2.4GHz 300Mbps 9dBi Outdoor CPE
- Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 25dBm/500mw
- System-level optimizations for more than 5km long-range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meters (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Learn more about Pharos Control >
Learn more about Pharos Long-Range Outdoor Wireless Broadband>
2.4GHz 300Mbps 9dBi Outdoor CPE
TP-Link’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.
Enterprise Hardware
With Qualcomm Atheros level chipsets, high gain antennas and high
quality material, specially designed enclosure, and PoE power supply, CPE210 is
specially designed for outdoor use and can operate flawlessly in almost any climate,
with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).
Qualcomm Atheros 650MHz CPU
High power Tx and high sensitivity Rx radio front-end design
Advanced Antenna System
- Built-in High Gain Dual-Polarized Antenna
- Dedicated metal reflector ensures higher gain
and lower noise interference
Horizontal Elevation
Horizontal Azimuth
Vertical Elevation
Vertical Azimuth
5km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission over 5km+, tested in the field.
5km+
TP-Link MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.
Total Throughput*
MAXtream TDMA Mode
802.11 CSMA Mode
Real throughput depends on the actual application environment.
Quantity of Clients
Pharos Control – Centralized Management System
CPE210 also comes equipped with centralized management software that helps users easily
manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery,
status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.
PharOS
User-friendly web-based
management system allows
professionals to do more specific
configurations.
2.4GHz 300Mbps 9dBi Outdoor CPE CPE210
AP / Client / AP Router /
AP Client Router (WISP) operation modes
Weather Proof Enclosure
Passive PoE Adapter
Built-in 9dBi Dual-polarized
Directional Antenna
6000V Lightning Protection
15KV ESD Protection
Casos relacionados
-
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
“The performance of CPE was better than expected, working stable even with -85 dBm of received power.” —David Grillo, Engineer, Kroton -
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
“Amazing! The performance of the Pharos Wireless Broadband Solution has exceeded even our wildest expectations.” —Bagus Prakoso, Owner of ADINET
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Procesador | Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
| Memoria | 64MB DDR2 RAM, 8MB Flash |
| Interface | 1 Puerto Ethernet Blindado 10/100Mbps (LAN0, en Pasivo PoE) 1 Puerto Ethernet Blindado 10/100Mbps (LAN1, Passive PoE Passthrough) 1 Terminal puesta a tierra 1 Botón Reset |
| Fuente de alimentación | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Rango de Voltaje: 16-27VDC |
| Consumo de Poder | 10.5 Watts Max Nota: Cuando se implementa usando PoE pasivo, la potencia extraída de la fuente de alimentación será más alto por una cierta cantidad dependiendo de la longitud del cable de conexión. |
| Dimensiones (An x Pr x Al) | 224 x 79 x 60 mm |
| Tipo de Antena | 2 Antenas Direccionales Incorporadas de 9dBi con Polarizado Dual Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: Para más detalles, lee la hoja de datos |
| Protección | Protección 15KV ESD Protección Contra Rayos 6000V |
| Recinto | Material plástico de ASA estabilizado al aire libre IPX5 Certificación a prueba de agua |
| CARACTERÍSTICAS INALÁMBRICAS | |
|---|---|
| Estándares inalámbricos | IEEE 802.11b/g/n (con Pharos MAXtream deshabilitado) |
| Protocolo propietario | Modo TDMA (con Pharos MAXtream habilitado) |
| Velocidades inalámbricas | Hasta 300Mbps (40MHz,Dinámica) Hasta 144.4Mbps (20MHz,Dinámica) Hasta 72.2Mbps (10MHz,Dinámica) Hasta 36.1Mbps (5MHz,Dinámica) |
