1.3.6.1.2.1.1

System group. The system group includes information about the system on which the entity resides. Object in this group are useful for fault management and configuration management.

1.3.6.1.2.1.1.1

Read-Only

DisplayString

A textual description of the entity.

1.3.6.1.2.1.1.2

Read-Only

Object Identifier

The vendor’s authoritative identification of the network management subsystem contained in the entity.

1.3.6.1.2.1.1.3

Read-Only

TimeTicks

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

1.3.6.1.2.1.1.4

Read-Write

DisplayString

The textual identification of the contact person for this managed node, together with information on how to contact this person.

1.3.6.1.2.1.1.5

Read-Write

DisplayString

An administratively-assigned name for this managed node. By convention, this is the node’s fully-qualified domain name.

1.3.6.1.2.1.1.6

Read-Write

DisplayString

The physical location of this node.

1.3.6.1.2.1.1.7

Read-Only

Integer

A value which indicates the set of services that this entity primarily offers.

1.3.6.1.2.1.2

Interfaces group. The interfaces object group contains information about each interface on a network device. This group provides useful information on fault management, configuration management, performance management and accounting management.

1.3.6.1.2.1.2.1

Read-Only

Integer

The number of network interfaces present on this system.

1.3.6.1.2.1.2.2

Not-Accessible

Sequence of IfEntry

A list of interface entries.

1.3.6.1.2.1.2.2.1

Not-Accessible

IfEntry

An interface entry containing objects at the subnetwork layer and below for a particular interface.

1.3.6.1.2.1.2.2.1.1

Read-Only

Integer

A unique value for each interface.

1.3.6.1.2.1.2.2.1.2

Read-Only

DisplayString

A textual string containing information about the interface.

1.3.6.1.2.1.2.2.1.3

Read-Only

Integer

The type of interface, distinguished according to the physical/link protocol(s) immediately ‘below’ the network layer in the protocol stack.

1.3.6.1.2.1.2.2.1.4

Read-Only

Integer

The size of the largest datagram which can be sent/received on the interface, specified in octets.

1.3.6.1.2.1.2.2.1.5

Read-Only

Gauge

An estimate of the interface's current bandwidth in bits per second.

1.3.6.1.2.1.2.2.1.6

Read-Only

PhysAddress

The interface’s address at the protocol layer immediately 'below' the network layer in the protocol stack.

1.3.6.1.2.1.2.2.1.7

Read-Write

Integer

The desired state of the interface.

1.3.6.1.2.1.2.2.1.8

Read-Only

Integer

The current operational state of the interface.

1.3.6.1.2.1.2.2.1.9

Read-Only

TimeTicks

The value of sysUpTime at the time the interface entered its current operational state.

1.3.6.1.2.1.2.2.1.10

Read-Only

Counter

The total number of octets received on the interface, including framing characters.

1.3.6.1.2.1.2.2.1.11

Read-Only

Counter

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

1.3.6.1.2.1.2.2.1.12

Read-Only

Counter

The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

1.3.6.1.2.1.2.2.1.13

Read-Only

Counter

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

1.3.6.1.2.1.2.2.1.14

Read-Only

Counter

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

1.3.6.1.2.1.2.2.1.15

Read-Only

Counter

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

1.3.6.1.2.1.2.2.1.16

Read-Only

Counter

The total number of octets transmitted out of the interface, including framing characters.

1.3.6.1.2.1.2.2.1.17

Read-Only

Counter

The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

1.3.6.1.2.1.2.2.1.18

Read-Only

Counter

The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

1.3.6.1.2.1.2.2.1.19

Read-Only

Counter

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.

1.3.6.1.2.1.2.2.1.20

Read-Only

Counter

The number of outbound packets that could not be transmitted because of errors.

1.3.6.1.2.1.2.2.1.21

Read-Only

Gauge

The length of the output packet queue (in packets).

1.3.6.1.2.1.2.2.1.22

Read-Only

Object Identifier

A reference to MIB definitions specific to the particular media being used to realize the interface.

1.3.6.1.2.1.4

1.3.6.1.2.1.4.1

Read-Write

Integer

The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host).

1.3.6.1.2.1.4.2

Read-Write

Integer

The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.

1.3.6.1.2.1.4.3

Read-Only

Counter

The total number of input datagrams received from interfaces, including those received in error.

1.3.6.1.2.1.4.4

Read-Only

Counter

The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.

1.3.6.1.2.1.4.5

Read-Only

Counter

The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.

1.3.6.1.2.1.4.6

Read-Only

Counter

The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination.

1.3.6.1.2.1.4.7

Read-Only

Counter

The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.

1.3.6.1.2.1.4.8

Read-Only

Counter

The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space).

1.3.6.1.2.1.4.9

Read-Only

Counter

The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).

1.3.6.1.2.1.4.10

Read-Only

Counter

The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission.

1.3.6.1.2.1.4.11

Read-Only

Counter

The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space).

1.3.6.1.2.1.4.12

Read-Only

Counter

The number of IP datagrams discarded because no route could be found to transmit them to their destination.

1.3.6.1.2.1.4.13

Read-Only

Integer

The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

1.3.6.1.2.1.4.14

Read-Only

Counter

The number of IP fragments received which needed to be reassembled at this entity.

1.3.6.1.2.1.4.15

Read-Only

Counter

The number of IP datagrams successfully re-assembled.

1.3.6.1.2.1.4.16

Read-Only

Counter

The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc).

1.3.6.1.2.1.4.17

Read-Only

Counter

The number of IP datagrams that have been successfully fragmented at this entity.

1.3.6.1.2.1.4.18

Read-Only

Counter

The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.

1.3.6.1.2.1.4.19

Read-Only

Counter

The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.

1.3.6.1.2.1.4.20

Not-Accessible

Sequence of IpAddrEntry

The table of addressing information relevant to this entity's IP addresses.

1.3.6.1.2.1.4.20.1

Not-Accessible

IpAddrEntry

The addressing information for one of this entity's IP addresses.

1.3.6.1.2.1.4.20.1.1

Read-Only

IpAddress

The IP address to which this entry's addressing information pertains.

1.3.6.1.2.1.4.20.1.2

Read-Only

Integer

The index value which uniquely identifies the interface to which this entry is applicable.

1.3.6.1.2.1.4.20.1.3

Read-Only

IpAddress

The subnet mask associated with the IP address of this entry.

1.3.6.1.2.1.4.20.1.4

Read-Only

Integer

The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry.

1.3.6.1.2.1.4.20.1.5

Read-Only

Integer

The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.

1.3.6.1.2.1.4.22

Not-Accessible

Sequence of IpNetToMediaEntry

The IP Address Translation table used for mapping from IP addresses to physical addresses.

1.3.6.1.2.1.4.22.1

Not-Accessible

IpNetToMediaEntry

Each entry contains one IpAddress to 'physical' address equivalence.

1.3.6.1.2.1.4.22.1.1

Read-Create

Integer

The interface on which this entry's equivalence is effective.

1.3.6.1.2.1.4.22.1.2

Read-Create

PhysAddress

The media-dependent 'physical' address.

1.3.6.1.2.1.4.22.1.3

Read-Create

IpAddress

The IpAddress corresponding to the media-dependent 'physical' address.

1.3.6.1.2.1.4.22.1.4

Read-Write

Integer

The type of mapping.

1.3.6.1.2.1.4.23

Read-Only

Counter

The number of routing entries which were chosen to be discarded even though they are valid.

1.3.6.1.2.1.5

1.3.6.1.2.1.5.1

Read-Only

Counter

The total number of ICMP messages which the entity received.

1.3.6.1.2.1.5.2

Read-Only

Counter

The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).

1.3.6.1.2.1.5.3

Read-Only

Counter

The number of ICMP Destination Unreachable messages received.

1.3.6.1.2.1.5.4

Read-Only

Counter

The number of ICMP Time Exceeded messages received.

1.3.6.1.2.1.5.5

Read-Only

Counter

The number of ICMP Parameter Problem messages received.

1.3.6.1.2.1.5.6

Read-Only

Counter

The number of ICMP Source Quench messages received.

1.3.6.1.2.1.5.7

Read-Only

Counter

The number of ICMP Redirect messages received.

1.3.6.1.2.1.5.8

Read-Only

Counter

The number of ICMP Echo (request) messages received.

1.3.6.1.2.1.5.9

Read-Only

Counter

The number of ICMP Echo Reply messages received.

1.3.6.1.2.1.5.10

Read-Only

Counter

The number of ICMP Timestamp (request) messages received.

