Download for SG2210P
IMPORTANT:
Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Omada 10-Port Gigabit Smart Switch with 8-Port PoE+FAQs
- How do I know the type of my Omada switch?
- How to configure Voice VLAN on Omada Switches using Omada Controller
- Troubleshooting for Voice VLAN and Auto VoIP
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure LACP on our Smart/ Managed Switch
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Jumbo Frame on Omada Controller
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- Why my PoE powered device cannot work properly when connected to the PoE Switch？
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
- How to configure switch as DHCP server on Standalone mode
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- What is 2FA and how to use it in Omada platform
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to choose PoE switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.