TL-WA7210N
Discontinuado2.4GHz 150Mbps Outdoor Wireless Access Point
- 12dBi dual-polarized directional antenna boosts wireless range
- Dedicated power amplifier and low noise amplifier improve radio performance
- Complies with IEEE 802.11b/g/n, wireless speed up to 150Mbps
- Outdoor weatherproof and 4000V lightning/15KV ESD protection design
High Transimission Capability
With up to 500mw wireless transmission power and a 12dBi dual-polarized high gain antenna, the TL-WA7210N can produce and pick up a powerful and stable signal for a wireless connection ranging multiple kilometers.
Dual-polarized
antenna
Professional Outdoor Design
TL-WA7210N features a weatherproof enclosure and special protection against ESD and lightning. It supports passive Power over Ethernet (PoE), making it a versatile outdoor networking solution.
Grounding Terminal External Antenna
PoE supported
at up to 60 meters
Special Handle-Designed for Installation
Multiple Applications
Intelligent Management Tools
-
- Tool 1: Antenna Alignment
- Users can use the antenna alignment tool to adjust the direction of their APs using a live signal strength meter to judge which direction is best making setup that much simpler.
-
- Tool 2: Distance Setting
- With the AP’s ACK timeout tool able to adjust the distance between two APs, it allows users to set a specific distance in order to establish the most robust wireless connection possible.
-
- Tool 3: Ping Watch Dog
- Ping Watch Dog enables users to maintain the ping command to check the quality of the wireless link and can reboot the remote AP if the wireless signal becomes worse or disconnects.
Related Products
54Mbps 2.4GHz150Mbps 5GHz
-
- 2.4GHz High Power Wireless Outdoor CPE
- TL-WA5210G
-
- 5GHz 150Mbps Outdoor Wireless Access Point
- TL-WA7510N
| CPE510 | CPE210 | TL-WA7510N | TL-WA7210N | TL-WA5210G | |
|---|---|---|---|---|---|
| Wireless Performance | |||||
| Wireless Speed | 5GHz 300Mbps | 2.4GHz 300Mbps | 5GHz 150Mbps | 2.4GHz 150Mbps | 2.4GHz 54Mbps |
| Transmit Power | 23dBm | 27dBm | 27dBm | 27dBm | 27dBm |
| Antenna | 13dBi | 9dBi | 15dBi | 12dBi | 12dBi |
| MIMO | √ | √ | - | - | - |
| Coverage Range | 15km+ | 5km+ | 5km+ | 5km+ | 2km+ |
| Hardware | |||||
| Processor | 560MHz | 560MHz | 400MHz | 400MHz | 180MHz |
| Memory | 64MB DDR2 | 64MB DDR2 | 32MB DDR | 32MB DDR | 16MB DDR |
| Compatibility | 802.11a/n | 802.11b/g/n | 802.11a/n | 802.11b/g/n | 802.11 b/g |
| External Antenna Interface | - | - | 1 * RP-SMA | 1 * RP-SMA | 1 * RP-SMA |
| Weatherproof Enclosure | √(IPX5) | √(IPX5) | √ | √ | √ |
| Dual Ethernet Ports | √ | √ | - | - | - |
| PoE Passthrough | √ | √ | - | - | - |
| Grounding Terminal | √ | √ | √ | √ | √ |
| Lightning Protection over Ethernet Cable |
√ | √ | - | - | - |
| ESD Protection | 15kV | 15kV | 15kV | 15kV | 15kV |
| Lightning Protection | 6kV | 6kV | 4kV | 4kV | 4kV |
| Power Supply | 24V Passive PoE Adapter |
24V Passive PoE Adapter |
12V Power Adapter + Passive PoE Injector | ||
| Software | |||||
| Operation Modes | AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode | ||||
