Download for Archer AX80 V1

ข้อมูลสำคัญ: รุ่นสินค้าและเวอร์ชันฮาร์ดแวร์อาจแตกต่างกันไปตมแต่ละภูมิภาค โปรดตรวจสอบข้อมูลจากเว็บไซต์ TP-Link ของภูมิภาคของคุณเพื่อตรวจสอบความพร้อมของผลิตภัณฑ์.
ภาพรวมของผลิตภัณฑ์
คู่มือ

วิดีโอการตั้งค่า

  • How to Resolve Double NAT using Starlink

  • How to Configure a TP-Link Router with Starlink

คำถามที่พบบ่อย

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Archer AX80(US)_V1_1.1.2 Build 20240126

ดาวน์โหลด
วันที่เผยแพร่: 2024-03-07 ภาษา: หลายภาษา ขนาดไฟล์: 30.22 MB

Note:
Enhance system stability;
Optimized WAN connection stability.

Archer AX80(US)_V1_1.1.1 Build 20231201

ดาวน์โหลด
วันที่เผยแพร่: 2023-12-29 ภาษา: หลายภาษา ขนาดไฟล์: 30.22 MB

Note:
1. Optimized the L2TP/IPsec VPN performance;
2. Enhanced USB sharing performance;
3. Optimized system stability.

Archer AX80(US)_V1_1.1.0 Build 20230728

ดาวน์โหลด
วันที่เผยแพร่: 2023-09-05 ภาษา: หลายภาษา ขนาดไฟล์: 31.48 MB

This firmware contains important updates for HomeShield Pro, and we strongly recommend all HomeShield Pro users to upgrade to this firmware.
You will be unable to downgrade to the previous firmware version after updating this firmware.

Note:
1. Newly support EasyMesh with ethernet backhaul;
2. Newly support IoT Network function;
3. Newly support Device Isolation function;
4. Newly support WireGuard VPN function;
5. Newly support Flow Control function;
6. Enhanced system stability.

NOTE: 
To fully utilize all HomeShield Pro features, we recommend that you download and install the latest version of the Tether app on your mobile device.
For Android users: Recommended Tether version 4.1.23 or later
For iOS users: Recommended Tether version 4.1.11 or later

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

แอปฯ

TP-Link Tether

TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices

Note: To use Tether, please update your TP-Link device's firmware to the latest version.

อีมูเลเตอร์

เวอร์ชั่นเฟิร์มแวร์
โหมดการทำงาน
ภาษา
20221209(US)
-
ภาษาอังกฤษ

Note:

1.  The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3.  The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

จาก United States?

Get products, events and services for your region.