1.3.6.1.2.1.5.11

Read-Only

Counter

The number of ICMP Timestamp Reply messages received.

1.3.6.1.2.1.5.12

Read-Only

Counter

The number of ICMP Address Mask Request messages received.

1.3.6.1.2.1.5.13

Read-Only

Counter

The number of ICMP Address Mask Reply messages received.

1.3.6.1.2.1.5.14

Read-Only

Counter

The total number of ICMP messages which this entity attempted to send.

1.3.6.1.2.1.5.15

Read-Only

Counter

The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.

1.3.6.1.2.1.5.16

Read-Only

Counter

The number of ICMP Destination Unreachable messages sent.

1.3.6.1.2.1.5.17

Read-Only

Counter

The number of ICMP Time Exceeded messages sent.

1.3.6.1.2.1.5.18

Read-Only

Counter

The number of ICMP Parameter Problem messages sent.

1.3.6.1.2.1.5.19

Read-Only

Counter

The number of ICMP Source Quench messages sent.

1.3.6.1.2.1.5.20

Read-Only

Counter

The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.

1.3.6.1.2.1.5.21

Read-Only

Counter

The number of ICMP Echo (request) messages sent.

1.3.6.1.2.1.5.22

Read-Only

Counter

The number of ICMP Echo Reply messages sent.

1.3.6.1.2.1.5.23

Read-Only

Counter

The number of ICMP Timestamp (request) messages sent.

1.3.6.1.2.1.5.24

Read-Only

Counter

The number of ICMP Timestamp Reply messages sent.

1.3.6.1.2.1.5.25

Read-Only

Counter

The number of ICMP Address Mask Request messages sent.

1.3.6.1.2.1.5.26

Read-Only

Counter

The number of ICMP Address Mask Reply messages sent.

1.3.6.1.2.1.6

1.3.6.1.2.1.6.1

Read-Only

Integer

The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.

1.3.6.1.2.1.6.2

Read-Only

Integer

The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds.

1.3.6.1.2.1.6.3

Read-Only

Integer

The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds.

1.3.6.1.2.1.6.4

Read-Only

Integer

The limit on the total number of TCP connections the entity can support.

1.3.6.1.2.1.6.5

Read-Only

Counter

The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.

1.3.6.1.2.1.6.6

Read-Only

Counter

The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

1.3.6.1.2.1.6.7

Read-Only

Counter

The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.

1.3.6.1.2.1.6.8

Read-Only

Counter

The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.

1.3.6.1.2.1.6.9

Read-Only

Gauge

The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.

1.3.6.1.2.1.6.10

Read-Only

Counter

The total number of segments received, including those received in error. This count includes segments received on currently established connections.

1.3.6.1.2.1.6.11

Read-Only

Counter

The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.

1.3.6.1.2.1.6.12

Read-Only

Counter

The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.

1.3.6.1.2.1.6.13

Not-Accessible

Sequence of TcpConnEntry

A table containing TCP connection-specific information.

1.3.6.1.2.1.6.13.1

Not-Accessible

TcpConnEntry

Information about a particular current TCP connection.

1.3.6.1.2.1.6.13.1.1

Read-Write

Integer

The state of this TCP connection.

1.3.6.1.2.1.6.13.1.2

Read-Only

IpAddress

The local IP address for this TCP connection.

1.3.6.1.2.1.6.13.1.3

Read-Only

Integer

The local port number for this TCP connection.

1.3.6.1.2.1.6.13.1.4

Read-Only

IpAddress

The remote IP address for this TCP connection.

1.3.6.1.2.1.6.13.1.5

Read-Only

Integer

The remote port number for this TCP connection.

1.3.6.1.2.1.6.14

Read-Only

Counter

The total number of segments received in error.

1.3.6.1.2.1.6.15

Read-Only

Counter

The number of TCP segments sent containing the RST flag.

1.3.6.1.2.1.7

1.3.6.1.2.1.7.1

Read-Only

Counter

The total number of UDP datagrams delivered to UDP users.

1.3.6.1.2.1.7.2

Read-Only

Counter

The total number of received UDP datagrams for which there was no application at the destination port.

1.3.6.1.2.1.7.3

Read-Only

Counter

The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.

1.3.6.1.2.1.7.4

Read-Only

Counter

The total number of UDP datagrams sent from this entity.

1.3.6.1.2.1.7.5

Not-Accessible

Sequence of UdpEntry

A table containing UDP listener information.

1.3.6.1.2.1.7.5.1

Not-Accessible

UdpEntry

Information about a particular current UDP listener.

1.3.6.1.2.1.7.5.1.1

Read-Only

IpAddress

The local IP address for this UDP listener.

1.3.6.1.2.1.7.5.1.2

Read-Only

Integer

The local port number for this UDP listener.

1.3.6.1.2.1.16

Remote network monitoring.

1.3.6.1.2.1.16.1

The ethernet statistics group.

1.3.6.1.2.1.16.1.1

Not-Accessible

Sequence of EtherStatsEntry

A list of Ethernet statistics entries.

1.3.6.1.2.1.16.1.1.1

Not-Accessible

EtherStatsEntry

A collection of statistics kept for a particular Ethernet interface.

1.3.6.1.2.1.16.1.1.1.1

Read-Only

Integer32

The value of this object uniquely identifies this etherStats entry.

1.3.6.1.2.1.16.1.1.1.2

Read-Create

Object Identifier

This object identifies the source of the data that this etherStats entry is configured to analyze.

1.3.6.1.2.1.16.1.1.1.3

Read-Only

Counter32

The total number of events in which packets were dropped by the probe due to lack of resources.

1.3.6.1.2.1.16.1.1.1.4

Read-Only

Counter32

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.5

Read-Only

Counter32

The total number of packets (including bad packets, broadcast packets, and multicast packets) received.

1.3.6.1.2.1.16.1.1.1.6

Read-Only

Counter32

The total number of good packets received that were directed to the broadcast address.

1.3.6.1.2.1.16.1.1.1.7

Read-Only

Counter32

The total number of good packets received that were directed to a multicast address.

1.3.6.1.2.1.16.1.1.1.8

Read-Only

Counter32

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

1.3.6.1.2.1.16.1.1.1.9

Read-Only

Counter32

The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.

1.3.6.1.2.1.16.1.1.1.10

Read-Only

Counter32

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.

1.3.6.1.2.1.16.1.1.1.11

Read-Only

Counter32

The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

1.3.6.1.2.1.16.1.1.1.12

Read-Only

Counter32

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

1.3.6.1.2.1.16.1.1.1.13

Read-Only

Counter32

The best estimate of the total number of collisions on this Ethernet segment.

1.3.6.1.2.1.16.1.1.1.14

Read-Only

Counter32

The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.15

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.16

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.17

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.18

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.19

Read-Only

Counter32

The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.1.1.1.20

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

1.3.6.1.2.1.16.1.1.1.21

Read-Create

Integer

The status of this etherStats entry.

1.3.6.1.2.1.16.2

The history group.

1.3.6.1.2.1.16.2.1

Not-Accessible

Sequence of HistoryControlEntry

A list of history control entries.

1.3.6.1.2.1.16.2.1.1

Not-Accessible

HistoryControlEntry

A list of parameters that set up a periodic sampling of statistics.

1.3.6.1.2.1.16.2.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the historyControl table.

1.3.6.1.2.1.16.2.1.1.2

Read-Create

Object Identifier

This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry.

1.3.6.1.2.1.16.2.1.1.3

Read-Create

Integer32

The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry.

1.3.6.1.2.1.16.2.1.1.4

Read-Only

Integer32

The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry.

1.3.6.1.2.1.16.2.1.1.5

Read-Create

Integer32

The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour).

1.3.6.1.2.1.16.2.1.1.6

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

1.3.6.1.2.1.16.2.1.1.7

Read-Create

EntryStatus

The status of this historyControl entry.

1.3.6.1.2.1.16.2.2

Not-Accessible

Sequence of EtherHistoryEntry

A list of Ethernet history entries.

1.3.6.1.2.1.16.2.2.1

Not-Accessible

EtherHistoryEntry

An historical sample of Ethernet statistics on a particular Ethernet interface.

1.3.6.1.2.1.16.2.2.1.1

Read-Only

Integer32

The history of which this entry is a part.

1.3.6.1.2.1.16.2.2.1.2

Read-Only

Integer32

An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.

