How to turn on or off the LEDs on devices using tpPLC Utility (new logo)
99293 Device LEDs help you to know the device working status. To turn on or off the LEDs on a device, follow the steps below( make sure your device is supported LED control ):
Please note: If the Utility hasn’t been installed yet, please refer to How to prepare for using the tpPLC Utility (new logo)?
1. Open the utility, move your mouse over a device, and click the 
(Basic) icon.
Note: Login is required at your first access to basic settings of a powerline extender. The login username and password (admin/admin by default) are the same as those of the web management interface.
2. Go to the LED page, and click the icon to turn on or off the LEDs.
Now the displayed LEDs as well as the actual product LEDs will become on or off correspondingly.
Note: Some powerline extenders support Wi-Fi Move. If such devices are on a powerline network that does not use the default name (HomePlugAV), changes made to the LED status of one device will be synchronized to other devices.
To turn on or off the LEDs on all the powerline devices in the current network, follow the steps below:
1. Open the utility, and click LED on the left column.
2. On the LED ON/OFF page, click the On or Off icon.
Now the displayed LEDs as well as the actual product LEDs will become on or off correspondingly.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
คำถามที่พบบ่อยนี้มีประโยชน์หรือไม่?
Your feedback helps improve this site.