Download for SG2210MP
- ภาพรวมของผลิตภัณฑ์
Omada 10-Port Gigabit Smart Switch with 8-Port PoE+Controller Software
|
Omada_SDN_Controller_v5.13.30.8_Windows |
ดาวน์โหลด | |
|---|---|---|
| วันที่เผยแพร่: 2024-02-05 | ภาษา: หลายภาษา | ขนาดไฟล์: 283.05 MB |
ระบบปฎิบัติการ: Windows 7/8/10/11/Server |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
วิดีโอการตั้งค่า
-
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
เพิ่มเติม พับเก็บ -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
เพิ่มเติม พับเก็บ -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
เพิ่มเติม พับเก็บ -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
เพิ่มเติม พับเก็บ -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
เพิ่มเติม พับเก็บ -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
เพิ่มเติม พับเก็บ -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
เพิ่มเติม พับเก็บ -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
เพิ่มเติม พับเก็บ
คำถามที่พบบ่อย
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- Troubleshooting for abnormal SNMP interactions on Omada switch
- How to configure Jumbo Frame on Omada Controller
- What should I do if I forget my Omada switch’s login username or password?
- Omada Switch DHCP Relay Configuration Guide
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure MVR on Omada Switches via Omada Controller
- How to configure MLD Snooping on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- ความแตกต่างระหว่างบัญชี Master Administrator, Administrator และ Viewer ใน Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How do I know the type of my Omada switch?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- What to do if Omada Device Adoption Failure
- Best practice to prevent network loops with Omada SDN solution
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above)
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- 2FA คืออะไรและใช้งานอย่างไรในแพลตฟอร์ม Omada
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
SG2210MP(UN)_V5_5.0.1 Build 20240418 |
ดาวน์โหลด | |
|---|---|---|
| วันที่เผยแพร่: 2024-09-12 | ภาษา: ภาษาอังกฤษ | ขนาดไฟล์: 9.34 MB |
|
New firmware released. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
แอปฯ
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.