How to configure VIGI wireless Camera in VIGI App

When You Set Up
Дата последнего обновления: 09-12-2024 08:47:30 AM 2867
Эта статья подходит для: 

Contents

Objective

Requirements

Introduction

Configuration

Verification

Conclusion

Objective

This article provides a guide on how to configure a VIGI wireless camera using the VIGI app.

Requirements

  • VIGI Wireless Camera
  • VIGI App

Introduction

Before starting, ensure that the uninitialized wireless IP camera is connected to a power source. The camera can be added to the VIGI App by scanning the QR code and following the setup process below.

Configuration

Step 1. Open the VIGI App and log in with your TP-Link ID. If you do not have an account, sign up first.

The login page of the VIGI APP.The login page of the VIGI APP.

Step 2. Tap the + button on the top right corner and scan the QR code on your camera.

The location of the Add button in the VIGI APP.The location of the Add button in the VIGI APP.

Step 3. Power on the VIGI wireless camera, select wireless connection, and wait for about 45 seconds until the LED light flashes red and green. Click LED is flashing red and green and proceed to the next step.

The setting page of the connection type in VIGI APP.The setting page of the connection type in VIGI APP.

Step 4. Enable location access on your phone. Go to your phone’s Wi-Fi settings and connect to the VIGI camera’s open network, VIGI_IPC_XXXX (XXXX is the last four digits of the VIGI camera’s MAC address). Wait for the VIGI App to detect the VIGI camera.

The device searching page in the VIGI APP.The device searching page in the VIGI APP.The device searching page in the VIGI APP.

Step 5. Set a password to activate the device and enter your email address for password recovery. Select your time zone and name your VIGI camera.

The initialization page of the VIGI camera in VIGI APP.The initialization page of the VIGI camera in VIGI APP.The initialization page of the VIGI camera in VIGI APP.

Step 6. Scan the available 2.4 GHz Wi-Fi networks around. Select a network, enter the Wi-Fi password, and click Next. Make sure that the Wi-Fi password is entered correctly.

The Wi-Fi setting page in the VIGI APP.The Wi-Fi setting page in the VIGI APP.The Wi-Fi setting page in the VIGI APP.

Step 7. After clicking Next, the camera will report “Connecting to Wi-Fi” and the LED light will blink green slowly. Wait for the camera to confirm “Wi-Fi connected” and the LED light will turn solid green.

The connecting page in the VIGI APP.The connecting page in the VIGI APP.

Step 8. The camera will sound “deng-deng”, indicating that the setup has been completed.

The success page in the VIGI APP.

Verification

Return to the device list in the VIGI App and you can see that the camera has been successfully added.

The device list in the VIGI APP.

Conclusion

You have successfully configured your VIGI wireless camera using the VIGI App.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Был ли этот FAQ полезен?

Ваш отзыв поможет нам улучшить работу сайта.

Рекомендуемая продукция

Community

Сообщество TP-Link

Нужна помощь? Задавайте вопросы, находите ответы и обращайтесь за помощью к специалистам TP-Link и другим пользователям со всего мира.

Посетить сообщество >

From United States?

Get products, events and services for your region.