1.3.6.1.2.1.16.2.2.1.3

Read-Only

TimeTicks

The value of sysUpTime at the start of the interval over which this sample was measured.

1.3.6.1.2.1.16.2.2.1.5

Read-Only

Counter32

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

1.3.6.1.2.1.16.2.2.1.6

Read-Only

Counter32

The number of packets (including bad packets) received during this sampling interval.

1.3.6.1.2.1.16.2.2.1.7

Read-Only

Counter32

The number of good packets received during this sampling interval that were directed to the broadcast address.

1.3.6.1.2.1.16.2.2.1.8

Read-Only

Counter32

The number of good packets received during this sampling interval that were directed to a multicast address.

1.3.6.1.2.1.16.2.2.1.9

Read-Only

Counter32

The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

1.3.6.1.2.1.16.2.2.1.10

Read-Only

Counter32

The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.

1.3.6.1.2.1.16.2.2.1.11

Read-Only

Counter32

The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.

1.3.6.1.2.1.16.2.2.1.13

Read-Only

Counter32

The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

1.3.6.1.2.1.16.2.2.1.14

Read-Only

Counter32

The best estimate of the total number of collisions on this Ethernet segment during this sampling interval.

1.3.6.1.2.1.16.2.2.1.15

Read-Only

Counter32

The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.

1.3.6.1.2.1.16.3

The alarm group.

1.3.6.1.2.1.16.3.1

Not-Accessible

Sequence of AlarmEntry

A list of alarm entries.

1.3.6.1.2.1.16.3.1.1

Not-Accessible

AlarmEntry

A list of parameters that set up a periodic checking for alarm conditions.

1.3.6.1.2.1.16.3.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the alarm table.

1.3.6.1.2.1.16.3.1.1.2

Read-Create

Integer32

The interval in seconds over which the data is sampled and compared with the rising and falling thresholds.

1.3.6.1.2.1.16.3.1.1.3

Read-Create

Object Identifier

The object identifier of the particular variable to be sampled.

1.3.6.1.2.1.16.3.1.1.4

Read-Create

Integer

The method of sampling the selected variable and calculating the value to be compared against the thresholds.

1.3.6.1.2.1.16.3.1.1.5

Read-Only

Integer32

The value of the statistic during the last sampling period.

1.3.6.1.2.1.16.3.1.1.6

Read-Create

Integer

The alarm that may be sent when this entry is first set to valid.

1.3.6.1.2.1.16.3.1.1.7

Read-Create

Integer32

A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated.

1.3.6.1.2.1.16.3.1.1.8

Read-Create

Integer32

A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated.

1.3.6.1.2.1.16.3.1.1.9

Read-Create

Integer32

The index of the eventEntry that is used when a rising threshold is crossed.

1.3.6.1.2.1.16.3.1.1.10

Read-Create

Integer32

The index of the eventEntry that is used when a falling threshold is crossed.

1.3.6.1.2.1.16.3.1.1.11

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

1.3.6.1.2.1.16.3.1.1.12

Read-Create

Integer

The status of this alarm entry.

1.3.6.1.2.1.16.9

The event group.

1.3.6.1.2.1.16.9.1

Not-Accessible

Sequence of EventEntry

A list of events to be generated.

1.3.6.1.2.1.16.9.1.1

Not-Accessible

EventEntry

A set of parameters that describe an event to be generated when certain conditions are met.

1.3.6.1.2.1.16.9.1.1.1

Read-Only

Integer32

An index that uniquely identifies an entry in the event table.

1.3.6.1.2.1.16.9.1.1.2

Read-Create

DisplayString

A comment describing this event entry.

1.3.6.1.2.1.16.9.1.1.3

Read-Create

Integer

The type of notification that the probe will make about this event.

1.3.6.1.2.1.16.9.1.1.4

Read-Create

Octet String

If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.

1.3.6.1.2.1.16.9.1.1.5

Read-Only

TimeTicks

The value of sysUpTime at the time this event entry last generated an event.

1.3.6.1.2.1.16.9.1.1.6

Read-Create

OwnerString

The entity that configured this entry and is therefore using the resources assigned to it.

1.3.6.1.2.1.16.9.1.1.7

Read-Create

Integer

The status of this event entry.

1.3.6.1.2.1.16.9.2

Not-Accessible

Sequence of LogEntry

A list of events that have been logged.

1.3.6.1.2.1.16.9.2.1

Not-Accessible

LogEntry

A set of data describing an event that has been logged.

1.3.6.1.2.1.16.9.2.1.1

Read-Only

Integer32

The event entry that generated this log entry.

1.3.6.1.2.1.16.9.2.1.2

Read-Only

Integer32

An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries.

1.3.6.1.2.1.16.9.2.1.3

Read-Only

TimeTicks

The value of sysUpTime when this log entry was created.

1.3.6.1.2.1.16.9.2.1.4

Read-Only

DisplayString

An implementation dependent description of the event that activated this log entry.

1.3.6.1.2.1.17

Bridge objects.

1.3.6.1.2.1.17.1

"dot1dBase" group.

1.3.6.1.2.1.17.1.1

Read-Only

MacAddress

The MAC address used by this bridge when it must be referred to in a unique fashion.

1.3.6.1.2.1.17.1.2

Read-Only

Integer

The number of ports controlled by this bridging entity.

1.3.6.1.2.1.17.1.3

Read-Only

Integer

Indicates what type of bridging this bridge can perform.

1.3.6.1.2.1.17.1.4

Not-Accessible

Sequence of Dot1dBasePortEntry

A table that contains generic information about every port that is associated with this bridge.

1.3.6.1.2.1.17.1.4.1

Not-Accessible

Dot1dBasePortEntry

A list of information for each port of the bridge.

1.3.6.1.2.1.17.1.4.1.1

Read-Only

Integer

The port number of the port for which this entry contains bridge management information.

1.3.6.1.2.1.17.1.4.1.2

Read-Only

Integer

The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.

1.3.6.1.2.1.17.1.4.1.3

Read-Only

Object Identifier

For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port.

1.3.6.1.2.1.17.1.4.1.4

Read-Only

Counter

The number of frames discarded by this port due to excessive transit delay through the bridge.

1.3.6.1.2.1.17.1.4.1.5

Read-Only

Counter

The number of frames discarded by this port due to an excessive size.

1.3.6.1.2.1.17.2

"dot1dStp" group.

1.3.6.1.2.1.17.2.1

Read-Only

Integer

An indication of what version of the Spanning Tree Protocol is being run.

1.3.6.1.2.1.17.2.2

Read-Write

Integer

The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.

1.3.6.1.2.1.17.2.3

Read-Only

TimeTicks

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

1.3.6.1.2.1.17.2.4

Read-Only

Counter

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

1.3.6.1.2.1.17.2.5

Read-Only

BridgeId

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.

1.3.6.1.2.1.17.2.6

Read-Only

Integer

The cost of the path to the root as seen from this bridge.

1.3.6.1.2.1.17.2.7

Read-Only

Integer

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

1.3.6.1.2.1.17.2.8

Read-Only

Timeout

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second.

1.3.6.1.2.1.17.2.9

Read-Only

Timeout

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second.

1.3.6.1.2.1.17.2.10

Read-Only

Integer

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

1.3.6.1.2.1.17.2.11

Read-Only

Timeout

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state.

1.3.6.1.2.1.17.2.12

Read-Write

Timeout

The value that all bridges use for MaxAge when this bridge is acting as the root.

1.3.6.1.2.1.17.2.13

Read-Write

Timeout

The value that all bridges use for HelloTime when this bridge is acting as the root.

1.3.6.1.2.1.17.2.14

Read-Write

Timeout

The value that all bridges use for ForwardDelay when this bridge is acting as the root.

1.3.6.1.2.1.17.2.15

Not-Accessible

Sequence of Dot1dStpPortEntry

A table that contains port-specific information for the Spanning Tree Protocol.

1.3.6.1.2.1.17.2.15.1

Not-Accessible

Dot1dStpPortEntry

A list of information maintained by every port about the Spanning Tree Protocol state for that port.

1.3.6.1.2.1.17.2.15.1.1

Read-Only

Integer

The port number of the port for which this entry contains Spanning Tree Protocol management information.

1.3.6.1.2.1.17.2.15.1.2

Read-Write

Integer

The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.

1.3.6.1.2.1.17.2.15.1.3

Read-Only

Integer

The port's current state as defined by application of the Spanning Tree Protocol.

1.3.6.1.2.1.17.2.15.1.4

Read-Write

Integer

The enabled/disabled status of the port.

