How to set up Address Reservation for clients on Omada Gateway in Standalone webpage

Configuration Guide
Дата последнего обновления: 10-30-2024 02:40:41 AM 2343
Эта статья подходит для: 

Contents

Objective

Requirements

Introduction

Configuration

Conclusion

Objective

In this article, we will share how to set up DHCP reservations, i.e., assign static IP addresses to printers, file servers, IP cameras, and other clients in Standalone mode.

Requirements

  • Omada Gateway series

Introduction

DHCP reservation is a permanent IP address assignment. A specific IP address within a DHCP scope is permanently reserved for leased use to a specific DHCP client.

Users can configure a DHCP reservation in their DHCP server when they need to reserve a permanent IP address assignment. Reservations are used for DHCP-enabled devices like printers and file servers or other application servers that always have a fixed IP address on the network.

Configuration

1. Log in to Controller, go to Network>LAN>Address Reservation. Click on the Add button. Fill in the correct MAC address of the client and the IP address you want to use. Then click OK to save the settings.

The position to fill in Address Reservation needs to configure MAC Address and IP Address.

2. You can also add address reservation entries in bulk by importing Excel tables in the specified format. Click Export to get the template, fill in your address reservation information to the template, and click Import to import the Excel file to complete the addition of the address reservation.

The position to export and import an Excel file to complete the addition of the address reservation.

3. You can also view the Clients that have acquired leases in the DHCP Client List and click the Reserve button to add them as reserved IPs.

The position of DHCP Client List to add reserved IP.

After adding an entry, you can modify or delete the entry's MAC, IP, and description in Address Reservation.

The position to modify or delete the entry's MAC, IP, and description.

Note:

1. Omada Gateway should act as the DHCP server.

2. The reserved IP addresses can be set out of the DHCP range but should be in the same subnet with the interface.

3. If assigning a different IP address from the current one, please re-plug the Ethernet cable for wired clients, re-enable Wi-Fi for wireless clients, or reboot the IoT clients to update.

4. To prevent ARP spoofing attacks, it is recommended that you check the Export to IP-MAC Binding box.

Conclusion

You have now successfully configured the address reservation on the Omada Gateway.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Похожие статьи

Был ли этот FAQ полезен?

Ваш отзыв поможет нам улучшить работу сайта.

Рекомендуемая продукция

Community

Сообщество TP-Link

Нужна помощь? Задавайте вопросы, находите ответы и обращайтесь за помощью к специалистам TP-Link и другим пользователям со всего мира.

Посетить сообщество >

From United States?

Get products, events and services for your region.