için İndir EAP225
- Ürün Açıklama
- Kılavuz
-
- Indoor&Outdoor&Wall&Extender AP(EU1_12 Languages)
- Indoor&Outdoor&Wall&Extender AP(America_4 Languages)
- Indoor&Outdoor&Wall&Extender AP(Middle-East-Africa_2 Languages)
- Indoor&Outdoor&Wall&Extender AP(EU2_16 Languages)
- SSH Commands Guide for EAPs
- Ceiling Mount AP(EU1_12 Languages)_Installation Guide
- Ceiling Mount AP(America_4 Languages)_Installation Guide
- Ceiling Mount AP(Middle-East-Africa_2 Languages)_Installation Guide
- Ceiling Mount AP(EU2_16 Languages)_Installation Guide
- EAP(EU1-12Languages)_Installation Guide
- EAP Controller 2.5_User Guide
- EAP Controller_V2.4.8_User Guide
- EAP225(UN)_V2_Installlation Guide
- EAP225(UN)_V2_User Guide
Denetleyici Yazılımı
Omada_SDN_Controller_v5.14.26.1_linux_x64.deb |
İndir | |
---|---|---|
Yayın Tarihi: 2024-07-10 | Dil: Çoklu Dil | Dosya Boyutu: 217.79 MB |
İşletim Sistemi: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada Discovery Yardımcı Programı
EAP Discovery_V1.0.3_Windows |
İndir | |
---|---|---|
Yayın Tarihi: 2017-08-11 | Dil: İngilizce | Dosya Boyutu: 3.39 MB |
İşletim Sistemi: WinXP/Vista/7/8/8.1/10/Server2008/Server2012 |
||
|
Kurulum Videosu
-
How to mount the Passive PoE Adapter
This video will show you how to mount a Passive PoE Adapter, which may be sold separately or included in the package of an AP. Product appearance and accessories may vary by model.
Daha Fazla Dosya -
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Daha Fazla Dosya
SSS
- Instructions for SSID security settings on Omada Controller
- How to configure MAC-Based Authentication on Omada Controller
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- How do I configure 802.11 Rate Control on the Omada Controller
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure ACL on Omada AP via Omada Controller
- How to configure abnormal on Omada Pro Controller
- Understanding and implementing Minimum RSSI
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to use iPerf to test the speed between the EAP and the wireless client
- Common questions about TP-Link EAP device when it’s used in home network
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is Fast Roaming of TP-Link Business Wi-Fi Products?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Frequently asked questions of EAP Series Access Points
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
- How to Build a Mesh Network via Omada EAP in Controller Mode
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- Announcement on Discontinuation of Facebook Wi-Fi
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- EAP denetleyici 2.2.3 Giriş Kontrol Uygulama Örneği
- How to configure Management VLAN in Standalone mode for EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to Install TP-Link Omada Discovery Utility on Windows and macOS PCs
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- What if I forget the password of EAP Controller?
- How to configure the WLAN Group function on Omada Controller (V3 or below version)
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
Bir firmware güncellemesi, önceki firmware sürümünün sahip olabileceği sorunları çözer ve mevcut performansı artırır.
Güncelleme İçin
ÖNEMLİ: Güncelleme hatalarını önlemek için, güncelleme işlemine devam etmeden önce aşağıdakileri okuyunuz
- Cihaz yazılımı sürümü için, cihazınızın donanım sürümünü doğrulayın. Yazılımın yanlış güncellenmesi cihazınıza zarar verebilir ve garantiyi geçersiz kılabilir. (Normalde V1.x = V1)
Bölgeniz için olmayan bir firmware güncellemesi önerilmemektedir. Bölgenizi seçmek ve en uygun firmware sürümünü indirmek için lütfen burayı tıklayın. (Örneğin, AB'nin ve ABD'nin üretici yazılımı farklı donanım sürümleridir)
- Ürünü kalıcı bir hasara uğratmamak için güncelleme işlemi sırasında gücü KAPATMAYIN.
- Yazılımı kablosuz bağlantı yoluyla GÜNCELLEMEYİN.
- Kullanıcıların bilgisayardaki tüm Internet uygulamalarını durdurmaları veya güncellemeden önce Internet hattını cihazdan çıkarmanız önerilir.
- Güncellemeden önce indirdiğiniz dosyayı ayıklamak için WinZIP veya WinRAR gibi yazılımlar kullanın.