1.3.6.1.2.1.17.2.15.1.5

Read-Write

Integer

The contribution of this port to the path cost of paths towards the spanning tree root which include this port.

1.3.6.1.2.1.17.2.15.1.6

Read-Only

BridgeId

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

1.3.6.1.2.1.17.2.15.1.7

Read-Only

Integer

The path cost of the Designated Port of the segment connected to this port.

1.3.6.1.2.1.17.2.15.1.8

Read-Only

BridgeId

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

1.3.6.1.2.1.17.2.15.1.9

Read-Only

Octet String

The Port Identifier of the port on the Designated Bridge for this port's segment.

1.3.6.1.2.1.17.2.15.1.10

Read-Only

Counter

The number of times this port has transitioned from the Learning state to the Forwarding state.

1.3.6.1.2.1.17.4

"dot1dTp" group.

1.3.6.1.2.1.17.4.2

Read-Write

Integer

The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.

1.3.6.1.2.1.17.4.3

Not-Accessible

Sequence of Dot1dTpFdbEntry

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information.

1.3.6.1.2.1.17.4.3.1

Not-Accessible

Dot1dTpFdbEntry

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

1.3.6.1.2.1.17.4.3.1.1

Read-Only

MacAddress

A unicast MAC address for which the bridge has forwarding and/or filtering information.

1.3.6.1.2.1.17.4.3.1.2

Read-Only

Integer

Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.

1.3.6.1.2.1.17.4.3.1.3

Read-Only

Integer

The status of this entry.

1.3.6.1.2.1.17.4.4

Not-Accessible

Sequence of Dot1dTpPortEntry

A table that contains information about every port that is associated with this transparent bridge.

1.3.6.1.2.1.17.4.4.1

Not-Accessible

Dot1dTpPortEntry

A list of information for each port of a transparent bridge.

1.3.6.1.2.1.17.4.4.1.1

Read-Only

Integer

The port number of the port for which this entry contains Transparent bridging management information.

1.3.6.1.2.1.17.4.4.1.2

Read-Only

Integer

The maximum size of the INFO (non-MAC) field that this port will receive or transmit.

1.3.6.1.2.1.17.4.4.1.3

Read-Only

Counter

The number of frames that have been received by this port from its segment.

1.3.6.1.2.1.17.4.4.1.4

Read-Only

Counter

The number of frames that have been transmitted by this port to its segment.

1.3.6.1.2.1.17.4.4.1.5

Read-Only

Counter

Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.

1.3.6.1.2.1.17.5

"dot1dStatic" group.

1.3.6.1.2.1.17.5.1

Not-Accessible

Sequence of Dot1dStaticEntry

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded.

1.3.6.1.2.1.17.5.1.1

Not-Accessible

Dot1dStaticEntry

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

1.3.6.1.2.1.17.5.1.1.1

Read-Write

MacAddress

The destination MAC address in a frame to which this entry's filtering information applies.

1.3.6.1.2.1.17.5.1.1.2

Read-Write

Integer

Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply.

1.3.6.1.2.1.17.5.1.1.3

Read-Write

Octet String

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded.

1.3.6.1.2.1.17.5.1.1.4

Read-Write

Integer

This object indicates the status of this entry.

1.3.6.1.2.1.17.6

The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998.

1.3.6.1.2.1.17.6.1

1.3.6.1.2.1.17.6.1.1

1.3.6.1.2.1.17.6.1.1.1

Read-Only

BITS

Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB.

1.3.6.1.2.1.17.6.1.1.2

Read-Write

TruthValue

The value true(1) indicates that Traffic Classes are enabled on this bridge.

1.3.6.1.2.1.17.6.1.1.3

Read-Write

EnabledStatus

The administrative status requested by management for GMRP.

1.3.6.1.2.1.17.6.1.2

1.3.6.1.2.1.17.6.1.2.1

Not-Accessible

Sequence of Dot1dPortPriorityEntry

A table that contains information about every port that is associated with this transparent bridge.

1.3.6.1.2.1.17.6.1.2.1.1

Not-Accessible

Dot1dPortPriorityEntry

A list of Default User Priorities for each port of a transparent bridge.

1.3.6.1.2.1.17.6.1.2.1.1.1

Read-Write

Integer

The default ingress User Priority for this port.

1.3.6.1.2.1.17.6.1.2.1.1.2

Read-Write

Integer

The number of egress traffic classes supported on this port.

1.3.6.1.2.1.17.6.1.2.3

Not-Accessible

Sequence of Dot1dTrafficClassEntry

A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge.

1.3.6.1.2.1.17.6.1.2.3.1

Not-Accessible

Dot1dTrafficClassEntry

User Priority to Traffic Class mapping.

1.3.6.1.2.1.17.6.1.2.3.1.2

Read-Write

Integer

The Traffic Class the received frame is mapped to.

1.3.6.1.2.1.17.6.1.3

1.3.6.1.2.1.17.6.1.3.1

Not-Accessible

Sequence of Dot1dPortGarpEntry

A table of GARP control information about every bridge port.

1.3.6.1.2.1.17.6.1.3.1.1

Not-Accessible

Dot1dPortGarpEntry

GARP control information for a bridge port.

1.3.6.1.2.1.17.6.1.3.1.1.1

Read-Write

TimeInterval

The GARP Join time, in centiseconds.

1.3.6.1.2.1.17.6.1.3.1.1.2

Read-Write

TimeInterval

The GARP Leave time, in centiseconds.

1.3.6.1.2.1.17.6.1.3.1.1.3

Read-Write

TimeInterval

The GARP LeaveAll time, in centiseconds.

1.3.6.1.2.1.17.7

The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-1998.

1.3.6.1.2.1.17.7.1

1.3.6.1.2.1.17.7.1.1

1.3.6.1.2.1.17.7.1.1.1

Read-Only

Integer

The version number of IEEE 802.1Q that this device supports.

1.3.6.1.2.1.17.7.1.1.2

Read-Only

Integer

The maximum IEEE 802.1Q VLAN ID that this device supports.

1.3.6.1.2.1.17.7.1.1.3

Read-Only

Unsigned32

The maximum number of IEEE 802.1Q VLANs that this device supports.

1.3.6.1.2.1.17.7.1.1.4

Read-Only

Unsigned32

The current number of IEEE 802.1Q VLANs that are configured in this device.

1.3.6.1.2.1.17.7.1.1.5

Read-Write

EnabledStatus

The administrative status requested by management for GVRP.

1.3.6.1.2.1.17.7.1.2

1.3.6.1.2.1.17.7.1.2.1

Not-Accessible

Sequence of Dot1qFdbEntry

A table that contains configuration and control information for each Filtering Database currently operating on this device.

1.3.6.1.2.1.17.7.1.2.1.1

Not-Accessible

Dot1qFdbEntry

Information about a specific Filtering Database.

1.3.6.1.2.1.17.7.1.2.1.1.2

Read-Only

Counter32

The current number of dynamic entries in this Filtering Database.

1.3.6.1.2.1.17.7.1.2.2

Not-Accessible

Sequence of Dot1qTpFdbEntry

A table that contains information about unicast entries for which the device has forwarding and/or filtering information.

1.3.6.1.2.1.17.7.1.2.2.1

Not-Accessible

Dot1qTpFdbEntry

Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.

1.3.6.1.2.1.17.7.1.2.2.1.2

Read-Only

Integer

Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen.

1.3.6.1.2.1.17.7.1.2.2.1.3

Read-Only

Integer

The status of this entry.

1.3.6.1.2.1.31

The MIB module to describe generic objects for network interface sub-layers.

1.3.6.1.2.1.31.1

1.3.6.1.2.1.31.1.1

Not-Accessible

Sequence of IfXEntry

A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.

1.3.6.1.2.1.31.1.1.1

Not-Accessible

IfXEntry

An entry containing additional management information applicable to a particular interface.

1.3.6.1.2.1.31.1.1.1.1

Read-Only

DisplayString

The textual name of the interface.

1.3.6.1.2.1.31.1.1.1.2

Read-Only

Counter32

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.

1.3.6.1.2.1.31.1.1.1.3

Read-Only

Counter32

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.

1.3.6.1.2.1.31.1.1.1.4

Read-Only

Counter32

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

1.3.6.1.2.1.31.1.1.1.5

Read-Only

Counter32

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.

1.3.6.1.2.1.31.1.1.1.6

Read-Only

Counter64

The total number of octets received on the interface, including framing characters.

