Download for SG2005P-PD
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Manual
1_normal_20230821011545t.png)
Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ OutFAQs
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- Troubleshooting guide for TACACS+ Authentication Fails on Omada Switch
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- Troubleshooting for abnormal SNMP interactions on Omada switch
- How to configure Jumbo Frame on Omada Controller
- What should I do if I forget my Omada switch’s login username or password?
- Omada Switch DHCP Relay Configuration Guide
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure MVR on Omada Switches via Omada Controller
- How to configure MLD Snooping on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How do I know the type of my Omada switch?
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- What to do if Omada Device Adoption Failure
- Best practice to prevent network loops with Omada SDN solution
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.