Download for T1700X-16TS V3

โปรดเลือกเวอร์ชันฮาร์ดแวร์:

>จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร

ข้อมูลสำคัญ: รุ่นสินค้าและเวอร์ชันฮาร์ดแวร์อาจแตกต่างกันไปตมแต่ละภูมิภาค โปรดตรวจสอบข้อมูลจากเว็บไซต์ TP-Link ของภูมิภาคของคุณเพื่อตรวจสอบความพร้อมของผลิตภัณฑ์.

ภาพรวมของผลิตภัณฑ์

T1700X-16TS(UN)_V3_Datasheet

คู่มือ

ซอฟแวร์ลูกข่ายมาตรฐาน 802.1X

TP-LINK_802.1X_Client_Software

ดาวน์โหลด

วันที่เผยแพร่: 2017-09-05

ภาษา: ภาษาอังกฤษ

ขนาดไฟล์: 5.5MB

ระบบปฎิบัติการ: Win2000/XP/2003/Vista/7/8/8.1/10

คำถามที่พบบ่อย

How to configure LACP on our Smart/ Managed Switch 10-29-2024236544
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202482350
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024174878
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476239
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462797
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259072
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486280
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024146214
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024349733
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489529
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479256
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128623
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282877
How to configure 802.1q VLAN on Smart Switches 06-29-2022148434
How to limit the port rate of the incoming traffic via ACL function 06-28-202259417
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185628
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325810
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327273
How to configure MAC ACL on Smart/Managed switch 06-28-202285184
How to configure the DHCP Relay in TP-Link Switch 06-27-2022256765
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202262524
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290307
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159877
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860491
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133808
How to configure Extended IP ACL 04-28-201285624

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1700X-16TS(UN)_V3_20180524

ดาวน์โหลด

วันที่เผยแพร่: 2018-08-21

ภาษา: ภาษาอังกฤษ

ขนาดไฟล์: 13.72 MB

Modifications and Bug Fixes:

First firmware released.
Notes: For T1700X-16TS(UN) V3.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

อีมูเลเตอร์

เวอร์ชั่นเฟิร์มแวร์	โหมดการทำงาน	ภาษา
180827	-	ภาษาอังกฤษ	ค้นหา

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.