1.3.6.1.2.1.31.1.1.1.7

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.

1.3.6.1.2.1.31.1.1.1.8

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.

1.3.6.1.2.1.31.1.1.1.9

Read-Only

Counter64

The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.

1.3.6.1.2.1.31.1.1.1.10

Read-Only

Counter64

The total number of octets transmitted out of the interface, including framing characters.

1.3.6.1.2.1.31.1.1.1.11

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.

1.3.6.1.2.1.31.1.1.1.12

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

1.3.6.1.2.1.31.1.1.1.13

Read-Only

Counter64

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.

1.3.6.1.2.1.31.1.1.1.14

Read-Write

Integer

Indicates whether linkUp/linkDown traps should be generated for this interface.

1.3.6.1.2.1.31.1.1.1.15

Read-Only

Gauge32

An estimate of the interface’s current bandwidth in units of 1,000,000 bits per second.

1.3.6.1.2.1.31.1.1.1.16

Read-Write

TruthValue

This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station.

1.3.6.1.2.1.31.1.1.1.17

Read-Only

TruthValue

This object has the value ’true(1)’ if the interface sublayer has a physical connector and the value ’false(2)’ otherwise.

1.3.6.1.2.1.31.1.1.1.18

Read-Write

DisplayString

This object is an ’alias’ name for the interface as specified by a network manager, and provides a non-volatile ’handle’ for the interface.

1.3.6.1.2.1.31.1.1.1.19

Read-Only

TimeStamp

The value of sysUpTime on the most recent occasion at which any one or more of this interface’s counters suffered a discontinuity.

1.3.6.1.2.1.67

The OID assigned to RADIUS MIB work by the IANA.

1.3.6.1.2.1.67.1

1.3.6.1.2.1.67.1.2

The MIB module for entities implementing the client side of the Remote Access Dialin User Service (RADIUS) authentication protocol.

1.3.6.1.2.1.67.1.2.1

1.3.6.1.2.1.67.1.2.1.1

1.3.6.1.2.1.67.1.2.1.1.1

Read-Only

Counter32

The number of RADIUS Access-Response packets received from unknown addresses.

1.3.6.1.2.1.67.1.2.1.1.2

Read-Only

SnmpAdminString

The NAS-Identifier of the RADIUS authentication client.

1.3.6.1.2.1.67.1.2.1.1.3

Not-Accessible

Sequence of RadiusAuthServerEntry

The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.

1.3.6.1.2.1.67.1.2.1.1.3.1

Not-Accessible

RadiusAuthServerEntry

An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.

1.3.6.1.2.1.67.1.2.1.1.3.1.2

Read-Only

IpAddress

The IP address of the RADIUS authentication server referred to in this table entry.

1.3.6.1.2.1.67.1.2.1.1.3.1.3

Read-Only

Integer32

The UDP port the client is using to send requests to this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.4

Read-Only

TimeTicks

The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.

1.3.6.1.2.1.67.1.2.1.1.3.1.5

Read-Only

Counter32

The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.

1.3.6.1.2.1.67.1.2.1.1.3.1.6

Read-Only

Counter32

The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.

1.3.6.1.2.1.67.1.2.1.1.3.1.7

Read-Only

Counter32

The number of RADIUS Access-Accept packets (valid or invalid) received from this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.8

Read-Only

Counter32

The number of RADIUS Access-Reject packets (valid or invalid) received from this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.9

Read-Only

Counter32

The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.10

Read-Only

Counter32

The number of malformed RADIUS Access-Response packets received from this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.11

Read-Only

Counter32

The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.12

Read-Only

Counter32

The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response.

1.3.6.1.2.1.67.1.2.1.1.3.1.13

Read-Only

Counter32

The number of authentication timeouts to this server.

1.3.6.1.2.1.67.1.2.1.1.3.1.14

Read-Only

Counter32

The number of RADIUS packets of unknown type which were received from this server on the authentication port.

1.3.6.1.2.1.67.1.2.1.1.3.1.15

Read-Only

Counter32

The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.

1.3.6.1.2.1.67.2

1.3.6.1.2.1.67.2.2

The MIB module for entities implementing the client side of the Remote Access Dialin User Service (RADIUS) accounting protocol.

1.3.6.1.2.1.67.2.2.1

1.3.6.1.2.1.67.2.2.1.1

1.3.6.1.2.1.67.2.2.1.1.1

Read-Only

Counter32

The number of RADIUS Accounting-Response packets received from unknown addresses.

1.3.6.1.2.1.67.2.2.1.1.2

Read-Only

SnmpAdminString

The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II.

1.3.6.1.2.1.67.2.2.1.1.3

Not-Accessible

Sequence of RadiusAccServerEntry

The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.

1.3.6.1.2.1.67.2.2.1.1.3.1

Not-Accessible

RadiusAccServerEntry

An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.

1.3.6.1.2.1.67.2.2.1.1.3.1.2

Read-Only

IpAddress

The IP address of the RADIUS accounting server referred to in this table entry.

1.3.6.1.2.1.67.2.2.1.1.3.1.3

Read-Only

Integer32

The UDP port the client is using to send requests to this server.

1.3.6.1.2.1.67.2.2.1.1.3.1.4

Read-Only

TimeTicks

The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.

1.3.6.1.2.1.67.2.2.1.1.3.1.5

Read-Only

Counter32

The number of RADIUS Accounting-Request packets sent.

1.3.6.1.2.1.67.2.2.1.1.3.1.6

Read-Only

Counter32

The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server.

1.3.6.1.2.1.67.2.2.1.1.3.1.7

Read-Only

Counter32

The number of RADIUS packets received on the accounting port from this server.

1.3.6.1.2.1.67.2.2.1.1.3.1.8

Read-Only

Counter32

The number of malformed RADIUS Accounting-Response packets received from this server.

1.3.6.1.2.1.67.2.2.1.1.3.1.9

Read-Only

Counter32

The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.

1.3.6.1.2.1.67.2.2.1.1.3.1.10

Read-Only

Gauge32

The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response.

1.3.6.1.2.1.67.2.2.1.1.3.1.11

Read-Only

Counter32

The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up.

1.3.6.1.2.1.67.2.2.1.1.3.1.12

Read-Only

Counter32

The number of RADIUS packets of unknown type which were received from this server on the accounting port.

1.3.6.1.2.1.67.2.2.1.1.3.1.13

Read-Only

Counter32

The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.

1.0.8802.1.1.2

1.0.8802.1.1.2.0

1.0.8802.1.1.2.0.0

1.0.8802.1.1.2.0.0.1

A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls.

1.0.8802.1.1.2.1

1.0.8802.1.1.2.1.1

1.0.8802.1.1.2.1.1.1.1

Read-Write

Integer32

The interval at which LLDP frames are transmitted on behalf of this LLDP agent.

1.0.8802.1.1.2.1.1.1.2

Read-Write

Integer32

The time-to-live value expressed as a multiple of the lldpMessageTxInterval object.

1.0.8802.1.1.2.1.1.1.3

Read-Write

Integer32

The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.

1.0.8802.1.1.2.1.1.1.4

Read-Write

Integer32

The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB.

1.0.8802.1.1.2.1.1.1.5

Read-Write

Integer32

This object controls the transmission of LLDP notifications.

1.0.8802.1.1.2.1.1.1.6

Not-Accessible

Sequence of LldpPortConfigEntry

The table that controls LLDP frame transmission on individual ports.

1.0.8802.1.1.2.1.1.1.6.1

Not-Accessible

LldpPortConfigEntry

LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.

1.0.8802.1.1.2.1.1.1.6.1.1

Not-Accessible

LldpPortConfigEntry (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.

1.0.8802.1.1.2.1.1.1.6.1.2

Read-Write

Integer

The administratively desired status of the local LLDP agent.

1.0.8802.1.1.2.1.1.1.6.1.3

Read-Write

TruthValue

The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.

1.0.8802.1.1.2.1.1.1.6.1.4

Read-Write

BITS

The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management.

1.0.8802.1.1.2.1.1.7

Not-Accessible

Sequence of lldpConfigManAddrEntry

The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.

1.0.8802.1.1.2.1.1.7.1

Not-Accessible

lldpConfigManAddrEntry

LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted.

1.0.8802.1.1.2.1.1.7.1.1

Read-Write

LldpPortList (Octet String)

A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable.

1.0.8802.1.1.2.1.2

1.0.8802.1.1.2.1.2.1

Read-Only

TimeStamp

The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use this object to reduce polling of the lldpRemoteSystemsData objects.

