T1700G-28TQ

Discontinuado

JetStream 24-Port Gigabit Stackable Smart Switch with 4 10GE SFP+ Slots

  • True physical stacking supports up to 6 units and 40Gbps bi-directional bandwidth for high scalability and efficient redundancy
  • 10G SFP+ ports for stacking and/or uplink, providing support for high-bandwidth applications for congestion relief and smooth data delivery
  • L2+ feature, Static Routing help route internal traffic for more efficient use of network resources
  • Advanced security features include IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, and Radius Authentication
  • IPv6 support provides dual IPv4/IPv6 stacking, MLD snooping, and IPv6 neighbor discovery
  • WEB/CLI managed modes, SNMP, RMON, and Dual Image  enhance management

Affordable 10-Gigabit Switching Solution for Growing SMBs

 T1700 Series 10G Smart Switches

In a world of expanding enterprises and growing virtualization, cloud-based services and applications, like VoIP, HD streaming video, and IP surveillance, SMB networks need to evolve beyond simple reliability to provide increased scalability, higher bandwidth, and enhanced performance. TP-LINK’s new T1700 Series 10G Smart Switches represent an ideal solution that meets these requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions.

 
T1700X-16TS
 

FULL 10-GIGABIT
SMART SWITCH

 12-Port 10GBase-T Smart Switch
with 4 10G SFP+ Slots

 

Future-Proof
10GBase-T Technology

Until recently, 10-Gigabit connectivity was available only in the expensive fiber based technology that supports high-speed access to the network backbone or data center environment.

Today, 10GBase-T Technology is becoming more common and affordable. Low-Latency, Line-Rate 10G Copper Base-T is backward compatible with Fast Ethernet and Gigabit Ethernet and can automatically negotiate between higher and lower speed connections. Most importantly, 10GBase-T provides a cost-effective method for migrating from your current network to 10G Ethernet by utilizing your existing CAT5e/CAT6 RJ-45 short connections (up to 55m) and CAT6A/CAT7 connections (up to 100m). This reduces cabling complexity and ultimately results in significant savings for customers.

16 10-Gigabit Ports,
320Gbps Switching Capacity

The T1700X-16TS features 12 10GBase-T RJ45 ports and four dedicated SFP+ fiber slots, which can support up to 320Gbps of combined switching bandwidth. This provides great resiliency, relieves congestion associated with bandwidth-intensive applications, and guarantees smooth data transmission.

 
T1700G-28TQ
 

GIGABIT STACKABLE
WITH 10G UPLINK

 24-Port Gigabit Stackable Smart Switch
with 4 10GE SFP+ Slots

Physical Stacking

With True Physical Stacking Technology, up to six T1700G-28TQ units can be stacked with a single IP address.
This provides enhanced scalability, simple management, and increased redundancy for high-density deployment. It also supports efficient network expansion in the future.

  • 6 Units

    True Physical Stacking Technology of up to six units supports network simplification

  • 144 GE Ports

    Up to 144 Gigabit Ethernet ports per stack

  • 24 10G SFP+

    Up to 24 10G SFP+ slots per stack

  • 768 Gbps

    Up to 768Gbps of switching capacity for aggregated networks

  • 1 Management IP

    With all units identified by a single IP address, configuring and monitoring the stack is easy

 

Fanless Design for Silent Operation

The T1700G-28TQ utilizes a fanless design, which reduces the amount of ambient noise in your office. Removing the fan also reduces power consumption and helps you build a more cost-effective network.

Software Features

  • L2+ Static Routing

    Simple network segmentation, with internal routing through the switch, allows devices in different VLANs/subnets to communicate with each other and makes the flow of network traffic more efficient.

  • Abundant L2 Features

    T1700 Series devices are equipped with a full lineup of L2 features that meet your current and future needs for unified networking and mobility.

    802.1Q/MAC/Protocol/Private VLAN1

    Link Aggregation Group (LAG)

    IGMP & MLD Snooping

    Multicast VLAN

  • Robust Security Strategies

    Support for numerous security strategies allow you to create a secure, unified network by preventing unauthorized access, external attacks, and malware infiltration.

    Access Control List (ACL)

    DHCP Snooping

    802.1x Authentication

    IP-MAC-Port Binding

  • Comprehensive QoS Features

    Advanced controls provide optimized network performance and efficient delivery of time-sensitive traffic.

    Port-Based or 802.1p-Based Prioritization

    Layer 3-Based (DSCP) Prioritization

    Rate Limit

    Voice VLAN

  • IPv6 Support

    The T1700 Series offers comprehensive IPv6 features, including IPv6 management, Static Routing, ACL, and QoS2, which ease the transition to an IPv6-based network and protect the value of your investment.

  • Dual Image

    Dual image firmware reduces downtime when the firmware is being updated. The backup image will also be activated in the event that any error occurs on the active image.

