate | • Compatible With IEEE 802.3af/at/bt Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping• Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)• PoE Auto Recovery (Ports 1-4) |
| Metodă de Transfer | Store-And-Forward |
| Altele | |
|---|---|
| Certificări | FCC, CE, RoHS |
| Conținut Pachet | • TL-SG1006PP• Power Adapter• Installation Guide |
| Mediu | • Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.