1.0.8802.1.1.2.1.2.2

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.

1.0.8802.1.1.2.1.2.3

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects.

1.0.8802.1.1.2.1.2.4

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.

1.0.8802.1.1.2.1.2.5

Read-Only

ZeroBasedCounter32

The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired.

1.0.8802.1.1.2.1.2.6

Not-Accessible

Sequence of lldpStatsTxPortEntry

A table containing LLDP transmission statistics for individual ports.

1.0.8802.1.1.2.1.2.6.1

Not-Accessible

LldpStatsTxPortEntry

LLDP frame transmission statistics for a particular port.

1.0.8802.1.1.2.1.2.6.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

1.0.8802.1.1.2.1.2.6.1.2

Read-Only

Counter32

The number of LLDP frames transmitted by this LLDP agent on the indicated port.

1.0.8802.1.1.2.1.2.7

Not-Accessible

Sequence of lldpRxStatsPortEntry

A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.

1.0.8802.1.1.2.1.2.7.1

Not-Accessible

LldpRxStatsPortEntry

LLDP frame reception statistics for a particular port.

1.0.8802.1.1.2.1.2.7.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

1.0.8802.1.1.2.1.2.7.1.2

Read-Only

Counter32

The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason.

1.0.8802.1.1.2.1.2.7.1.3

Read-Only

Counter32

The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

1.0.8802.1.1.2.1.2.7.1.4

Read-Only

Counter32

The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.

1.0.8802.1.1.2.1.2.7.1.5

Read-Only

Counter32

The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.

1.0.8802.1.1.2.1.2.7.1.6

Read-Only

Counter32

The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port.

1.0.8802.1.1.2.1.2.7.1.7

Read-Only

Counter32

The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired.

1.0.8802.1.1.2.1.3

1.0.8802.1.1.2.1.3.1

Read-Only

LldpChassisIdSubtype (Integer)

The type of encoding used to identify the chassis associated with the local system.

1.0.8802.1.1.2.1.3.2

Read-Only

LldpChassisId (Octet String)

The string value used to identify the chassis component associated with the local system.

1.0.8802.1.1.2.1.3.3

Read-Only

SNMPAdminstring

The string value used to identify the system name of the local system.

1.0.8802.1.1.2.1.3.4

Read-Only

SNMPAdminstring

The string value used to identify the system description of the local system.

1.0.8802.1.1.2.1.3.5

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are supported on the local system.

1.0.8802.1.1.2.1.3.6

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are enabled on the local system.

1.0.8802.1.1.2.1.3.7

Not-Accessible

Sequence of LldpLocPortEntry

This table contains one or more rows per port information associated with the local system known to this agent.

1.0.8802.1.1.2.1.3.7.1

Not-Accessible

LldpLocPortEntry

Information about a particular port component. Entries may be created and deleted in this table by the agent.

1.0.8802.1.1.2.1.3.7.1.1

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.

1.0.8802.1.1.2.1.3.7.1.2

Read-Only

LldpPortIdSubtype (Integer)

The type of port identifier encoding used in the associated 'lldpLocPortId' object.

1.0.8802.1.1.2.1.3.7.1.3

Read-Only

LldpPortId (Octet String)

The string value used to identify the port component associated with a given port in the local system.

1.0.8802.1.1.2.1.3.7.1.4

Read-Only

SNMPAdminstring

The string value used to identify the IEEE 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.

1.0.8802.1.1.2.1.3.8

Not-Accessible

Sequence of LldpLocManAddrEntry

This table contains management address information on the local system known to this agent.

1.0.8802.1.1.2.1.3.8.1

Not-Accessible

LldpLocManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId.

1.0.8802.1.1.2.1.3.8.1.1

Not-Accessible

AddressFamilyNumbers

The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.

1.0.8802.1.1.2.1.3.8.1.2

Not-Accessible

LldpManAddress (Octet String)

The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.

1.0.8802.1.1.2.1.3.8.1.3

Read-Only

Integer32

The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent.

1.0.8802.1.1.2.1.3.8.1.4

Read-Only

LldpManAddrIfSubtype (Integer)

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.

1.0.8802.1.1.2.1.3.8.1.5

Read-Only

Integer32

The integer value used to identify the interface number regarding the management address component associated with the local system.

1.0.8802.1.1.2.1.3.8.1.6

Read-Only

Object Identifier

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.

1.0.8802.1.1.2.1.4

1.0.8802.1.1.2.1.4.1

Not-Accessible

Sequence of LldpRemEntry

1.0.8802.1.1.2.1.4.1.1

Not-Accessible

LldpRemEntry

Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

1.0.8802.1.1.2.1.4.1.1.1

Not-Accessible

TimeFilter

A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

1.0.8802.1.1.2.1.4.1.1.2

Not-Accessible

LldpPortNumber (Integer32)

The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.

1.0.8802.1.1.2.1.4.1.1.3

Not-Accessible

Integer32

This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.

1.0.8802.1.1.2.1.4.1.1.4

Read-Only

LldpChassisIdSubtype (Integer)

The type of encoding used to identify the chassis associated with the remote system.

1.0.8802.1.1.2.1.4.1.1.5

Read-Only

LldpChassisId (Octet String)

The string value used to identify the chassis component associated with the remote system.

1.0.8802.1.1.2.1.4.1.1.6

Read-Only

LldpPortIdSubtype (Integer)

The type of port identifier encoding used in the associated 'lldpRemPortId' object.

1.0.8802.1.1.2.1.4.1.1.7

Read-Only

LldpPortId (Octet String)

The string value used to identify the port component associated with the remote system.

1.0.8802.1.1.2.1.4.1.1.8

Read-Only

SNMPAdminstring

The string value used to identify the description of the given port associated with the remote system.

1.0.8802.1.1.2.1.4.1.1.9

Read-Only

SNMPAdminstring

The string value used to identify the system name of the remote system.

1.0.8802.1.1.2.1.4.1.1.10

Read-Only

SNMPAdminstring

The string value used to identify the system description of the remote system.

1.0.8802.1.1.2.1.4.1.1.11

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are supported on the remote system.

1.0.8802.1.1.2.1.4.1.1.12

Read-Only

LldpSystemCapabilitiesMap (BITS)

The bitmap value used to identify which system capabilities are enabled on the remote system.

1.0.8802.1.1.2.1.4.2

Not-Accessible

Sequence of LldpRemManAddrEntry

This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.

1.0.8802.1.1.2.1.4.2.1

Not-Accessible

LldpRemManAddrEntry

Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemLocalPortNum of the local system.

1.0.8802.1.1.2.1.4.2.1.1

Not-Accessible

AddressFamilyNumbers

The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.

1.0.8802.1.1.2.1.4.2.1.2

Not-Accessible

LldpManAddress (Octet String)

The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.

1.0.8802.1.1.2.1.4.2.1.3

Read-Only

LldpManAddrIfSubtype (Integer)

The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.

1.0.8802.1.1.2.1.4.2.1.4

Read-Only

Integer32

The integer value used to identify the interface number regarding the management address component associated with the remote system.

1.0.8802.1.1.2.1.4.2.1.5

Read-Only

Object Identifier

The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.

1.0.8802.1.1.2.1.4.3

Not-Accessible

Sequence of LldpRemEntry

1.0.8802.1.1.2.1.4.3.1

Not-Accessible

LldpRemUnknownTLVEntry

Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.

1.0.8802.1.1.2.1.4.3.1.1

Not-Accessible

Integer32

This object represents the value extracted from the type field of the TLV.

1.0.8802.1.1.2.1.4.3.1.2

Read-Only

Octet String

This object represents the value extracted from the value field of the TLV.

1.0.8802.1.1.2.1.4.4

Not-Accessible

Sequence of LldpRemOrgDefInfoEntry

This table contains one or more rows per physical network connection which advertises the organizationally defined information.

1.0.8802.1.1.2.1.4.4.1

Not-Accessible

LldpRemOrgDefInfoEntry

Information about the unrecognized organizationally defined information advertised by the remote system.

1.0.8802.1.1.2.1.4.4.1.1

Not-Accessible

Octet String

The Organizationally Unique Identifier (OUI), as defined in IEEE Std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.

1.0.8802.1.1.2.1.4.4.1.2

Not-Accessible

Integer32

The integer value used to identify the subtype of the organizationally defined information received from the remote system.

1.0.8802.1.1.2.1.4.4.1.3

Not-Accessible

Integer32

This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance, unique only for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype from the same remote system.

