How to configure VIGI wireless Camera in VIGI App

VIGI C440-W , VIGI C540-W , VIGI C340-W
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Contents
Objective
This article provides a guide on how to configure a VIGI wireless camera using the VIGI app.
Requirements
- VIGI Wireless Camera
- VIGI App
Introduction
Before starting, ensure that the uninitialized wireless IP camera is connected to a power source. The camera can be added to the VIGI App by scanning the QR code and following the setup process below.
Configuration
Step 1. Open the VIGI App and log in with your TP-Link ID. If you do not have an account, sign up first.
Step 2. Tap the + button on the top right corner and scan the QR code on your camera.
Step 3. Power on the VIGI wireless camera, select wireless connection, and wait for about 45 seconds until the LED light flashes red and green. Click LED is flashing red and green and proceed to the next step.
Step 4. Enable location access on your phone. Go to your phone’s Wi-Fi settings and connect to the VIGI camera’s open network, VIGI_IPC_XXXX (XXXX is the last four digits of the VIGI camera’s MAC address). Wait for the VIGI App to detect the VIGI camera.
Step 5. Set a password to activate the device and enter your email address for password recovery. Select your time zone and name your VIGI camera.
Step 6. Scan the available 2.4 GHz Wi-Fi networks around. Select a network, enter the Wi-Fi password, and click Next. Make sure that the Wi-Fi password is entered correctly.
Step 7. After clicking Next, the camera will report “Connecting to Wi-Fi” and the LED light will blink green slowly. Wait for the camera to confirm “Wi-Fi connected” and the LED light will turn solid green.
Step 8. The camera will sound “deng-deng”, indicating that the setup has been completed.
Verification
Return to the device list in the VIGI App and you can see that the camera has been successfully added.
Conclusion
You have successfully configured your VIGI wireless camera using the VIGI App.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
A fost util acest FAQ?
Părerea ta ne ajută să îmbunătățim acest site.
Ce probleme ai avut cu acest articol?
- Nemulțumit de produs
- Prea complicat
- Titlu confuz
- Nu se aplică pentru mine
- Prea vag
- Alt motiv
Mulțumim
Apreciem părerea ta.
Acest site web folosește cookie-uri pentru a îmbunătăți experiența navigării web, a analiza activitățile online și a oferi utilizatorilor cea mai bună experiență pe site-ul nostru. Te poți opune utilizării cookie-urilor în orice moment. Poți afla mai multe informații în politica de confidențialitate .
Acest site web folosește cookie-uri pentru a îmbunătăți experiența navigării web, a analiza activitățile online și a oferi utilizatorilor cea mai bună experiență pe site-ul nostru. Te poți opune utilizării cookie-urilor în orice moment. Poți afla mai multe informații în politica de confidențialitate .
Cookie-uri de bază
Aceste cookie-uri sunt necesare pentru funcționarea site-ului web și nu pot fi dezactivate în sistemele tale
TP-Link
SESSION, JSESSIONID, accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Zendesk
OptanonConsent, __cf_bm, __cfruid, _cfuvid, _help_center_session, _pendo___sg__.<container-id>, _pendo_meta.<container-id>, _pendo_visitorId.<container-id>, _zendesk_authenticated, _zendesk_cookie, _zendesk_session, _zendesk_shared_session, ajs_anonymous_id, cf_clearance
Cookie-uri de analiză și marketing
Cookie-urile de analiză ne permit să analizăm activitățile tale de pe site-ul nostru web a îmbunătăți și ajusta funcționalitatea site-ului.
Cookie-urile de marketing pot fi setate prin intermediul site-ului nostru web de către partenerii noștri publicitari pentru a crea un profilul intereselor tale și a-ți afișeze reclame relevante pe alte site-uri web.
Google Analytics, Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads și DoubleClick
test_cookie, _gcl_au