Download for DS-P7001-16 V1

New Feature/Enhancement:
1. Setting Platform Integration. Application management that adapts to both AuthCode and Client modes.
2. Open API Auth. Provide three methods: Authentication Code, Client Admin, and Client View to authenticate and log in API users and control interface permissions.
3. DPMS Document. Support query documents for Device, L2 Feature, L3 Feature, Log, Monitor, Organization, PON, QoS, and Security module interfaces.
4. Open API. Support Open API interface calls for Device, L2 Feature, L3 Feature, Log, Monitor, Organization, PON, QoS, and Security module interfaces.

New Features/Enhancements:
1. 2.5G interface adaptation. Adapt ports for Eth port, MAC address, QOS BandWidthControl, Traffic, and PON functions.
2. PON Profile. Add ONU Remote Access function; Add ONU IGMP Proxy function; Add Service Port Profile function.
3. PON ONU Management. Add information of ONU MAC Address, Deactivate Reason, and Distance in ONU DetaiIed Info --> ONU Basic lnformation menu; Add ONU Remote Access function; Add ONU IGMP Proxy function; ONU Information menu supports batch reset of ONU devices.
4. PON ONU Register. Add Service Port Profile configuration registration for Autofind, Authentication, and Auto Authentication.
5. Device menu optimization for reading ONU information.
6. Maintenance System Log and Logs. Support ONU online/offline event record.

New Features:
1.L2 Function
Eth port and MAC address modules are compatible with 40G ports and XGSPON ports.
2.QoS Function
The Class of Service DSCP module adjusts the Remap function; 
BandWidthControl module is compatible with 40G ports and XGSPON ports, with the addition of dynamic upper limit prompts;
Traffic Profile and Traffic Monitor functions are compatible with 40G ports and XGSPON ports.
3.PON Function
ONU Information is adapted for XGS devices' Vlan Isolation function; 
Service Port module is compatible with 40G ports and XGSPON ports.
4.Security Function
Security ACL module is adapted for XSG devices.
5.System Function
System tools optimize OLT configuration import/export file size limits; 
System Info adjusts Port Status; 
DDM module is adapted for XGS Tx Power upper limit.
6.Maintainance Function
Device interface optimizes XGS-connected ONU device information retrieval;
Maintenance System Log and Logs are adapted for XGS devices, recognizing Onu Online events.

New features/Enhancement:
(1) Adapting omada, support using Omada to control and manage OLTs;
(2) When acting as a DHCP client, the device supports to parse option 43 and 138 through the reply of DHCP server and obtain the network address where the centralized management system is located;
(3) Support obtaining address for VLAN 1 interface through DHCP and fallback to default IP address when DHCP failed;
(4) Add support for service port profile feature;
(5) Add support for IGMP Proxy option when configuring ONT WAN Connection;
(6) Add support for ONT Remote Access;
(7) Add support for ONT Reset feature;
(8) Add support for viewing MAC address of ONT;
(9) Add support for viewing ONT last down cause;
(10) Add support for viewing board temperature through SNMP;
(11) Add support for setting subnet mask to 31 digits, supporting subnet mask like 255.255.255.254;
(12) Add support for obtaining MAC ONU ID through SNMP, adding ONU ID and GEM ID attribute in dynamic MAC table;
(13) Add support for DS-PMA-C++ SFP optical modules;
(14) Add support for querying traffic based on PON ports through SNMP;
(15) Add support for diagnosis of management port on OLT (CLI configuration supported only)
(16) Add support for redirecting Logs of PON ports and exporting via tftp under diagnostic mode.