1.0.8802.1.1.2.1.4.4.1.4

Read-Only

Octet String

The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC.

1.0.8802.1.1.2.1.5

1.0.8802.1.1.2.1.5.4623

The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node.

1.0.8802.1.1.2.1.5.4623.1

1.0.8802.1.1.2.1.5.4623.1.1

1.0.8802.1.1.2.1.5.4623.1.1.1

Not-Accessible

Sequence of LldpXdot3PortConfigEntry

A table that controls selection of LLDP TLVs to be transmitted on individual ports.

1.0.8802.1.1.2.1.5.4623.1.1.1.1

Not-Accessible

LldpXdot3PortConfigEntry

LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports.

1.0.8802.1.1.2.1.5.4623.1.1.1.1.1

Read-Write

BITS

The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype.

1.0.8802.1.1.2.1.5.4623.1.2

1.0.8802.1.1.2.1.5.4623.1.2.1

Not-Accessible

Sequence of LldpXdot3LocPortEntry

This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

1.0.8802.1.1.2.1.5.4623.1.2.1.1

Not-Accessible

LldpXdot3LocPortEntry

Information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.2.1.1.1

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.

1.0.8802.1.1.2.1.5.4623.1.2.1.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.

1.0.8802.1.1.2.1.5.4623.1.2.1.1.3

Read-Only

Octet String

This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.1.1.4

Read-Only

Integer32

An integer value that indicates the operational MAU type of the given port on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2

Not-Accessible

Sequence of LldpXdot3LocPowerEntry

This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

1.0.8802.1.1.2.1.5.4623.1.2.2.1

Not-Accessible

LldpXdot3LocPowerEntry

Information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.1

Read-Only

LldpPowerPortClass (Integer)

The value that identifies the port Class of the given port associated with the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.3

Read-Only

TruthValue (Integer)

The truth value used to identify whether MDI power is enabled on the given port associated with the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.4

Read-Only

TruthValue (Integer)

The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.5

Read-Only

Integer32

This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.2.1.6

Read-Only

Integer32

This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.3

Not-Accessible

Sequence of LldpXdot3LocLinkAggEntry

This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

1.0.8802.1.1.2.1.5.4623.1.2.3.1

Not-Accessible

LldpXdot3LocLinkAggEntry

Link Aggregation information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.2.3.1.1

Read-Only

LldpLinkAggStatusMap (BITS)

The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.

1.0.8802.1.1.2.1.5.4623.1.2.3.1.2

Read-Only

Integer32

This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation.

1.0.8802.1.1.2.1.5.4623.1.2.4

Not-Accessible

Sequence of LldpXdot3LocMaxFrameSizeEntry

This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.

1.0.8802.1.1.2.1.5.4623.1.2.4.1

Not-Accessible

LldpXdot3LocMaxFrameSizeEntry

Maximum Frame Size information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.2.4.1.1

Read-Only

Integer32

An integer value indicating the maximum supported frame size in octets on the given port of the local system.

1.0.8802.1.1.2.1.5.4623.1.2.5.1

Not-Accessible

LldpXdot3LocLpiEntry

Information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.1

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system can support in the transmit direction.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.2

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is advertising that it can support in the transmit direction and is echoed by the local system under the control of the EEE DLL receiver state diagram.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.3

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is requesting in the receive direction.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.4

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system under the control of the EEE DLL transmitter state diagram.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.5

Read-Only

Integer

A GET attribute that returns the value of the fallback Tw_sys that the local system is advertising to the remote system.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.6

Read-Only

Integer

A GET operation returns the initialization status of the EEE transmit Data Link Layer management function on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.7

Read-Only

Integer

A GET operation returns the initialization status of the EEE receive Data Link Layer management function on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.8

Read-Only

Integer

A GET operation returns the status of the EEE capability negotiation on the local system.

1.0.8802.1.1.2.1.5.4623.1.2.5.1.9

Read-Only

BITS

A read-only list of the possible PHY types for which the underlying system supports Energy Efficient Ethernet (EEE) as defined in Clause 78.

1.0.8802.1.1.2.1.5.4623.1.3

Not-Accessible

Sequence of LldpXdot3RemPortEntry

This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.1

Not-Accessible

Sequence of LldpXdot3RemPowerEntry

This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.1.1

Not-Accessible

LldpXdot3RemPortEntry

Information about a particular physical network connection.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.1

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.3

Read-Only

Octet String

This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.4

Read-Only

Integer32

An integer value that indicates the operational MAU type of the sending device.

1.0.8802.1.1.2.1.5.4623.1.3.2

Not-Accessible

Sequence of LldpXdot3RemPowerEntry

This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1

Not-Accessible

LldpXdot3RemPowerEntry

Information about a particular physical network connection.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.1

Read-Only

LldpPowerPortClass (Integer)

The value that identifies the port Class of the given port associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.2

Read-Only

TruthValue (Integer)

The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.3

Read-Only

TruthValue (Integer)

The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.4

Read-Only

TruthValue (Integer)

The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.5

Read-Only

Integer32

This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.2.1.6

Read-Only

Integer32

This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.3

Not-Accessible

Sequence of LldpXdot3RemLinkAggEntry

This table contains port link aggregation information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.3.1

Not-Accessible

LldpXdot3RemLinkAggEntry

Link Aggregation information about remote system's port component.

1.0.8802.1.1.2.1.5.4623.1.3.3.1.1

Read-Only

LldpLinkAggStatusMap (BITS)

The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.

1.0.8802.1.1.2.1.5.4623.1.3.3.1.2

Read-Only

Integer32

This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE Std 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.4

Not-Accessible

Sequence of LldpXdot3RemMaxFrameSizeEntry

This table contains one row per port of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.4.1

Not-Accessible

LldpXdot3RemMaxFrameSizeEntry

Maximum Frame Size information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.3.4.1.1

Read-Only

Integer32

An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.

1.0.8802.1.1.2.1.5.4623.1.3.5.1

Not-Accessible

LldpXdot3RemLpiEntry

Maximum Frame Size information about a particular port component.

1.0.8802.1.1.2.1.5.4623.1.3.5.1.1

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system can support in the transmit direction.

1.0.8802.1.1.2.1.5.4623.1.3.5.1.2

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is advertising that it can support in the transmit direction as echoed by the remote system under the control of the EEE DLL receiver state diagram.

1.0.8802.1.1.2.1.5.4623.1.3.5.1.3

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the remote system is requesting in the receive direction.

1.0.8802.1.1.2.1.5.4623.1.3.5.1.4

Read-Only

Integer

A GET attribute that returns the value of Tw_sys that the local system is advertising that it is requesting in the receive direction as echoed by the remote system under the control of the EEE DLL transmitter state diagram.

1.0.8802.1.1.2.1.5.4623.1.3.5.1.5

Read-Only

Integer

A GET attribute that returns the value of fallback Tw_sys that the remote system is advertising.

1.0.8802.1.1.2.1.5.4795

1.0.8802.1.1.2.1.5.4795.0

1.0.8802.1.1.2.1.5.4795.0.1

A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another.

1.0.8802.1.1.2.1.5.4795.1

1.0.8802.1.1.2.1.5.4795.1.1

1.0.8802.1.1.2.1.5.4795.1.1.1

Read-Only

LldpXMedDeviceClass

Local Device Class.

1.0.8802.1.1.2.1.5.4795.1.1.2

Not-Accessible

Sequence of LldpXMedPortConfigEntry

A table that controls selection of LLDP TLVs to be transmitted on individual ports.

1.0.8802.1.1.2.1.5.4795.1.1.2.1

Not-Accessible

LldpXMedPortConfigEntry

LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports.

1.0.8802.1.1.2.1.5.4795.1.1.2.1.1

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device.

1.0.8802.1.1.2.1.5.4795.1.1.2.1.2

Read-Write

LldpXMedCapabilities

The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management.

1.0.8802.1.1.2.1.5.4795.1.1.2.1.3

Read-Write

Integer

A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port.

1.0.8802.1.1.2.1.5.4795.1.1.3

Read-Write

Unsigned32

The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED.

1.0.8802.1.1.2.1.5.4795.1.2

1.0.8802.1.1.2.1.5.4795.1.2.1

Not-Accessible

Sequence of LldpXMedLocMediaPolicyEntry

This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent.

