Download for RE450
วิดีโอการตั้งค่า
คำถามที่พบบ่อย
- How to collect system log of Tether App
- วิธีการเข้าหน้าตั้งค่าของ Access Point หรือ Extender (กรณีที่ 2)
- What should I do if the email shows that the link expired when I register cloud account or reset my password?
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- วิธีการตั้งค่า Range Extender ผ่าน Tether APP สำหรับใช้งานอุปกรณ์สมาร์ทโฮม
- How to configure my range extender via web GUI (new logo)
- ฉันจะปรับปรุงความเร็วหรือช่วงไร้สายได้อย่างไร
- จะทำอย่างไรถ้าClientไม่สามารถใช้งานไปมาระหว่างเราเตอร์ไร้สายกับผลิตภัณฑ์ TP-Link AP และ Range Extender
- General questions about EasyMesh
- How to log into the web management page of the range extender
- What If I fail to establish EasyMesh network using TP-Link EasyMesh devices?
- Why is my TP-Link Range Extender not getting the same speed as the main router?
- How to configure wireless network on the range extender (new logo)
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- Unable to See the Wi-Fi Name or SSID of the TP-Link Range Extender After Configuration
- หากไม่พบเครือข่ายโฮสต์เมื่อตั้งค่า TP-Link Range Extender
- ควรทำอย่างไรหากตั้งค่า TP-Link Range Extender ไม่สำเร็จ
- TP-Link Range Extender Stops Working
- Fix Unstable Connection on the Range Extender by Changing Router Advanced Features
- How to efficiently improve success rate of WPS
- How to check network status of the range extender (new logo)
- วิธีการตั้งค่า range extender ให้เป็น access point (โลโก้ใหม่)
- How to connect your wireless devices to the range extender via WPS as AP Mode (new logo)
- How to set access control on my range extender (new logo)
- How to upgrade the firmware of my range extender (new logo)
- How to adjust Wi-Fi coverage of TP-Link Range Extender (new logo)
- How to set up system time of Dual Band Range Extender (new logo)
- How to control LEDs of TP-Link Dual Band Range Extender (new logo)
- How to confirm whether my range extender is successfully configured and in the best location
- How to place your wireless Range Extender for optimal reception and performance
- Most frequently asked questions about TP-Link range extenders
- วิธีการตรวจสอบว่า Range Extender ใช้ SSID เดียวกันกับเราเตอร์ของฉันหรือไม่
- How to Boost Your Wi-Fi Signal
- What should I do if my range extender does not extend the Wi-Fi coverage?
- Why my Range Extender is unable to detect 5GHz wireless network of my root router?
- What's the solution if my TP-Link range extender can't connect to my router properly?
- My devices are connected to the range extender but no network access
- Different Application Scenarios to use the TP-Link dual band range extender
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
RE450(EU)_V3_181204 |
ดาวน์โหลด | |
|---|---|---|
| วันที่เผยแพร่: 2019-01-03 | ภาษา: หลายภาษา | ขนาดไฟล์: 7.84 MB |
|
Modifications and Bug Fixes: Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
แอปฯ
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
อีมูเลเตอร์
เวอร์ชั่นเฟิร์มแวร์ |
โหมดการทำงาน |
ภาษา |
|
|---|---|---|---|
190107(EU) |
- |
หลายภาษา |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.