1 Only T1700X-16TS supports Private VLAN

2 IPv6 Static Routing/ACL/QoS will be supported in a future firmware release

Hardware Specifications

  T1700X-16TS T1700G-28TQ
10/100/1000Mbps RJ45 Ports - 24
10GBase-T RJ45 Ports 12 -
Uplink 4 Dedicated 10G SFP+ 4 Dedicated 10G SFP+
Switching Capacity 320Gbps 128Gbps
Dimensions(W×D×H) 17.3×8.7×1.73 in.
(440×220×44mm)
17.3×7.1×1.73 in.
(440×180×44mm)
Fan Quatity Two Smart Fans Fanless
Find More Details Go> Go>

Accessories

  • 10GBase-SR SFP+ LC Transceiver

    850nm multi-mode transceiver
    300m max distance
    LC/UPC Connector

    TXM431-SR

  • 10GBase-LR SFP+ LC Transceiver

    1310nm single-mode transceiver
    10km max distance
    LC/UPC Connector

    TXM431-LR

  • 1M/3M Direct Attach SFP+ Cable

    1M/3M cable length
    SFP+ connector on both sides

    TXC432-CU1M / TXC432-CU3M

Más >

Casos relacionados

  • Soborka ISP

    TP-Link Helps ISP Soborka Provide Better Service for Subscribers

    Soborka ISP

    TP-Link Helps ISP Soborka Provide Better Service for Subscribers

    “TP-Link’s products offer tremendous value, which allowed us to reduce the cost of updating our large network without compromising performance. Our customers are much more satisfied with the network since the upgrade. It has done a lot to improve our reputation.” —Soborka's CEO
CARACTERÍSTICAS DE HARDWARE
Estándares y Protocolos IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p
Interface 24 10/100/1000Mbps RJ45 Ports
4 fixed 10G SFP+ Slots
Medios de red 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m)
1000BASE-X: MMF, SMF
10GBASE-LR
10GBASE-SR
Cantidad de ventiladores Fanless
Bloqueo de seguridad física Yes
Fuente de alimentación 100-240V, 50/60Hz
Consumo de Poder 21.8W
Peso 2.8kg
Dimensiones (An x Pr x Al) 17.32 * 7.1 * 1.73 in. (440 * 180 * 44 mm)
Montaje Rack Mountable
Consumo máximo de energía 21.8W (220V/50Hz)
Disipación de calor máxima 74.38 BTU/h
APILAMIENTO FÍSICO
Transceptores SFP + instalables y cables de cobre de conexión directa (DAC) TXM431-SR
TXM432-LR
TXC432-CU1M
TXC432-CU3M
Número máximo de puertos de apilamiento instalables 2 SFP+
Velocidad de apilamiento (por puerto) 20Gbps (Full-Duplex)
No. de unidades por pila Up to 6 units
DESEMPEÑO
Capacidad de conmutación Up to 128Gbps for a standalone switch
Tasa de reenvío de paquetes Up to 95.2Mpps for a standalone switch
Tabla de direcciones MAC 16K
Memoria de búfer de paquetes 1.5MB
Marco Jumbo 9KB
Número de rutas estáticas 32 IPv4
Número de interfaces IP 16
FUNCIONES DE SOFTWARE
Calidad de servicio Support 802.1p CoS/DSCP priority
Support 8 priority queues
Queue scheduling: SP, WRR, SP+WRR
Port/Flow- based Rate Limiting
IPv6 QoS*
Voice VLAN
Funciones L2 y L2 + Static Routing
DHCP Relay*
IGMP Snooping V1/V2/V3
802.3ad LACP (Up to 14 aggregation groups, containing 8 ports per group)
Spanning Tree STP/RSTP/MSTP
BPDU Filtering/Guard
TC/Root Protect
Loopback detection
802.3x Flow Control
LLDP, LLDP-MED*
VLAN Supports up to 4K VLANs simultaneously (out of 4K VLAN IDs)
MAC/Protocol-based VLAN
Lista de control de acceso L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports
IPv6 ACL*
Seguridad AAA*
Port Security
DHCP Snooping
IP-MAC-Port Binding
ARP Inspection
802.1x and Radius Authentication
SSH v1/v2
SSL v3/TLSv1
Broadcast/Multicast/Unknown-unicast Storm Control
Dos Defend
IPv6 Dual IPv4/IPv6 stack
Multicast Listener Discovery (MLD) Snooping
IPv6 neighbor discovery (ND)
Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Aplicaciones IPv6 DHCPv6 Client
Ping6
Tracert6
Telnet (v6)
IPv6 SNMP
IPv6 SSH
IPv6 SSL
Http/Https
IPv6 TFTP
Gestión Web-based GUI and CLI management
SNMP v1/v2c/v3,compatible with public MIBs and
TP-LINK private MIBs
RMON (1, 2, 3, 9 groups)
CPU Monitoring
Port Mirroring
Firmware Upgrade: TFTP & Web
System Diagnose: VCT
SYSLOG & Public MIBS
Dual Image


*These features will be supported in a future firmware release.
OTROS
Certificación CE, FCC, RoHS
contenidos del paquete T1700G-28TQ
Power Cord
Installation Guide
Resource CD
Rackmount Kit
Rubber Feet
Requisitos del sistema Microsoft® Windows® XP, Vista™ or Windows 7, Windows 8/8.1, MAC® OS, NetWare®, UNIX® or Linux.
Ambiente Operating Temperature: 0℃~40℃ (32℉~104℉);
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90%RH non-condensing
Storage Humidity: 5%~90%RH non-condensing

Desde United States?

Obtenga productos, eventos y servicios para su región.