1.0.8802.1.1.2.1.5.4795.1.2.1.1

Not-Accessible

LldpXMedLocMediaPolicyEntry

Information about a particular policy on a specific port component.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.1

Not-Accessible

PolicyAppType

The media type that defines the primary function of the application for the policy advertised by an endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.2

Read-Only

Integer32

An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.3

Read-Only

Integer32

This object contains the value of the 802.1p priority which is associated with the given port on the local system.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.4

Read-Only

Integer33

This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.5

Read-Only

TruthValue

A value of 'true' indicates that the network policy for the specified application type is currently unknown.

1.0.8802.1.1.2.1.5.4795.1.2.1.1.6

Read-Only

TruthValue

A value of 'true' indicates that the application is using a tagged VLAN.

1.0.8802.1.1.2.1.5.4795.1.2.2

Read-Only

SnmpAdminString

The vendor-specific hardware revision string as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.3

Read-Only

SnmpAdminString

The vendor-specific firmware revision string as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.4

Read-Only

SnmpAdminString

The vendor-specific software revision string as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.5

Read-Only

SnmpAdminString

The vendor-specific serial number as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.6

Read-Only

SnmpAdminString

The vendor-specific manufacturer name as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.7

Read-Only

SnmpAdminString

The vendor-specific model name as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.8

Read-Only

SnmpAdminString

The vendor-specific asset tracking identifier as advertised by the endpoint.

1.0.8802.1.1.2.1.5.4795.1.2.9

Not-Accessible

Sequence of LldpXMedLocLocationEntry

This table contains Location information as advertised by the local system.

1.0.8802.1.1.2.1.5.4795.1.2.9.1

Not-Accessible

LldpXMedLocLocationEntry

Information about Location information for the local device.

1.0.8802.1.1.2.1.5.4795.1.2.9.1.1

Not-Accessible

LocationSubtype

The location subtype advertised by the local device.

1.0.8802.1.1.2.1.5.4795.1.2.9.1.2

Read-Write

Octet String

The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object.

1.0.8802.1.1.2.1.5.4795.1.2.10

Read-Only

Integer

Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device.

1.0.8802.1.1.2.1.5.4795.1.2.11

Not-Accessible

Sequence of LldpXMedLocXPoEPSEPortEntry

This table contains one row per port of PSE PoE information on the local system known to this agent.

1.0.8802.1.1.2.1.5.4795.1.2.11.1

Not-Accessible

LldpXMedLocXPoEPSEPortEntry

Information about a particular port PoE information.

1.0.8802.1.1.2.1.5.4795.1.2.11.1.1

Read-Only

Gauge32

This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts.

1.0.8802.1.1.2.1.5.4795.1.2.11.1.2

Read-Only

Integer

Reflects the PD power priority that is being advertised on this PSE port.

1.0.8802.1.1.2.1.5.4795.1.2.12

Read-Only

Integer

Defines the type of PSE Power Source advertised by the local device.

1.0.8802.1.1.2.1.5.4795.1.2.13

Read-Only

Gauge32

This object contains the value of the power required by a PD expressed in units of 0.1 watts.

1.0.8802.1.1.2.1.5.4795.1.2.14

Read-Only

Integer

Defines the type of Power Source advertised as being used by the local device.

1.0.8802.1.1.2.1.5.4795.1.2.15

Read-Only

Integer

Defines the priority advertised as being required by this PD.

1.0.8802.1.1.2.1.5.4795.1.3

1.0.8802.1.1.2.1.5.4795.1.3.1

Not-Accessible

Sequence of LldpXMedRemCapabilitiesEntry

A table that displays LLDP-MED capabilities of remote devices connected to individual ports.

1.0.8802.1.1.2.1.5.4795.1.3.1.1

Not-Accessible

LldpXMedRemCapabilitiesEntry

LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED.

1.0.8802.1.1.2.1.5.4795.1.3.1.1.1

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port.

1.0.8802.1.1.2.1.5.4795.1.3.1.1.2

Read-Only

LldpXMedCapabilities

The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port.

1.0.8802.1.1.2.1.5.4795.1.3.1.1.3

Read-Only

LldpXMedDeviceClass

Device Class as advertised by the device remotely connected to the port.

1.0.8802.1.1.2.1.5.4795.1.3.2

Not-Accessible

Sequence of LldpXMedRemMediaPolicyEntry

This table contains media policy information as advertised by the remote system.

1.0.8802.1.1.2.1.5.4795.1.3.2.1

Not-Accessible

LldpXMedRemMediaPolicyEntry

Information about the per port per policy type policy information for a particular physical network connection.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.1

Not-Accessible

PolicyAppType

The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.2

Read-Only

Integer32

An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.3

Read-Only

Integer32

This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.4

Read-Only

Integer32

This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.5

Read-Only

TruthValue

A value of 'true' indicates that the network policy for the specified application type is currently unknown.

1.0.8802.1.1.2.1.5.4795.1.3.2.1.6

Read-Only

TruthValue

A value of 'true' indicates that the application is using a tagged VLAN.

1.0.8802.1.1.2.1.5.4795.1.3.3

Not-Accessible

Sequence of LldpXMedRemInventoryEntry

This table contains inventory information as advertised by the remote system.

1.0.8802.1.1.2.1.5.4795.1.3.3.1

Not-Accessible

LldpXMedRemInventoryEntry

Information about inventory information for the remote devices connected to the ports.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.1

Read-Only

SnmpAdminString

The vendor-specific hardware revision string as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.2

Read-Only

SnmpAdminString

The vendor-specific firmware revision string as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.3

Read-Only

SnmpAdminString

The vendor-specific software revision string as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.4

Read-Only

SnmpAdminString

The vendor-specific serial number as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.5

Read-Only

SnmpAdminString

The vendor-specific manufacturer name as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.6

Read-Only

SnmpAdminString

The vendor-specific model name as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.3.1.7

Read-Only

SnmpAdminString

The vendor-specific asset tracking identifier as advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.4

Not-Accessible

Sequence of LldpXMedRemLocationEntry

This table contains Location information as advertised by the remote system.

1.0.8802.1.1.2.1.5.4795.1.3.4.1

Not-Accessible

LldpXMedRemLocationEntry

Information about Location information for the remote devices connected to the ports.

1.0.8802.1.1.2.1.5.4795.1.3.4.1.1

Not-Accessible

LocationSubtype

The location subtype advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.4.1.2

Read-Only

OCTET STRING

The location information advertised by the remote endpoint.

1.0.8802.1.1.2.1.5.4795.1.3.5

Not-Accessible

Sequence of LldpXMedRemXPoEEntry

This table contains information about the PoE device type as advertised by the remote system.

1.0.8802.1.1.2.1.5.4795.1.3.5.1

Not-Accessible

LldpXMedRemXPoEEntry

Information about PoE type of the remote devices connected to the ports.

1.0.8802.1.1.2.1.5.4795.1.3.5.1.1

Read-Only

Integer

Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device.

1.0.8802.1.1.2.1.5.4795.1.3.6

Not-Accessible

Sequence of LldpXMedRemXPoEPSEEntry

This table contains extended PoE information as advertised by the remote devices of PSE type.

1.0.8802.1.1.2.1.5.4795.1.3.6.1

Not-Accessible

LldpXMedRemXPoEPSEEntry

Information about Extended PoE PSE information for the remote devices connected to the ports.

1.0.8802.1.1.2.1.5.4795.1.3.6.1.1

Read-Only

Gauge32

This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.

1.0.8802.1.1.2.1.5.4795.1.3.6.1.2

Read-Only

Integer

Defines the type of PSE Power Source advertised by the remote device.

1.0.8802.1.1.2.1.5.4795.1.3.6.1.3

Read-Only

Integer

This object contains the value of the PSE power priority advertised by the remote device.

1.0.8802.1.1.2.1.5.4795.1.3.7

Not-Accessible

Sequence of LldpXMedRemXPoEPDEntry

This table contains extended PoE information as advertised by the remote devices of PD type.

1.0.8802.1.1.2.1.5.4795.1.3.7.1

Not-Accessible

LldpXMedRemXPoEPDEntry

Information about XPoEPD information for the remote devices connected to the ports.

1.0.8802.1.1.2.1.5.4795.1.3.7.1.1

Read-Only

Gauge32

This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts.

1.0.8802.1.1.2.1.5.4795.1.3.7.1.2

Read-Only

Integer

Defines the type of Power Source advertised as being used by the device connected remotely to the port.

1.0.8802.1.1.2.1.5.4795.1.3.7.1.3

Read-Only

Integer

Defines the priority advertised as being required by the PD connected remotely to the port.