| Frecuencia | 2.4~2.483GHz Nota: la frecuencia de funcionamiento disponible puede variar en función de las limitaciones de los países o regiones en los que se utiliza el dispositivo. |
| Sensibilidad de recepción | • 802.11b: 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm • 802.11g: 54M: -79dBm, 48M: -80dBm, 36M: -84dBm, 6-24M: -88dBm • 802.11n: MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm, MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm, MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm, MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm, MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm, MCS0: -96dBm |
| Poder de transmision | 27dBm / 500mw (potencia ajustable por 1dBm) Nota: la potencia de transmisión máxima puede variar a través de diferentes canales en función de las limitaciones de los países o regiones en los que se utiliza el dispositivo. |
| FUNCIONES DE SOFTWARE | |
|---|---|
| Configuraciones inalámbricas | Tecnología Pharos MAXtream TDMA Modos 802.11a/n Ancho de Canal Seleccionable: 5/10/20/40MHz Selección Automática de Canal Transmisión de Control de Potencia Selección dinámica de frecuencias (DFS) WDS Activar / Desactivar Seguridad:Encriptación WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) , Encriptación 64/128/152-bit WEP SSID Broadcast Activado / Descativado Multi-SSID con VLAN Tagging (AP mode only) Ajuste de tiempo de espera Distancia/ACK Filtro de Dirección MAC Inalámbrica Inalámbrico Avanzado: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Gestión | Administración y Descubrimiento Remotoa través de la aplicación Pharos Control Administración basada en HTTP/HTTPS Registro de Sistema SNMP Agent(v2c) Ping Watch Dog DDNS Dinámica Servidor SSH |
| Herramientas de sistema | Indicadores de Calidad de Señal Inalámbricas: Intensidad de Señal/Ruido/Transmisión CCQ/CPU/Monitores de Memoria: Throughput/Estaciones/Interfaces/ARP/Rutas/WAN/DHCP Analizador de Espectro Examen de Velocidad Ping Traceroute |
| Optimizaciones a nivel de sistema | IGMP Optimizado / proxy para aplicaciones de multidifusión Hardware watch dog |
| CARACTERÍSTICAS DEL ADAPTADOR POE | |
|---|---|
| Dimensiones(Al x An x Pr) | 110*57*33.5mm |
| Interfaces | 1 AC Jack with Earth Ground 1 Puerto Ethernet Blindado 10/100Mbps (Alimentación + Datos) 1 Puerto Ethernet Blindado 10/100Mbps (Datos) |
| Botón | Botón Remote Reset |
| LED de estado de energía | 0~0.8A: Verde 0.8A~1.0A: Rojo |
| Aporte | 100-240VAC, 50/60Hz |
| Voltaje de entrada | 100VA~240VAC @ 50Hz~60Hz |
| Corriente de entrada | 0.8A Max @ 100VAC |
| Producción | 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Soporta hasta 60m Power over Ethernet) |
| Tensión de salida | 24VDC(+4,5pins; -7,8pins) |
| Eficiencia | >80% |
| Certificaciones | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| OTROS | |
|---|---|
| Certificación | CE, FCC, RoHS, IPX5 |
| contenidos del paquete | CPE De Exterior Inalámbrico Adaptador Pasivo PoE 24V 1A Correas par Montaje en Poste Cable de alimentación AC Guía de instalación |
| Requisitos del sistema | Microsoft Windows 98SE, NT, 2000, XP, Vista™ o Windows 8, Windows 7, MAC OS, NetWare, UNIX o Linux. Nota: Te recomendamos utilizar uno de los siguientes navegadores web para una experiencia de usuario mejorada: Google Chrome, Safari y Firefox. No se recomiendan los navegadores IE. |
| Ambiente | Temperatura de Funcionamiento: -30°C~70°C (-22℉~158℉) Temperatura de Almacenamiento: -40℃~70℃ (-40℉~158℉) Humedad de Funcionamiento: 10%~90% sin condensación Humedad de Almacenamiento: 5%~95% sin condensación |
*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*Power supply distances are based on test results under normal usage conditions. Actual power supply distance will vary as a result of 1) AP status, including transmit power, connected devices and network traffic, 2) cable properties, including type and texture and 3) environmental factors, which include temperature and humidity.