| MAXtream TDMA Mode | √ | √ | - | - | - |
| Channel Bandwidth | 5/10/20/40MHz | 5/10/20/40MHz | 20/40MHz | 20/40MHz | 20MHz |
| Transmit Power Control | Stepping 1dBm | Stepping 1dBm | Stepping 3dBm | Stepping 3dBm | - |
| Antenna Alignment | √ | √ | √ | √ | √ |
| Throughtput Monitors | √ | √ | - | - | - |
| Spectrum Analyzer | √ | √ | - | - | - |
| Iperf Speed Test Tool | √ | √ | - | - | - |
| Pharos Control Supported (Central Network Management Application) |
√ | √ | - | - | - |
Más >
Casos relacionados
-
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
“The performance of CPE was better than expected, working stable even with -85 dBm of received power.” —David Grillo, Engineer, Kroton -
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
“Amazing! The performance of the Pharos Wireless Broadband Solution has exceeded even our wildest expectations.” —Bagus Prakoso, Owner of ADINET
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | 1 Puerto RJ45 10/100Mbps Auto-Detector (Auto MDI/MDIX, PoE) 1 Conector SMA inverso externo 1 Terminal Puesta a tierra |
| Botón | Botón Reset |
| Fuente de alimentación externa | 12VDC / 1.0A, Passvie Power over Ethernet (Soporta longitud de CAble Ethernet > 60 metros) |
| Estándares inalámbricos | IEEE 802.11n,IEEE 802.11g, IEEE 802.11b |
| Dimensiones (An x Pr x Al) | 10.4 × 4.7 × 3.2 pulg. (265x120x83mm) |
| Antena | Antena Direccional de 12dBi con Polarizado Dual |
| Ancho de haz de antena | Horizontal: 60° Vertical: 30° |
| Protección | Protección 15KV ESD Protección Contra Rayos 4000V Terminal Puesta a Tierra Integrada |
| CARACTERÍSTICAS INALÁMBRICAS | |
|---|---|
| Frecuencia | 2.4-2.4835GHz |
| Tasa de señal | 11n: Hasta 150Mbps(dinámica) 11g: Hasta 54Mbps(dinámica) 11b: Hasta 11Mbps(dinámica) |
| Sensibilidad de recepción | 802.11n 150M: -76dBm 121.5M: -78dBm 108M: -80dBm 81M: -84dBm 54M:-87dBm 40.5M:-91dBm 27M:-92dBm 13.5M:-95dBm 802.11g 54M: -79dBm 48M: -81dBm 36M: -85dBm 12M: -92dBm 6M:-95dBm |
| Modos inalámbricos | Modo AP Router Modo AP Cliente Router (WISP Cliente) Modo AP / Cliente / Puente / Repetidor |
| Funciones inalámbricas | Puente WDS, Estadísticas Inalámbricas |
| Seguridad inalámbrica | SSID Hablitiado/ Deshabilitado Filtrado de Dirección MAC Encriptación 64/128/152-bit WEP n, WPA/WPA2, Encriptación WPA-PSK/WPA2-PSK (AES/TKIP) |
| Funciones avanzadas | Proporciona 4 niveles indicadores de señal con LED |
| Poder de transmision | <20dBm (EIRP, Para los países que usan el estándar CE) <27dBm (Pico de potencia de salida, Para Países de usan el estándar FCC) |
| OTROS | |
|---|---|
| Certificación | CE, FCC, RoHS |
| contenidos del paquete | TL-WA7210N Fuente de Alimentación Inyector PoE Kit Para Montaje en Poste CD de Instalación Guía de Instalación Rápida |
| Requisitos del sistema | Microsoft Windows 98SE, NT, 2000, XP, Vista™ o Windows 7/8, MAC OS, NetWare, UNIX o Linux. |
| Ambiente | Temperatura de Funcionamiento: -30°C~70°C (-22℉~158℉) Temperatura de Almacenamiento: -40℃~70℃ (-40℉~158℉) Humedad de Funcionamiento: 10%~90% sin condensación Humedad de Almacenamiento: 5%~95% sin condensación |