TL-SG105PP-M2
5-Port 2.5G Desktop Switch with 4-Port PoE++
- 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports
- With four PoE++ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at/bt type3 compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 60 W for each PoE++ port
- Supports PoE Power up to 123 W for all PoE ports*
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
5-Port 2.5G Desktop Switch with 4-Port PoE++
TL-SG105PP-M2
-
Five
2.5G Ports -
123W PoE
Budget* -
PoE Auto
Recovery -
Plug
and Play -
Multicast
Optimization -
QoS for Traffic
Prioritization -
Silent
Operation -
Durable Metal
Casing
2.5G Super-Fast Speeds without Changing Cables
This switch delivers 2.5 times faster network performance than traditional Gigabit switches. It works with CAT5e, CAT6, CAT6a and above cables without upgrading your cabling.
-
2.5 Gbps 2.5× Faster
-
1 Gbps
- CAT5e Cable
- CAT6 Cable
- CAT6a Cable
Unlock the Peak Performance of Devices with Multi-Gigabit PoE++ Ports
Featuring 5× 2.5 Gbps PoE++ ports, the switch supports a total PoE power budget of 123 W* with 60 W max per PoE++ port and is capable of future network expansion and deployment.
-
IP
Camera -
IP
Phone -
2.5G
WiFi6 AP -
2.5G Gaming
Computer -
2.5G
NAS/Server -
4k
Video
System Self-Healing with PoE Auto Recovery△
Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.
Plug and Play
-
1. Connect to Power
-
2. Connect the Devices
IP Phone
IP Camera
Access Point
Internet
Router
-
3. Enjoy
| HARDWARE FEATURES | |
|---|---|
| Interface | • 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports• AUTO Negotiation• AUTO MDI/MDIX |
| Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Fan Quantity | Fanless |
| External Power Supply | External Power Adapter (Output: 53.5 VDC / 2.43 A) |
| Packet Forwarding Rate | 18.6 Mpps |
| PoE Ports (RJ45) | • Standard: 802.3 af/at/bt type3 compliant• PoE++ Ports: Ports 1–4• Power Supply: 123 W |
| Mac Address Table | 4K |
| Switching Capacity | 25 Gbps |
| Dimensions ( W x D x H ) | 8.2×4.9×1.0 in (209×126×26 mm) |
| Max Power Consumption | • 7.57 W (220/50 Hz. no PD connected)• 143.37 W (220/50 Hz. with 123 W PD connected) |
| Max Heat Dissipation | • 25.81BTU/h (220 V/50 Hz with no PD connected) • 488.89 BTU/h (220 V/50 Hz with 123W PD connected) |
| SOFTWARE FEATURES | |
|---|---|
| Advanced Features | • Compatible With IEEE 802.3af/at/bt type3 Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping• PoE Auto Recovery (Ports 1-4) |
| Transfer Method | Store-And-Forward |
| OTHERS | |
|---|---|
| Certification | FCC, CE, RoHS |
| Package Contents | • TL-SG105PP-M2• Power Adapter• Installation Guide• Rubber Feet |
| Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.