Download for S5500-4XHPP2XF
- ภาพรวมของผลิตภัณฑ์
Omada Pro 4-Port PoE++ 10GE L2+ Managed Switch with 2 SFP+ Slotsคำถามที่พบบ่อย
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting Guide: Failing to detect OAM link fault
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- ความแตกต่างระหว่างบัญชี Master Administrator, Administrator และ Viewer ใน Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- 2FA คืออะไรและใช้งานอย่างไรในแพลตฟอร์ม Omada
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
S5500-4XHPP2XF(UN)_V1_1.0.1 Build 20231225 |
ดาวน์โหลด | |
|---|---|---|
| วันที่เผยแพร่: 2024-01-16 | ภาษา: ภาษาอังกฤษ | ขนาดไฟล์: 15.08 MB |
|
Bug Fixed: Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
แอปฯ
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.