EAP225(EU)_V2_1.4.0 Build 180323 |
İndir | |
---|---|---|
Yayın Tarihi: 2018-04-13 | Dil: İngilizce | Dosya Boyutu: 8.12MB |
Recommended Controller Software Version: Omada Controller v 2.6.x or above
New Features/Improvements: 1. Support Omada APP management method. 2. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time. 3. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11. 4. Optimized Rouge AP detection process. 5. Web UI optimization. 6. The hardware version will be displayed as 1.0/2.0 in the management page.
Bug Fixed: 1. Fixed the incorrect IP address displaying of some clients in Omada Controller. 2. Fixed the bug that clients can use Facebook and Whatsapp APP before passing the portal authentication. 3. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in the clients list.
Notes: 1. For EAP225 (EU)_V2 only. 2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP. 3. Your device's configuration won't be lost after upgrading. |
EAP225(EU)_V2_180208 |
İndir | |
---|---|---|
Yayın Tarihi: 2018-02-24 | Dil: İngilizce | Dosya Boyutu: 7.96 MB |
Recommended Controller Software Version: Omada Controller v 2.6.x or above New Features/Improvements: 1. Supports HTTPS redirection of portal authentication page. 2. Facebook Portal now intercepts HTTPS access unless you pass the authentication 3. Omada Controller increased the synchronization update process when the IP address of EAP is changed. 4. EAP will report Client RSSI information to Omada Controller. 5. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured. 6. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.) 7. Restricts local resources access of wireless clients which did not pass the authentication. Bug Fixed: 1. The Controller now displays traffic statistics accurately. 2. Fixed the issue rate limit function may not work when Rate Limit value of Voucher is lower than 2 Kbps. 3. Fixed the issue SSID rate limit configuration may not take effect when wireless radio is turned off. 4. Fixed the system error caused by portal module after receiving some anomalous data packets. Notes: 1. For EAP225(EU)_V2 only. 2. Your device's configuration won't be lost after upgrading. |
EAP225(EU)_V2_170828 |
İndir | |
---|---|---|
Yayın Tarihi: 2017-08-28 | Dil: İngilizce | Dosya Boyutu: 7.90 MB |
Recommended Controller Software Version: Omada Controller v 2.5.x New Features/Improvements: 1. Support new SMS, Facebook and other authentication methods of EAP Controller v2.5.1. Notes: 1. For EAP225 V2. 2. Your device's configuration won't be lost after upgrade. |
EAP225(EU)_V2_170303 |
İndir | |
---|---|---|
Yayın Tarihi: 2017-03-03 | Dil: İngilizce | Dosya Boyutu: 7.87 MB |
Recommended Controller Software Version: Omada Controller v 2.4.x New Features/Improvements: |
TP-Link Ürünlerinde Üçüncü Şahıs Firmware Kullanmak İçin
TP-Link ürünlerinin bazı resmi firmware sürümleri, DD-WRT gibi üçüncü parti firmware sürümleri ile değiştirilebilir. TP-Link bu üçüncü parti firmware ile ilgili herhangi bir bakım veya destek sağlamakla yükümlü olmamakla birlikte bu tür yazılımların performansını ve kararlılığını garanti etmez. Üçüncü parti yazı kullanmanın sonucu olarak ürünün hasar görmesi, ürünün garantisini geçersiz kılacaktır.
Programcılar İçin Açık Kaynak Kodu (GPL)
Aşağıdaki bilgiler programcılar içindir ve çoğu TP-Link ev kullanıcısı için gereksizdir.
TP-Link'in ürünleri kısmen GNU Genel Kamu Lisansı ("GPL"), Version 1 / Version 2 / Version 3 veya GNU Lesser General Public License'a ("LGPL") tabi yazılım kodu da dahil olmak üzere, üçüncü şahıslar tarafından geliştirilen yazılım kodunu içerir. İlgili yazılım koşulunu GPL lisans koşullarını izlemek için kullanabilirsiniz.
İlgili GPL lisans koşullarını buradan inceleyebilir, yazdırabilir ve indirebilirsiniz. TP-Link ürünlerinde kullanılan ilgili yazılımın GPL kaynak kodlarını, GPL Kod Merkezi altında GPL yazılım kodunu içeren TP-Link yazılımının bir listesi de dahil olmak üzere, doğrudan indirmek ve daha fazla bilgi almak için alırsınız.
İlgili programlar herhangi bir garanti olmaksızın; hatta BELİRLİ BİR AMAÇ İÇİN UYGUNLUK VEYA PAZARLANABİLİR zımni garanti olmaksızın dağıtılır. Daha fazla ayrıntı için ilgili GNU Genel Kamu Lisansı'na bakınız.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.