Download for RE200 V1

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

RE200(EU)_V1_Datasheet

Manual

RE200

Setup Video

Vanliga frågor

What should I do if the email shows that the link expired when I register cloud account or reset my password? 08-02-202414235
General questions about EasyMesh 06-29-2024147359
What If I fail to establish EasyMesh network using TP-Link EasyMesh devices? 03-12-202419304
Why is my TP-Link Range Extender not getting the same speed as the main router? 01-12-202425595
How to set up Mac Filtering on router (blue UI) to control the devices connected to the range extender 10-24-2023159148
Varför får jag varningar om svag säkerhet på min apple enhet? 02-11-2021440666
Unable to See the Wi-Fi Name or SSID of the TP-Link Range Extender After Configuration 06-20-202395059
What should I do if I fails to login web interface of TP-Link Range Extender? 04-07-2023375319
What should I do if I fail to configure TP-Link Range Extender? 02-20-2023534292
TP-Link Range Extender Stops Working 02-16-2023190764
Vad kan jag göra om min range extender inte hittar något nätverk att ansluta? (SE) 02-03-2021241866
Fix Unstable Connection on the Range Extender by Changing Router Advanced Features 01-05-2023144984
Why I cannot access range extender by using the domain name? 06-29-2022242172
How to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage 06-28-2022727128
How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage 06-28-20225526436
How to set up Mac Filtering on router to control the devices connected to the Range Extender(Green UI) 06-28-2022310900
How to log into the Web GUI of my Range Extender via IP address or domain name 06-28-20221617347
How to use my Range Extender properly if your range extender is configured correctly 06-28-2022171484
How to confirm whether my range extender is successfully configured and in the best location 06-27-2022451875
How to place your wireless Range Extender for optimal reception and performance 06-27-2022434862
Most frequently asked questions about TP-Link range extenders 06-10-2022645707
How to check whether my Range Extender is using the same SSID with my Router 12-02-2021613677
How to Boost Your Wi-Fi Signal 11-23-2021761085
What should I do if my range extender does not extend the Wi-Fi coverage? 09-15-2021130451
Varför kan inte min range extender ansluta sig till 5GHz bandet på min router? (SE) 02-02-2021793802
What's the solution if my TP-Link range extender can't connect to my router properly? 07-20-2021536419
My devices are connected to the range extender but no network access 07-20-2021582116
What are the most frequent asked questions about the RE200? 06-01-2021132350
How do I log into the Web-based Interface of Wireless Access Point or Extender(case 2)? 07-17-2020699269
Different Application Scenarios to use the TP-Link dual band range extender 02-06-2018192493
Why is my main router’s wireless password changed after using WPS to setup the Range Extender? 12-09-2014131922

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

RE200(EU)_V1_171206

Download

Published Date: 2018-02-09

Language: English

File Size: 4.65 MB

Bug fixes:
Fixed the WPA2 Security (KRACKs) Vulnerability.

Notes:
For RE200(EU)_V1

RE200(EU)_V1_170707

Download

Published Date: 2017-07-07

Language: English

File Size: 4.66 MB

Modifications and Bug Fixes:

1. Fix the compatibility problem with 5G signal of some routers.
2. Fix the transmitted power issue in specific condition.

Notes:

For RE200 EU 1.0

RE200(EU)_V1_160329

Download

Published Date: 2016-03-29

Language: English

File Size: 4.42 MB

Modifications and Bug Fixes:

New Features/Enhancement：
1. Now the RE LED will be solid on and won't go off in 2 minutes any more after the WPS connection is established successfully.
2. Improved the compatibility and stability of the device.

Bug Fixed：
1. When going though the Quick Setup process and choosing to set SSID and MAC manually, the configuration won't be saved if click Next and then click Back.
2. The device name identified by the root AP will not be RE200 after WPS connection is established.

Notes:

1.For RE200(EU)_V1.
2.The EU firmware was specialized for CE certificating and can’t be downgraded to other version, please click here for choosing your region and selecting the most suitable firmware version to upgrade.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

GPL_RE200_V1

Emulators

Firmware Version	Working Mode	Language
140828	-	English	Browse

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.